Port details |
- py-DateTime Zope 2 DateTime data type
- 3.0.3_1,1 devel =2 3.0.3_1,1Version of this port present on the latest quarterly branch.
- Maintainer: zope@FreeBSD.org
- Port Added: 2011-10-10 00:45:02
- Last Update: 2023-06-27 19:34:34
- Commit Hash: 3d9a815
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python zope
- License: ZPL21
- WWW:
- https://pypi.org/project/DateTime/
- Description:
- This package provides a DateTime data type, as known from Zope 2.
Unless you need to communicate with Zope 2 APIs, you're probably
better off using Python's built-in datetime module.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}DateTime>0:devel/py-DateTime@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-DateTime/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-DateTime
- pkg install py39-DateTime
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py39-DateTime listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-DateTime
- Package flavors (<flavor>: <package>)
- distinfo:
- SHA256 (zope/DateTime-3.0.3.zip) = 076155f509ac122effb2be32576540ba4a5cca56de557c4bc206980e4017a8c3
SIZE (zope/DateTime-3.0.3.zip) = 85359
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-pytz>=0 : devel/py-pytz@py39
- py39-zope.interface>=0 : devel/py-zope.interface@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- This port is required by:
- for Run
-
- finance/py-finvizfinance
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:
- No options to configure
- Options name:
- devel_py-DateTime
- USES:
- python zip
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
3.0.3_1,1 27 Jun 2023 19:34:34 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
3.0.3_1,1 11 Jan 2023 15:58:34 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
3.0.3_1,1 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
3.0.3_1,1 25 Mar 2022 13:38:07 |
Po-Chuan Hsieh (sunpoet) |
devel/py-DateTime: Fix build with setuptools 58.0.0+
With hat: python |
3.0.3_1,1 07 Apr 2021 08:09:01 |
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
3.0.3_1,1 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
3.0.3_1,1 28 Dec 2020 23:02:15 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
3.0.3_1,1 20 Jun 2018 17:05:44 |
mat |
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight |
3.0.3_1,1 25 Apr 2018 16:42:38 |
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
3.0.3_1,1 08 Feb 2018 20:18:09 |
amdmi3 |
Canonicalize PyPi WWWs:
- Switch to https://
- Remove trailing slashes
Approved by: portmgr blanket |
3.0.3_1,1 30 Nov 2017 15:50:34 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
3.0.3_1,1 01 Apr 2016 14:00:57 |
mat |
Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.
With hat: portmgr
Sponsored by: Absolight |
3.0.3_1,1 20 Oct 2014 16:04:14 |
mva |
- Convert ports of devel/ to USES=python
Approved by: portmgr (implicit) |
07 Mar 2014 16:49:10
|
bapt |
Convert d* to USES=zip |
3.0.3_1,1 24 Jan 2014 21:28:23 |
rm |
- convert to auto-generated packing list
- bump PORTREVISION |
3.0.3,1 13 Jan 2014 21:00:04 |
rene |
Python cleanup:
- USE_PYTHON* = 2.X -> USE_PYTHON* = 2
- USE_PYTHON* = 2.X+ -> USE_PYTHON* = yes
Reviewed by: python (mva, rm)
Approved by: portmgr-lurkers (mat) |
3.0.3,1 23 Sep 2013 09:18:56 |
rm |
Update Plone to 4.3.2.
Release notes:
http://plone.org/products/plone/releases/4.3
http://plone.org/products/plone/releases/4.3.1
http://plone.org/products/plone/releases/4.3.2
This update includes:
-devel/py-DateTime: 3.0 -> 3.0.3
-devel/py-Products.ATContentTypes: 2.1.12 -> 2.1.13
-devel/py-Products.Archetypes: 1.8.6 -> 1.9.4
-devel/py-Products.CMFDiffTool: 2.0.2 -> 2.1
-devel/py-Products.CMFDynamicViewFTI: 4.0.3 -> 4.0.5
-devel/py-Products.GenericSetup: 1.7.3 -> 1.7.4
-devel/py-Products.MimetypesRegistry: 2.0.4 -> 2.0.5 (Only the first 15 lines of the commit message are shown above ) |
3.0,1 20 Sep 2013 17:13:47 |
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
devel part 3) |
3.0,1 13 Aug 2012 16:26:39 |
rm |
Import Zope 2.13.16 and update this release required dependencies:
- devel/py-DateTime: 3.0b3 -> 3.0
- security/py-AccessControl: 2.13.7 -> 2.13.8 |
3.0b3 12 Apr 2012 02:30:54 |
ak |
Fix various errors in ports distinfo
(yii-1.1.9.r3527.tar.gz verified against upstream sources) |
3.0b3 16 Jan 2012 10:33:34 |
rm |
- transfer maintainership for my zope-ports to zope@
- add them to virtual category `zope' |
3.0b3 14 Nov 2011 23:17:37 |
rm |
- update to 3.0b3
PR: ports/161975
Submitted by: rm (myself)
Approved by: novel (mentor)
Feature safe: yes |
3.0b1 10 Nov 2011 22:20:18 |
rm |
Change email for my ports to FreeBSD one.
Approved by: novel (mentor)
Feature safe: yes |
3.0b1 10 Oct 2011 00:44:36 |
wen |
This package provides a DateTime data type, as known from Zope 2.
Unless you need to communicate with Zope 2 APIs, you're probably
better off using Python's built-in datetime module.
WWW: http://pypi.python.org/pypi/DateTime
Submitted by: Ruslan Mahmatkhanov <cvs-src@yandex.ru> (via email) |