| Port details |
- py-gguf Read and write ML models in GGUF for GGML
- 0.18.0.8913_1 misc
 =0      0.17.1.7134Version of this port present on the latest quarterly branch. - Maintainer: yuri@FreeBSD.org
- Port Added: 2025-03-10 22:12:07
- Last Update: 2026-05-05 19:29:37
- Commit Hash: 2bf3834
- Also Listed In: python
- License: MIT
- WWW:
- https://ggml.ai
- https://github.com/ggml-org/llama.cpp
- Description:
- gguf is a Python module for reading and writing ML models in GGUF for GGML.
gguf is a spin-off of the llama-cpp project.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- USE_RC_SUBR (Service Scripts)
- no SUBR information found for this port
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}gguf>0:misc/py-gguf@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/misc/py-gguf/ && make install clean
- To add the package, run one of these commands:
- pkg install misc/py-gguf
- pkg install py311-gguf
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py311-gguf listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py311-gguf
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1777011678
SHA256 (ggml-org-llama.cpp-0.18.0.8913-b8913_GH0.tar.gz) = 1b0af2622c78a900e762f3b856edb9263d6a001a4b36351c936aa9e2170cbb0d
SIZE (ggml-org-llama.cpp-0.18.0.8913-b8913_GH0.tar.gz) = 33875494
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py311-poetry-core>=1.0.0 : devel/py-poetry-core@py311
- python3.11 : lang/python311
- py311-build>=0 : devel/py-build@py311
- py311-installer>=0 : devel/py-installer@py311
- Test dependencies:
-
- py311-pytest>=7,1 : devel/py-pytest@py311
- python3.11 : lang/python311
- Runtime dependencies:
-
- py311-numpy>=1.16 : math/py-numpy@py311
- py311-pyyaml>=5.1 : devel/py-pyyaml@py311
- py311-sentencepiece>=0.1.98 : textproc/py-sentencepiece@py311
- py311-tqdm>=4.27 : misc/py-tqdm@py311
- python3.11 : lang/python311
- This port is required by:
- for Run
-
- misc/py-vllm
Configuration Options:- No options to configure
- Options name:
- misc_py-gguf
- USES:
- python shebangfix
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.18.0.8913_1
05 May 2026 19:29:37
 |
Max Brazhnikov (makc) |
*/*: bump PORTREVISION after switching to NumPy 2.x |
0.18.0.8913
05 May 2026 19:29:37
 |
Max Brazhnikov (makc) |
*/*: Switch to NumPy 2.x
PR: 294328
Exp-run: antoine |
0.18.0.8913
24 Apr 2026 08:33:34
|
Yuri Victorovich (yuri) |
misc/py-gguf: 0.18.0.8701 → 0.18.0.8913 |
0.18.0.8701
08 Apr 2026 15:19:17
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.17.1.7134 → 0.18.0.8701 |
0.17.1.7134_1
03 Apr 2026 20:52:43
|
Charlie Li (vishwin) |
python.mk: retire ${PYNUMPY}
With both math/py-numpy (2) and math/py-numpy1, the variable stopped
making sense. Also remove the upper version bound. |
0.17.1.7134_1
03 Apr 2026 18:52:22
|
Charlie Li (vishwin) |
math/py-numpy: switch all consumers to math/py-numpy1
...and bump PORTREVISIONs of consumers with hard RUN_DEPENDS
PR: 281470 |
0.17.1.7134
23 Nov 2025 20:09:00
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.17.1.6191 → 0.17.1.7134 |
0.17.1.6191
18 Aug 2025 08:11:03
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.17.1.6040 → 0.17.1.6191 |
0.17.1.6040
31 Jul 2025 09:00:26
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.17.1.5866 → 0.17.1.6040 |
0.17.1.5895
26 Jul 2025 08:16:11
|
Yuri Victorovich (yuri) |
misc/py-gguf: 0.17.1.5866 → 0.17.1.5895
Reported by: portscout |
0.17.1.5866
10 Jul 2025 22:33:15
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.17.0.${GH_TAGNAME:S/b//} → 0.17.1.5866 |
0.17.0.5671
15 Jun 2025 18:08:43
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.16.3.5401 → 0.17.0.5671 |
0.16.3.5401
16 May 2025 06:30:35
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 5371 → 5401 |
0.16.3.5371
14 May 2025 06:45:26
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.16.2.5287 → 0.16.3.5371
Reported by: portscout |
0.16.2.5287
06 May 2025 06:31:46
|
Yuri Victorovich (yuri) |
misc/py-gguf: 0.16.2.5195 → 0.16.2.5287 |
0.16.2.5195
27 Apr 2025 03:38:21
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 5174 → 5195 |
0.16.2.5174
24 Apr 2025 07:33:43
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.16.2.5162 → 0.16.2.5174 |
0.16.2.5162
21 Apr 2025 01:44:17
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.16.0.5142 → 0.16.2.5162 |
0.16.0.5142
16 Apr 2025 09:41:10
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 5106 → 5142 |
0.16.0.5106
11 Apr 2025 08:17:05
|
Yuri Victorovich (yuri) |
misc/py-gguf: Update 0.16.0.5061 → 0.16.0.5106 |
0.16.0.5061
06 Apr 2025 23:48:05
|
Yuri Victorovich (yuri) |
misc/py-gguf: update 0.16.0 → 0.16.0.5061 |
0.16.0
10 Mar 2025 22:10:42
|
Yuri Victorovich (yuri) |
misc/py-gguf: New port: Read and write ML models in GGUF for GGML |
As an Amazon Associate I earn from qualifying purchases.