| Port details |
- py-pyhull Computation of convex hull, Delaunay triangulation and Voronoi diagram
- 2015.2.1_2 math
 =0      Version of this port present on the latest quarterly branch. - Maintainer: yuri@FreeBSD.org
- Port Added: 2015-12-25 09:20:44
- Last Update: 2023-01-11 15:58:34
- Commit Hash: 77d6847
- Also Listed In: python
- License: MIT
- Description:
- A Python wrapper to Qhull (www.qhull.org) for the computation
of the convex hull, Delaunay triangulation and Voronoi diagram.
See also: https://github.com/materialsvirtuallab/pyhull
  ¦  ¦  ¦  ¦  - pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}pyhull>0:math/py-pyhull@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/math/py-pyhull/ && make install clean
- To add the package, run one of these commands:
- pkg install math/py-pyhull
- pkg install py39-pyhull
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-pyhull listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-pyhull
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1538017800
SHA256 (pyhull-2015.2.1.tar.gz) = d2ff0aa3298b548287587609a24f4e2aae7f7b8b1df152a90cd313260abc3a24
SIZE (pyhull-2015.2.1.tar.gz) = 318821
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-numpy>=1.16,1<1.24,1 : math/py-numpy@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-numpy>=1.16,1<1.24,1 : math/py-numpy@py39
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- math_py-pyhull
- USES:
- python:3.6+
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
2015.2.1_2
11 Jan 2023 15:58:34
 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
2015.2.1_2
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
2015.2.1_2
20 Jul 2022 14:22:24
|
Tobias C. Berner (tcberner) |
math: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Alessando Sagratini <ale_sagra@hotmail.com>
* Alex Dupre <ale@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Amarendra Godbole <amarendra.godbole@gmail.com>
* Anders Nordby <anders@FreeBSD.org>
* Andreas Fehlner (fehlner@gmx.de)
* Andrew L. Neporada <andrew@chg.ru>
* Andrey <gugu@zoo.rambler.ru>
* Andrey Zakhvatov (Only the first 15 lines of the commit message are shown above ) |
2015.2.1_2
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
2015.2.1_2
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
2015.2.1_2
24 Dec 2020 13:46:02
|
kai |
Relax hardcoded paths to fix build with Python 3.8.7
Since r558913 Python 3.8 incorporates BPO-42604 [1] which changed the
shared libs naming scheme. This means "EXT_SUFFIX" is now derived from
SOABI and yields with Python 3.8 to ".cpython-38.so" instead of ".so".
The affected ports strip the libaries in the "post-install" target via
hardcoded path(s) and the build fails at the end because the new extension
is not expected at this place.
Remedy the issue by adding wildcards to these paths. This should also
prepare the ports for future Python releases, which will use the new shared
libs naming scheme.
[1] https://bugs.python.org/issue42604
PR: 252057
Reported by: John Kennedy
Reviewed by: fluffy, koobs
Approved by: koobs (python) |
2015.2.1_2
26 Jul 2019 20:46:57
|
gerald |
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330 |
2015.2.1_1
12 Dec 2018 01:35:36
|
gerald |
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590 |
2015.2.1
27 Sep 2018 03:13:35
|
yuri |
math/py-pyhull: Update 2015.2.0 -> 2015.2.1
Reported by: portscout |
2015.2.0_1
25 Apr 2018 16:42:38
|
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
2015.2.0_1
10 Mar 2018 17:46:06
|
gerald |
Bump PORTREVISIONs of all users of math/mpc that we just updated to
version 1.1.0 (via revision 464079). |
2015.2.0
25 Feb 2018 00:40:37
|
yuri |
Replaced my old rawbw.com maintainer's address with yuri@FreeBSD.org
98 ports are affected.
Approved by: tcberner (mentor, implicit) |
2015.2.0
17 Jun 2017 10:42:44
|
joneum |
- math/py-pyhull: Update to 2015.2.0
PR: 220018
Submitted by: Yuri Victorovich <yuri at rawbw.com> (maintainer)
Approved by: miwi (mentor)
Differential Revision: https://reviews.freebsd.org/D11229 |
1.5.8
09 Jun 2017 18:44:32
|
sunpoet |
Update to 1.5.8
- While I'm here, add LICENSE_FILE
Changes: https://github.com/materialsvirtuallab/pyhull/blob/master/docs/changelog.rst
PR: 219878
Submitted by: Yuri Victorovich <yuri@rawbw.com> (maintainer) |
1.5.6
25 Dec 2015 09:20:38
|
vanilla |
Add py-pyhull 1.5.6, computation of convex hull, Delaunay triangulation
and Voronoi diagram.
PR: 205593
Submitted by: Yuri Victorovich <yuri@rawbw.com> |
As an Amazon Associate I earn from qualifying purchases.