Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

games: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <benlutz@datacomm.ch>
  *  <janos.mohacsi@bsd.hu>
  *  Aaron Baugher
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron VonderHaar <avh4@usa.net>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Adam Kranzel (adam@alameda.edu)
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

graphics/mesa-libs: Bump reverse deps for libglvnd

Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.

PR:		246767
Reviewed by:	manu, bapt
Approved by:	x11
Differential Revision:	https://reviews.freebsd.org/D30824

Remove # $FreeBSD$ from Makefiles.

Add missing USES=xorg for my ports

Add missing USES=sdl for my ports

(and also reorder a few things)

Add missing USES=gl to my ports

Fix build on -CURRENT

Revision bump of all ports with USE_GL after consolidation of mesa-libs

Approved by:	swills (mentor)
Differential Revision:	https://reviews.freebsd.org/D10845

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

Bump portrevision after png update

Change libpng15.so to libpng.so in LIB_DEPENDS to prepare the upgrade

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

Remove @dirrm/@dirrmty from my ports

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Switch to USES=tar for my ports

Fix double occurences of USES=

- Fix build on CURRENT
- Enable staging
- Re-order LIB_DEPENDS and switch to new format
- Update USES

- Remove manual creation and removal of share/applications, as it's now in the
mtree (games category)

Approved by:	portmgr (bdrewery)

Add NO_STAGE all over the place in preparation for the staging support (cat:
games)

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

- update png to 1.5.10

Remove quotes from BROKEN and IGNORE as they are not required

Approved by:    maintainer

- Update devel/sdl12 to 1.2.15
- Update audio/sdl_mixer to 1.2.15
- Update graphics/sdl_image to 1.2.12
- Update graphics/sdl_ttf to 2.0.11
- Update graphics/sdl_gfx to 2.0.23
- Update net/sdl_net to 1.2.8
- Bump PORTREVISIONs on ports that depend on one or more packages due to
ABI and shared library version changes
- Update Mk/bsd.sdl.mk accordingly for the new shared library versions

Tested by:      exp-run by pav

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

-remove MD5

Add missing LICENSE

Approved by:    ehaupt (mentor)

Update MAINTAINER address for my ports

Approved by:    ehaupt (mentor)

- Update MAINTAINER address for Ganael Laplanche <ganael.laplanche@martymac.org>
- Update some MASTER_SITES too

PR:             ports/150349
Submitted by:   maintainer

- Update graphics/sdl_ttf to version 2.0.10
- Bump portrevisions for all ports depending on graphics/sdl_ttf
- Update Mk/bsd.sdl.mk for the new shared library version.

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- fix build for png-1.4.1

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:             ports/142147 ports/142248 ports/142249
Approved by:    miwi (mentor implicit)

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 0.5.7
- Take maintainership

PR:             ports/122342
Submitted by:   Ganael Laplanche <ganael.laplanche@martymac.com>

- Remove USE_XLIB in favor of USE_XORG

PR:             121971
Submitted by:   Chess Griffin <chess@chessgriffin.com>

- Chase devel/sdl12 shlib version bump

Use system compiler on CURRENT

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 0.5.6

- Remove FreeBSD 4.X support from unmaintained ports in categories starting
  with letter f-h

- Remove duplicate USE_XLIB entry

Submitted by:   drnez

- Update to 0.5.5
- Respect X11BASE

PR:             ports/106156
Submitted by:   trasz

Back out CONFIGURE_ARGS change, it is already handled by USE_XLIB and
GNU_CONFIGURE.

Reported by:    rafan

Respect X11BASE and USE_XLIB

Reported by:    pointyhat

 - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
   structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)

Add missing locale files to plist.

PR:             ports/101510
Submitted by:   Stanislav Sedov <ssedov@mbsd.msk.ru>

- Mark BROKEN on 4.x
- Add USE_GETTEXT

PR:             ports/98881
Submitted by:   maintainer

Remove USE_REINPLACE for categories starting with a G

Add missing USE_ICONV

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

update to 0.5.4

- Add SHA256

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 0.5.1

PR:             ports/77134
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Update to version 0.5

PR:             ports/75622
Submitted by:   Ports Fury

Fix the build with gcc 3.4.

PR:             ports/71845
Submitted by:   Sergio Mangialardi
Approved by:    portmgr (will).

BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

Drop maintainership.

- Remove USE_SIZE knob

Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5

- Do not mark broken on 5.x
* According to last bento run, they build just fine.

BROKEN on 5.x: configure fails

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

- SIZEify

- Use new bsd.sdl.mk knobs

- Update to version 0.4.2

- Add missing dependency

Reported by:    bento (kris)

Add briquolo 0.4.1, breakout clone with an OpenGL 3D representation.