x11/nvidia-driver-devel, x11/nvidia-kmod-devel, x11/linux-nvidia-libs-devel,
graphics/nvidia-drm*-kmod-devel, graphics/externalplatform,
graphics/egl-wayland, graphics/egl-x11 : Update to 590.48.01
Update "-devel" variants to latest New Feature Branch [NFB]
of drivers 590.48.01:
https://www.nvidia.com/en-us/drivers/details/259269/
Linux counterparts for x11/linux-nvidia-libs:
https://www.nvidia.com/en-us/drivers/details/259267/
! Important note !
As already notified by HEADSUP at freebsd-ports ML [1],
this version drops support for a bunch of old GPUs
prior to Turing Generation of the architecture.
Anyone using dropped GPUs need to switch to master ports,
currently at 580.119.02.
Note that once 590 series or later drivers become Production
Branch of drivers, new legacy branch -580 would be created.
See "Appendix A. Supported NVIDIA GPU Products" in README [2]
whether or not your GPU is still supported or not before
upgrading.
While here, update underlying EGL components as below:
graphics/externalplatform: 1.2.1
graphics/egl-wayland : 1.1.20
And added one more EGL component that Linux version already has:
graphics/egl-x11
One more EGL component to come in the future if it is tagged
with non-RC number on hopefully next driver ports upgrade.
[1] https://lists.freebsd.org/archives/freebsd-ports/2025-December/008804.html
[2]
https://us.download.nvidia.com/XFree86/FreeBSD-x86_64/590.48.01/README/supportedchips.html
PR: 292027
Differential Revision: https://reviews.freebsd.org/D54414
graphics/py-pyogrio: Add py-pyogrio 0.12.1
Pyogrio provides fast, bulk-oriented read and write access to GDAL/OGR vector
data sources, such as ESRI Shapefile, GeoPackage, GeoJSON, and several others.
Vector data sources typically have geometries, such as points, lines, or
polygons, and associated records with potentially many columns worth of data.
The typical use is to read or write these data sources to/from GeoPandas
GeoDataFrames. Because the geometry column is optional, reading or writing only
non-spatial data is also possible. Hence, GeoPackage attribute tables, DBF
files, or CSV files are also supported.
Pyogrio is fast because it uses pre-compiled bindings for GDAL/OGR to read and
write the data records in bulk. This approach avoids multiple steps of
converting to and from Python data types within Python, so performance becomes
primarily limited by the underlying I/O speed of data source drivers in
GDAL/OGR.
We have seen >5-10x speedups reading files and >5-20x speedups writing files
compared to using row-per-row approaches (e.g. Fiona).
graphics/materialx: Add new port
MaterialX is an open standard for representing rich material and
look-development content in computer graphics, enabling its
platform-independent description and exchange across applications and
renderers.
PR: 283175
graphics/py-pandarm: Add py-pandarm 0.0.2
A pandas-centric interface to highly performant travel network analysis
leveraging contraction hierarchies provided by code from the Open Source Routing
Machine (OSRM). Hence, the pandas routing machine, pandarm. This package is a
friendly fork of the pandana library, originally written by Fletcher Foti and
UrbanSim Inc. Despite fantastic work by the original authors, maintaining
open-source software is a great deal of work and the pandana library is no
longer compatible with the current pydata stack (specifically as of numpy
version 2.0). This fork reinstates compatibility and brings along a few new
modern touches and enhancements. Pull requests are very welcome.
Main features of the package include:
- multi-threaded calculation of shortest path routes and distances
- network aggregations (i.e. accessibility metrics)
- network-based isochrones
graphics/xreader: move and update to 4.6.0
This started as a fork of graphics/atril, which in turn forked from
graphics/evince, so move categories to match.
- make PDF and pixbuf support unconditional, support for those
formats are always expected
- optionalise NLS, previewer, thumbnailer
- exclude DOCS as upstream is still evaluating the build issue
graphics/py-rlpycairo: New port
This is a plugin for the ReportLab PDF Toolkit, which constructs rich
PDF documents, and is also used for the creation of charts in a variety
of bitmap and vector formats.
This plugin is intended to replace most of the usage of the libart based
C extension _renderPM which has been shown to have issues when rendering
complex documents.
PR: 290921
graphics/py-dj52-sorl-thumbnail: New port
The sorl-thumbnail package provides an easy way to generate image
thumbnails.
