Patsy is a Python library for describing statistical models (especially linear
models, or models that have a linear component) and building design matrices.
Patsy brings the convenience of R "formulas" to Python.
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py312-patsy listed in the above command, you can pick from the names under the Packages section.
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
math: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Alessando Sagratini <ale_sagra@hotmail.com>
* Alex Dupre <ale@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Amarendra Godbole <amarendra.godbole@gmail.com>
* Anders Nordby <anders@FreeBSD.org>
* Andreas Fehlner (fehlner@gmx.de)
* Andrew L. Neporada <andrew@chg.ru>
* Andrey <gugu@zoo.rambler.ru>
* Andrey Zakhvatov
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
Change all occurrences of xmj@chaot.net to johannes@perceivon.net as the owner
requested.
This only affects "Created by" lines with one exception: devel/uclcmd. There the
maintainer is changed. This was overlooked in r416918.
Approved by: junovitch (mentor)
Change MAINTAINER from xmj@FreeBSD.org to johannes@perceivon.net
PR: 210265
Submitted by: Johannes Jost Meixner (johannes@perceivon.net)
Approved by: pi (mentor)
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
- Remove easy_install dependency
- Bump PORTREVISION to enforce a cleanup for the easy_install references
With hat: python@
Approved by: portmgr (implicit)
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
math/py-patsy: Python package for statistical models and design matrices
Patsy is a Python library for describing statistical models (especially linear
models, or models that have a linear component) and building design matrices.
Patsy brings the convenience of R "formulas" to Python.
WWW: https://www.github.com/pydata/patsy
PR: ports/183870
Submitted by: Johannes Jost Meixner <xmj chaot.net>
