*/*: Bump consumers of dns/libidn

Reported by:	vvd

net-im/mcabber: Moved man to share/man

Approved by:    portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

net-im: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  <ports@c0decafe.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Alberto Villa <avilla@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Timoshenko <gonzo@univ.kiev.ua>
  *  Andrew Lewis <freeghb@gmail.com>
  *  Andrey Akhmichin <sepulkarium45@yahoo.com>
  *  Bartek Rutkowski <r@robakdesign.com>
  *  Bernard Spil <brnrd@freebsd.org>
  *  Brendan Molloy <brendan+freebsd@bbqsrc.net>
  *  Denis Shaposhnikov <dsh@vlink.ru>

net-im/mcabber: Update to 1.1.2

net-im/mcabber: Add CPE information

Approved by:    portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

- Update to 1.1.1
- Drop maintainership

net-im: Add missing USES={gnome,xorg}

dns/libidn: Update to 1.35

Bump 48 ports.
Previous update to 1.34 broke jabberd.

PR:		228048

- Update to 1.1.0

- Fix libidn support always disabled

Reported by:	tijl

- Update to 1.0.5
- Tweak depends

Update security/gpgme-* to 1.8.0

In this version, libgpgme-pthread.so has been removed in favor of just
using libgpgme.so as the thread-safe library. PORTREVISION has been
bumped on all ports depending on security/gpgme so that any that may have
linked to -lgpgme-pthread will link to -lgpgme instead.

The Python module provided by security/py-gpgme has been renamed upstream
from pyme3 to gpg. This removes the conflict with security/py-pyme,
although security/py-gpgme is still the direct replacement of that
module.

- Update to 1.0.4

- Update to 1.0.3

- Update to 1.0.2
- Clarify LICENSE
- Switch to USES=localbase

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Explicitly specify version for libotr.so to differentiate security/libotr and
security/libotr3

Approved by:	portmgr blanket

- Take maintainership

Unbreak window resizing.

PR:		189676
Submitted by:	sg2342@googlemail.com

- Update to 1.0.0
- Use pathfix in place of shebangfix
- Strip binaries
- Add EXAMPLES option
- Simplify post-patch and post-install

PR:		201850
Submitted by:	tkato432@yahoo.com

- Add LICENSE_FILE
- Fix shebangs
- Strip libraries
- Pet portlint

MFH:		2015Q2

Reset dhn's ports

PR:		197522
Submitted by:	jbeich
Approved by:	portmgr

Remove dead mirror

security/libgcrypt: 1.6.1 -> 1.6.2, bump depends

Changes:
- src/sexp.c (do_vsexp_sscan): Return error for invalid args.
- cipher/md.c (_gcry_md_info): Fix a segv in case of calling
  with wrong parameters.
- cipher/primegen.c (_gcry_generate_elg_prime): Change to return an
  error code, possible NULL deref in call to prime generator.
- cipher/dsa.c (generate): Take care of new return code.
- cipher/elgamal.c (generate): Change to return an error code.  Take
	care of _gcry_generate_elg_prime return code.
- ecc: Support the non-standard 0x40 compression flag for EdDSA.
- mpi: Extend the internal mpi_get_buffer.
- mpi: Fix regression for powerpc-apple-darwin detection.
- Fix bug inhibiting the use of the sentinel attribute in src/gcrypt.h.in

Cleanup plist

dns/libidn:
- Add USES=libtool and bump dependent ports
- Add INSTALL_TARGET=install-strip
- Always install libidn-components.png because it is used by libidn.info
- Add -lintl to Libs.private instead of Libs in libidn.pc

security/libgcrypt: 1.5.3_3 -> 1.6.1

- Update to 1.6.1
- Remove some unneeded patches
- Fix pkg-plist
- report configure bug upstream
  https://bugs.g10code.com/gnupg/issue1668
- report API breakage downstream and find that MacPorts had the same issue
  https://rt.cpan.org/Ticket/Display.html?id=97201
- bump PORTREVISION for dependent ports (approx. 100 ports)
- Thanks to exp-run by antoine@ to find ports that break
- patch ports that would otherwise break
  security/shishi with PR 192164 is already committed
  [1] devel/ccrtp
  [2] editors/abiword
  [3] security/p5-Crypt-GCrypt

PR:		191256, 192162 [1], 192163 [2], 192166 [3]
Submitted by:	Carlos Jacobo Puga Medina <cjpugmed@gmail.com>
Approved by:	maintainer timeout, antoine (exp-run), portmgr (implicit)

Convert textproc/aspell to "USES=libtool tar:bzip2" and bump dependent ports

Approved by:	portmgr (implicit, PORTREVISION bump on unstaged port)

- Switch security/libotr3 to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

- Convert USE_BZIP2 to USES
- Switch to USES=libtool, drop .la files

Approved by:	portmgr blanket

- Support staging
- Use new LIB_DEPENDS syntax

PR:		187347
Submitted by:	amdmi3
Approved by:	maintainer timeout, portmgr (blanket)

- Update to 0.10.2

- Remove manual creation and removal of share/applications, as it's now in the
mtree (categories starting with [np])

Approved by:	portmgr (bdrewery)

- Update security/gpgme to 1.4.3
- Use USE_GNOME= ltverhack to correct the library version number
  to what the author intended.  This effectively rolls the version
  number backwards, but should prevent future unneccesary version
  bumps.
- Support staging
- Use options helpers
- Use new LIB_DEPENDS syntax
- Bump PORTREVISION on dependent ports

Add NO_STAGE all over the place in preparation for the staging support (cat:
net-im)

Convert USE_NCURSES by USES=ncurses
Convert USE_READLINE by USES=readline

Chase security/libgcrypt update

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	zeising

- Convert USE_GETTEXT to USES (part 4)

Approved by:	portmgr (bapt)

Finish converting the whole ports tree to USES=pkgconfig

Convert dhn's ports to the new options framework
While here trim headers and convert some USE_GNOME=pkgconfig to
USE_PKGCONFIG=build

Approved by:	maintainer (dhn)

Hook security/libotr3 up, and move ports that depend on the old version
to this new dependency.