Some of its features:
- Storage support
- Pluggable Engine support for Pillow, GraphicsMagick, ImageMagick and Wand
- Pluggable Key Value Store support (cached db and redis)
- Pluggable Backend support
- Admin integration with possibility to delete
- Dummy generation (placeholders)
- Flexible, simple syntax, generates no html
- ImageField for model that deletes thumbnails
- CSS style cropping options
- Back smart cropping, and remove borders from the images when cropping
- Margin calculation for vertical positioning
- Alternative resolutions versions of a thumbnail
This is a Django 5.2.X specific clone.
graphics/skia: 2D graphics library
Skia is an open source 2D graphics library which provides common APIs that
work across a variety of hardware and software platforms. It serves as the
graphics engine for Google Chrome and ChromeOS, Android, Flutter, and many
other products.
WWW: https://skia.org/
PR: 290371
graphics/nvidia-drm-latest-kmod, graphics/nvidia-drm-latest-kmod-devel: Add new
port
Add missing graphics/nvidia-drm-latest-kmod and
graphics/nvidia-drm-latest-kmod-devel which corresponding with
graphics/drm-latest-kmod.
PR: 290262
Differential Revision: https://reviews.freebsd.org/D53128
graphics/R-cran-rgl: New port
Provides medium to high level functions for 3D interactive graphics, including
functions modelled on base graphics (plot3d(), etc.) as well as functions for
constructing representations of geometric objects (cube3d(), etc.). Output may
be on screen using OpenGL, or to various standard 3D file formats including
WebGL, PLY, OBJ, STL as well as 2D image formats, including PNG, Postscript,
SVG, PGF.
graphics/R-cran-ggforce: New port
The aim of 'ggplot2' is to aid in visual data investigations. This focus has led
to a lack of facilities for composing specialised plots. 'ggforce' aims to be a
collection of mainly new stats and geoms that fills this gap. All additional
functionality is aimed to come through the official extension system so using
'ggforce' should be a stable experience.
graphics/R-cran-tweenr: New port
In order to create smooth animation between states of data, tweening is
necessary. This package provides a range of functions for creating tweened data
that can be used as basis for animation. Furthermore it adds a number of
vectorized interpolaters for common R data types such as numeric, date and
colour.
graphics/wallust: add port: Generate colors from an image
wallust is a command line tool for creating 16 color palettes, since
it was the original intent of pywal, the tool that inspired the
creation of wallust.
WWW: https://explosion-mental.codeberg.page/wallust/
graphic/drm-next-kmod: New port tracking latest non-LTS version of DRM drivers
This port will allow users to use the latest version of the DRM drivers.
It will only be available for FreeBSD -CURRENT and possibly the
upcoming/latest release (such as the upcoming 15.0-RELEASE at the time
of this commit), depending how linuxkpi changes are backported to stable
branches.
This version is unlikely to be LTS because LTS versions are provided
by dedicated ports such as `graphics/drm-66-kmod`.
Also because this port does not track a specific version (but the
latest), it may not be as stable as the LTS-tracking ports. It is still
made available because it will make it easier for users to test that
latest version of DRM drivers.
Sponsored by: The FreeBSD Foundation
graphics/gexiv2_016: add GExiv2 0.16.0
GExiv2 0.16 is a major change over version 0.14, breaking API and
changing file locations. Existing software will need more than trivial
changes to use this. Fortunately, GExiv2 versions 0.16 and 0.14 can
be installed in parallel without conflicts.
GExiv2 is added as a new port, so consumers can switch to this version
at their own pace.
Release Notes:
https://gitlab.gnome.org/GNOME/gexiv2/-/blob/0.16.0/NEWS
graphics/hvif-tools: New port: Toolkit for converting HVIF icons to SVG and back
A small set of command‑line tools to work with the Haiku Vector Icon
Format (HVIF).
https://github.com/threedeyes/hvif-tools
PR: 289362
graphics/hyprland-protocols: add port: Wayland protocol extensions for Hyprland
This package exists in an effort to bridge the gap between Hyprland
and KDE/Gnome's functionality, as well as allow apps for some extra
neat functionality under Hyprland.
Since wayland-protocols is slow to change (on top of Hyprland not
being allowed to contribute), we have to maintain a set of protocols
Hyprland uses to plumb some things / add some useful features.
Some of the protocols here also do not belong in wayland-protocols, as
they are specific to Hyprland.
WWW: https://github.com/hyprwm/hyprland-protocols
graphics/rigsofrods-pagedgeometry: Rename to graphics/pagedgeometry, switch
upstream with fix build with ogre3d 1.14
The version of pagedgeometry from rigsofrods seems to lagg behind the
one from OGRECave. Since looking at the current build dependencies of
rigsofrods, it appears that they are using pagedgeometry from OGRECave
instead of their own fork.
PR: 287838
x11/nvidia-driver-devel, x11/linux-nvidia-libs-devel,
graphics/nvidia-drm[,510,515,61,66]-kmod-devel: Add new ports
Add *-devel versions of nvidia drivers
These ports provides supports for New Feature Branch (NFB) of upstream
nvidia drivers like existing legacy branches of ports.
