Port details |
- py-qt6-sip Python to C and C++ bindings generator
- 13.8.0 devel =2 13.6.0Version of this port present on the latest quarterly branch.
- Maintainer: kde@FreeBSD.org
- Port Added: 2022-11-09 09:51:08
- Last Update: 2024-10-19 06:35:03
- Commit Hash: d31d645
- People watching this port, also watch:: jdictionary, py311-Automat, py311-python-gdsii, py39-PyOpenGL, p5-Sane
- Also Listed In: python
- License: BSD2CLAUSE
- WWW:
- https://pypi.org/project/PyQt6-sip/
- Description:
- SIP is a tool for generating Python bindings for C and C++ libraries.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}PyQt6-sip>0:devel/py-qt6-sip@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/devel/py-qt6-sip/ && make install clean
- To add the package, run one of these commands:
- pkg install devel/py-qt6-sip
- pkg install py311-PyQt6-sip
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py311-PyQt6-sip listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py311-PyQt6-sip
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1729208051
SHA256 (PyQt6_sip-13.8.0.tar.gz) = 2f74cf3d6d9cab5152bd9f49d570b2dfb87553ebb5c4919abfde27f5b9fd69d4
SIZE (PyQt6_sip-13.8.0.tar.gz) = 92264
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py311-setuptools>0 : devel/py-setuptools@py311
- py311-wheel>0 : devel/py-wheel@py311
- python3.11 : lang/python311
- py311-build>=0 : devel/py-build@py311
- py311-installer>=0 : devel/py-installer@py311
- Test dependencies:
-
- python3.11 : lang/python311
- Runtime dependencies:
-
- python3.11 : lang/python311
- This port is required by:
- for Build
-
- deskutils/calibre
- devel/py-qt6-pyqt
- net/libarcus
- for Run
-
- deskutils/calibre
- devel/py-qt6-pyqt
- net/libarcus
Configuration Options:
- No options to configure
- Options name:
- devel_py-qt6-sip
- USES:
- python pyqt:6
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Number of commits found: 7
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
13.8.0 19 Oct 2024 06:35:03 |
Jason E. Hale (jhale) |
PyQt: Update to latest versions
PyQt5:
- devel/py-qt5-pyqt: Update to 5.15.11
- graphics/py-qt5-3d: Add port
- net/py-qt5-networkauth: Update to 5.15.6
- www/py-qt5-webengine: Update to 5.15.7
- x11-toolkits/py-qt5-chart: Update to 5.15.7
- x11-toolkits/py-qt5-datavis3d: Add port
PyQt6:
- devel/py-qt6-pyqt: Update to 6.7.1
Build tools:
- devel/sip: Update to 6.8.6
- devel/py-qt5-sip: Update to 12.15.0
- devel/py-qt6-sip: Update to 13.8.0
- devel/py-qtbuilder: Update to 1.16.4
The build tools are now all licensed BSD2CLAUSE and have been converted
to PEP517. |
13.6.0 16 Oct 2023 23:57:46 |
Jason E. Hale (jhale) |
PyQt6: Update to latest versions
- PyQt6: Update to 6.5.3
- PyQt6-sip: Update to 13.6.0 |
13.5.2_1 27 Jul 2023 22:11:04 |
Jason E. Hale (jhale) |
PyQt: Update to latest versions
- PyQt6: update to 6.5.2
- PyQt6-Charts: update to 6.5.0
- PyQt6-NetworkAuth: update to 6.5.0
- PyQt6-WebEngine: update to 6.5.0
- QScintilla: update to 2.14.1
- PyQt6-sip: update to 13.5.2
- PyQt-builder: update to 1.15.2
- sip: update to 6.7.9 |
13.4.1_1 26 Jul 2023 19:58:56 |
Loïc Bartoletti (lbartoletti) |
devel/qt6: bump dependent ports |
13.4.1 27 Jun 2023 19:34:34 |
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
13.4.1 09 Mar 2023 11:15:07 |
Loïc Bartoletti (lbartoletti) |
PyQt: Update to latest versions
- PyQt5: update to 5.15.9
- PyQt6: upate to 6.4.2
- PyQt6-sip: update to 13.4.1
- PyQt5-sip: update to 12.11.1
- PyQt-builder: update to 1.14.1
- sip: upate to 6.7.7
PR: 269751
Exp-run by: antoine |
13.4.0 09 Nov 2022 09:47:49 |
Guido Falsi (madpilot) |
*/*pyqt*: Add pyqt6 ports
Reviewed by: tcberner, lbartoletti, fluffy
Approved by: kde (tcberner, lbartoletti, fluffy), portmgr (tcberner)
Differential Revision: https://reviews.freebsd.org/D37191 |
Number of commits found: 7
|