For ports that depend on security/libotr, add the new USE_PKGCONFIG macro.

For all but kdenetwork4 use =build. For it use both just in case.

For net-im/clim also fix the manual call to pkg-config for CONFIGURE_ENV

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

- Chase gpgme shared lib bump.
- Add an entry to UPDATING

Reviewed by:    tabthorpe

- Chase the libgcrypt shared lib version

Add a new macro to deal with conflict between ncurses from base and ncurses from
ports.
If a ports is linked against ncurses from base or from the ports, it should then
add:
USE_NCURSES=yes

it is also possible to specify the hard dependency on the ports ncurses or one
the base one adding the following macros:
WITH_NCURSES_PORT=yes or WITH_NCURSES_BASE=yes

PR:             ports/155269
Submitted by:   me
Reviwed by:     pav@
Approved by:    portmgr (pav@)
Exp-run by:     portmgr (pav@)

- Fix Modules Path
- Remove MD5 checksum
- Bump PORTREVSION

Reported by:    Benjamin Stier <ben@unpatched.de>
Feature safe:   Yes

- Update to 0.10.1
- Add LICENSE (GPLv2)
- Add ENCHANT support
- Sorts pkg-plist

PR:             ports/152810
Submitted by:   Herbert J. Skuhra <h.skuhra@gmail.com>

Chase security/libgcrypt shlib bump.

PR:             ports/148755
Submitted by:   Hirohisa Yamaguchi <umq@ueo.co.jp>

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

- Update to 0.10.0

- Update to 0.9.10

- Chase security/gpgme update.

Most changes are just PORTREVISION and LIB_DEPENDS fixes. However, the
following ports require a patch to use the new gpgme correctly:
deskutils/kdepim3
deskutils/kdepim3
deskutils/kdepim3
deskutils/kdepim3
deskutils/kdepim4
deskutils/kdepim4
deskutils/kdepimlibs4
deskutils/kdepimlibs4
deskutils/kdepimlibs4
finance/qhacc
mail/mutt-devel
net-im/ayttm
net-im/centericq
net-im/centerim
net-im/centerim-devel
security/openvas-libnasl

These patches were submitted by various people and documented in ports/135911.

PR:             ports/135911

- Use my FreeBSD address on the ports I maintain

Approved by:    tabthorpe (co-mentor)

- Bump PORTREVISION due to share library version bump in security/libgcrypt

PR:              ports/127478

- Update to 0.9.9
- Pass maintainership to submitter

PR:             128161
Submitted by:   Dennis Herrmann <adox@mcx2.org>

- Update to 0.9.8
- Fix otr soversion
- Remove 5.x condition and unneeded patch

Reset infofarmer due to maintainer-timeouts and no response to email.

Hat:    portmgr

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Update to 0.9.7

- Remove USE_GETOPT_LONG which is a no-op since March 2007

- Chase security/libgcrypt shlib version bump

PR:             121591
Submitted by:   miwi
Approved by:    sat

- Update to 0.9.6

- Update to 0.9.5

- Update to 0.9.4

- Optionify gpgme and aspell

Submitted by:   Herbert J. Skuhra <h.skuhra@gmail.com>

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 0.9.3

- Update to 0.9.2
- Respect CFLAGS a bit more

- Don't depend on ncurses from ports when it's available in the
  base system

Submitted by:   rafan

- Update to 0.9.1

- Update to 0.9.0

- Update to 0.8.3

- Update to 0.8.2

- Update to 0.8.1

- Mark broken on <5.3

Reported by:    pointyhat via kris

- Update to 0.8.0
- Complete UTF-8 support
- Work around the no-stream-header bug [1]

PR:             ports/101335 [1]
Submitted by:   thompsa [1]

- Provide additional mirrors where needed
- Convert to "magic" master sites
- Various minor portlint-prodded fixes

- Update to 0.7.8

- Add mirrors
- Take maintainership

Reported by:    pointyhat via kris
Approved by:    krion (mentor, implicit)

- Update to 0.7.6

PR:             95860
Submitted by:   "infofarmer ___ gmail. com" <infofarmer___gmail.com>

Reset vsevolod as maintainer due to unreponsiveness.  We hope to see him
back sometime.

Hat:            portmgr

SHA256ify

Approved by:    krion@

Move instant messaging related ports to newly created net-im category:

  net/aim -> net-im/aim
  net/amsn -> net-im/amsn
  net/ari-yahoo -> net-im/ari-yahoo
  net/ayttm -> net-im/ayttm
  net/bsflite -> net-im/bsflite
  net/ccmsn -> net-im/ccmsn
  net/centericq -> net-im/centericq
  net/cicquin -> net-im/cicquin
  net/coccinella -> net-im/coccinella
  net/convey -> net-im/convey
  net/echat -> net-im/echat
  net/ejabberd -> net-im/ejabberd
  net/firetalk -> net-im/firetalk