In some cases, supports for cutting edge GPUs are provided via
NFB of driver packages or Beta branch of drivers.
As Beta Branch of drivers cannot be recommended widely, we decided to
add support for NFB as *-devel version.
This new *-devel versions tracks the latest non-Beta versions
regardless it's NFB or Production Branch of drivers.
This is because, in some cases, major version of Production Branch
of drivers are bumped to larger than the one for corresponding
NFB.
So depending on the timing, *-devel 100% matches non-devel
master ports except for its package name.
Our upgrading policies are:
1. Start investigating whether some additional works are needed to
build/install/run or not when new Beta is found to be released
upstream.
2. If any additional works were needed and done, upgrade master ports
below without updating version nor PORTREVISION of master ports below.
x11/nvidia-driver x11/linux-nvidia-libs graphics/nvidia-drm-*-kmod
and as needed, graphics/nvidia-drm-kmod/Makefile.common would be
updated, too.
3. Once findng new NFB is released upstream, bump versions of *-devel.
Step 2 would "usually" ease this work unless Beta is skipped or
last-minutes breaking changes are introduced.
4. Once finding new Production Branch is released upstream, bump
versions of master ports.
5. Once finding any of Legacy Branch of driver is released upstream,
upgrade corresponding legacy ports. This could need some additional
work, because updated version could incorporate patches from our ports.
Note that graphics/nvidia-drm-*-kmod does NOT support any of
exisiting legacy versions, as they don't yet have codes to
support these ports.
PR: 287268
Differential Revision: https://reviews.freebsd.org/D50697
graphics/gowall: New port: Versatile tool to process images
Gowall is a versatile tool to convert an image (specifically a wallpaper)
to any color-scheme and/or pallete you like! It also offers a bunch of
image processing features like image to pixel art, image upscaling, and
color palette extraction.
WWW: https://github.com/Achno/gowall
PR: 282799
Reported by: Yusuf Yaman <nxjoseph@protonmail.com> (new maintainer)
graphics/libopendrive: Add libopendrive 0.5.0
libOpenDRIVE is a lightweight, dependency-free, fast C++ library providing
OpenDRIVE file parsing and 3D model generation.
It's small and can be easily integrated in other projects. A core function is
the parsing of OpenDRIVE files and the generation of 3D models. The library
targets OpenDRIVE version 1.4.
graphics/qb3: Add qb3 1.3.2
QB3: Image/Raster Compression, Fast and Efficient
- Better compression than PNG in most cases
- Lossless compression and decompression rate of 500MB/sec for byte data,
4GB/sec for 64 bit data
- All integer types, signed and unsigned, 8 to 64bit per value
- Lossless, or lossy by division with a small integer (quanta)
- No significant memory footprint during encoding or decoding
- No external dependencies, very low complexity
graphics/kealib: Add kealib 1.6.2
KEALib provides an implementation of the GDAL data model. The format supports
raster attribute tables, image pyramids, meta-data and in-built statistics while
also handling very large files and compression throughout.
Based on the HDF5 standard, it also provides a base from which other formats can
be derived and is a good choice for long term data archiving. An independent
software library (libkea) provides complete access to the KEA image format and a
GDAL driver allowing KEA images to be used from any GDAL supported software.
graphics/libicd: Add libicd 0.0.0.20250416
libicd, image codec library, provides a uniform API to multiple raster codecs.
It supports the following raster formats:
- JPEG : libicd includes jpeg 12bit sources, and uses system provided jpeg 8
library. Supports the JPEG Zen extension (zero mask)
- PNG : Uses system provided PNG
- LERC1 : Rewrite of LERC1 for floating point rasters and mask
- QB3 : Integer lossless compression, optional, use -DUSE_QB3=ON as an argument
to cmake
graphics/libertiff: Add libertiff 0.0.0.20250111
Libertiff is a C++11 simple, header-only, TIFF reader. It is MIT licensed.
Handles both ClassicTIFF and BigTIFF, little-endian or big-endian ordered.
The library does not offer codec facilities (and probably won't). It is mostly
aimed at browsing through the linked chain of Image File Directory (IFD) and
their tags.
"Offline" tag values are not loaded at IFD opening time, but only upon request,
which helps handling files with tags with an arbitrarily large number of values.
The library is thread-safe (that is the instances that it returns can be used
from multiple threads), if passed FileReader instances are themselves
thread-safe.
The library does not throw exceptions (but underlying std library might throw
exceptions in case of out-of-memory situations)
Optional features:
- define LIBERTIFF_C_FILE_READER before including libertiff.hpp, so that the
libertiff::CFileReader class is available
graphics/gdalcpp: Add gdalcpp 1.3.0
gdalcpp is a C++11 wrapper classes for GDAL/OGR.
