PGPLOT is a Fortran subroutine package for drawing graphs on a variety
of display devices. For more details, see the manual ``PGPLOT Graphics
Subroutine Library'', available from T. J. Pearson.
The CPGPLOT library adds an intermediate level of wrapper functions
between C programs and the PGPLOT library. These functions hide the
system dependencies of calling PGPLOT behind a system independent
interface.
Documentation and demo programs are included.
===> The following configuration options are available for pgplot-5.2.2_30:
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
===> Use 'make config' to modify these settings
graphics/pgplot: fix build on armv7
Same fix as for math/slatec.
Approved by: portmgr (build fix blanket)
MFH: 2025Q3
Event: EuroBSDcon Devsummit 2025
See also: f56f31e07cb64c0b183127733bc6cd6af61efea1
graphics/pgplot: mark broken on armv7
Saves a few minutes of unnecessary compilation.
I tried RELRO_UNSAFE, but the '-Wl,-zrelro' comes from somewhere else
in the build AFAIS.
Reported-by: https://portsfallout.com/fallout?port=graphics%2Fpgplot%24
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
graphics: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Abel Chow <ozsanh45vds001@sneakemail.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Ade Lovett <ade@lovett.com>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Hayward <xelah@xelah.com>
* Alex Ivasyuv <siegerstein@pochta.ru>
* Alex Samorukov <samm@os2.kiev.ua>
(Only the first 15 lines of the commit message are shown above )
graphics/pgplot: Fix duplicate source file
This will result in linker errors once D26044 is commited since
currently duplicates are silently filtered out.
While here, add LICENSE variables.
Submitted by: arichardson
Reviewed by: zeising
Differential Revision: https://reviews.freebsd.org/D26371
Fix build with src r354909 applied.
The referenced change made NO_INSTALLLIB, NO_MAN, and NO_PROFILE into
errors causing these ports that declare them and use the FreeBSD make
infrastructure as part of their build to fail.
When the offending variables occur in a BSD Makefile, NO_MAN becomes
MAN= and NO_INSTALLLIB and NO_PROFILE become MK_INSTALLLIB=no and
MK_PROFILE=no respectively. When declared in the environment they
become WITHOUT_<FOO>.
Add USES=xorg USES=gl, ports categories g
Add USES=xorg and USES=gl to ports in categories starting with 'g'.
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Related to revision 499061 bump ports with USES=fortran to have them
benefit from the improved situation where libgcc_s is only used when
absolutely necessary.
Suggested by: tijl
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Change x11/xorgproto to become a build dep
Change x11/xorgproto to become a build time dependency when added to
USE_XORG. Change the dependency to be on the port, rather than a file the
port installs.
Fix fallout.
Bump portrevision on depending ports.
PR: 230909
Reviewed by: eadler
Approved by: portmgr (antoine)
Obtained
from: https://github.com/FreeBSDDesktop/freebsd-ports/tree/feature/xorgproto
exp-run: antoine
Differential Revision: https://reviews.freebsd.org/D16906
Switch to xorgproto instead of individual packages
Upstream used to distribute protocol headers as separate packages, but has
decided to merge those to a common package, named xorgproto. This update
tracks that change.
* Add a new port, x11/xorgproto, with are protocol headers for xorg.
* Hook the new protocol port to the build and to infrastructure in
bsd.xorg.mk.
* Update all ports with a dependency on any of the old *proto packages to
instead depend on xorgproto. Bump portrevision.
* Delete the old *proto packages, update MOVED.
PR: 230023
Submitted by: zeising
Approved by: portmgr (antoine)
exp-run by: antoine
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms), part II.
The first part covered ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
This adds ports with USES=fortran and ports using Mk/bsd.octave.mk
which in turn has USES=fortran.
PR: 214965
Reported by: thierry
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
Convert all USE_FORTRAN=yes to "USES=fortran, USE_GCC=yes". In most cases
USE_GCC=yes has been omitted though.
Remove USE_FORTRAN handling from bsd.port.mk and bsd.gcc.mk.
Minor cleanups in some ports like USE_GMAKE, NOPORTDOCS,...
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.
This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.
Approved by: portmgr (bapt)
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above )
fix three drivers on 64-bit architectures [1]; correct pkg-descr [1];
allow the demo program that is run during the test target to
be specified
Submitted by: S. Allendorf [1]
Feature safe: yes
remove the custom compiler driver which hasn't been used in nearly 13 years;
merge scripts/configure and files/Makefile into the port Makefile; replace
a construct that has been deprecated in libpng; respect {C,F,LD}FLAGS [1],
NOPORT{DATA,DOCS,EXAMPLES}, etc.; clean up files/Makefile*; add a test target;
adopt
PR: 161239
Feature safe: yes
For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.
- X11BASE clean - properly link libpgplot.so against -lpng (so that each
program which links with libpgplot.so does not have to specify -lpng) - a
bit cleaner (use macros where possible, etc.)
Upgrade to version 5.2.2 (the distfile still has version 5.2) Add a lib depend
on png since this version has a png driver. Fix minors bugs in Makefile.demo
Fix MASSIVE typo INSTALL_SHLIBS --> INSTALLS_SHLIBS, which occured because I
just cun'n'pasted the name from Satoshi's commit message without checking it.