These are some small wrapper classes for GDAL offering:
- classes with RAII instead of the arcane cleanup functions in stock GDAL
- works with GDAL 1, 2, and 3
- allows you to write less boilerplate code
The classes are not very complete, they just have the code I needed for various
programs.
graphics/py-term-image: New port
term-image is a Python utility that enables the display of images directly
within the terminal, providing a unique and innovative way to view images
without leaving the command line interface. It supports various image
formats and can be used in a range of applications, from simple image
viewing to more complex terminal-based projects.
PR: 285236
Reported by: Yusuf Yaman <nxjoseph@protonmail.com>
graphics/embree: update Intel Embree to version 4.2.0
Versions 4.x have default values for ZIP mode and ISPC support
flipped, change them back in our port to avoid breaking POLA.
Preserve version 3.13.5 as `graphics/embree3' port and reroute
consumers to it due to incompatible API of the modern Embree.
PR: 285134
graphics/gdk-pixbuf-extra: add default-disabled loaders
With the new port, remove OTHERS from graphics/gdk-pixbuf2, and add
corresponding helper to USES=gnome. Ports using the affected loaders
should declare USE_GNOME=gdkpixbufextra.
PR: 285185
graphics/R-cran-webp: new port
Lossless webp images are 26% smaller in size compared to PNG. Lossy webp images
are 25-34% smaller in size compared to JPEG. This package reads and writes webp
images into a 3 (rgb) or 4 (rgba) channel bitmap array using conventions from
the 'jpeg' and 'png' packages.
graphics/nvidia-drm-66-kmod: add new port
This adds the corresponding nvidia-drm port for drm-66-kmod. This
chases commit 00508c01e276.
Sponsored by: NVIDIA
Reviewed by: kbowling (mentor), manu
Differential Revision: https://reviews.freebsd.org/D49065
graphics/xiccd: X color profile daemon
The primary goal of xiccd is providing color profile support for desktop
environments other than Gnome and KDE (Xfce, LXDE, and probably others)
that don't support native color management yet.
It does basically the same as the "gnome-settings-daemon" color plugin or
"colord-kde" but doesn't depend on any particular desktop. It doesn't even
depend on GTK so it doesn't create a unnecessary GTK3 dependency if the
desktop environment is GTK2-based or vice versa.
WWW: https://github.com/agalakhov/xiccd
PR: 283826
graphics/drm-66-kmod: Add new port
Add drm-66-kmod which tracks linux 6.6-lts.
Currently synced with 6.6.25
Sponsored by: Beckhoff Automation GmbH & Co. KG
graphics/R-cran-R.devices: new port
Functions for creating plots and image files in a unified way regardless of
output format (EPS, PDF, PNG, SVG, TIFF, WMF, etc.). Default device options as
well as scales and aspect ratios are controlled in a uniform way across all
device types. Switching output format requires minimal changes in code. This
package is ideal for large-scale batch processing, because it will never leave
open graphics devices or incomplete image files behind, even on errors or user
interrupts.
graphics/sdl3_image: add port
This is a simple library to load images of various formats as SDL surfaces.
It can load BMP, GIF, JPEG, LBM, PCX, PNG, PNM (PPM/PGM/PBM), QOI,
TGA, XCF, XPM, and simple SVG format images. It can also load AVIF,
JPEG-XL, TIFF, and WebP images, depending on build options
graphics/sdl3_ttf: add port
This library is a wrapper around the FreeType and Harfbuzz libraries,
allowing you to use TrueType fonts to render text in SDL applications.
It allows a programmer to use multiple TrueType fonts without having
to code a font rendering routine themselves. With the power of
outline fonts and antialiasing, high quality text output can be
obtained without much effort.
graphics/libultrahdr: Add libultrahdr 1.4.0
libultrahdr is an image compression library that uses gain map technology to
store and distribute HDR images. Conceptually on the encoding side, the library
accepts SDR and HDR rendition of an image and from these a Gain Map (quotient
between the two renditions) is computed. The library then uses backward
compatible means to store the base image (SDR), gain map image and some
associated metadata. Legacy readers that do not support handling the gain map
image and/or metadata, will display the base image. Readers that support the
format combine the base image with the gain map and render a high dynamic range
image on compatible displays.
graphics/p5-Geo-LibProj-FFI: Add p5-Geo-LibProj-FFI 1.00
Geo::LibProj::FFI is a foreign function interface to the PROJ coordinate
transformation / projection library. Please see the PROJ library's C function
reference for further documentation. You should be able to use those C functions
as if they were Perl.
Geo::LibProj::FFI offers a large portion of the most commonly used PROJ
functions, but more could be added later. If you need a function that isn't yet
available in this module, please open a GitHub issue with a description of your
use case.
