check_nwc_health is a plugin for Nagios, Shinken and Icinga, which
is used to monitor network components. It is capable of interrogating
interface statistics, hardware (CPU, memory, fans, power modules,
etc.), firewall policies, HSRP, load balancer pools, processor and
memory usage.
net-mgmt/check_nwc_health: Update to 11.2.4
Changes since 11.0.1.1:
- add mode ha-status for Palo Alto
- add perfdata for the mode interface-nat-rejects
- fix Makefile.am and git add the cisco and arista pm files
- add mode interface-errdisabled (Cisco and Arista only)
- require, not use Net::Ping for F5 checks
- drecksmacoctetbinaerschlonz
(Only the first 15 lines of the commit message are shown above )
net-mgmt/check_nwc_health: Update to 11.0.1.1
Diffs show no changes other than the version climbing from 11.0.1
to 11.0.1.1 five months ago.
Reported by: portscout
net-mgmt/check_nwc_health: Update to 11.0.1
Changes since 10.12.1.2
- typo in --lookup vs. --lookback
- support new C9800 wlan controller
- new structure suitble for epn
- reduce amount of data in cisco fru
- bugfix in traffic thresholds, do not use warning/critical def. thresholds
- implement traffic thresholds for interface-usage, correctly calc the
less-than perfdata thresholds.
(Only the first 15 lines of the commit message are shown above )
net-mgmt/check_nwc_health: Update to 10.12.1
Changes since 10.11.0.2:
- add a cluster-check for cisco sdwan
- reduced runtime and amount of transferred data for bgp-related
checks
Reported by: portscout
net-mgmt/check_nwc_health: Update to 10.9.1.2
Changes since 10.3:
- fix issue #231, thanks log1-c
- fix an uninitialized value in Arista HW check
- improve arista power supply/cord status checks
- add Huawei wlan controller (not finished yet)
- add a temporary check for Cisco Viptela SDWAN (not for public
use yet, sorry)
(Only the first 15 lines of the commit message are shown above )
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
net-mgmt/check_nwc_health: Patch to adjust snmp timeout and retries
.. as described in this github issue:
https://github.com/lausser/check_nwc_health/issues/221
Minor portlint while we're here.
Reported by: Case Larsen
net-mgmt/check_nwc_health: Update to 10.2.1
Changes since 10.1.0.3:
- increase cpu thresholds for linux, separate user/system/etc from
iowait
- update glplugin, better get_table fallback handling
Reported by: portscout
net-mgmt/check_nwc_health: Work around port scout failure
Out of the blue (on 6-Apr-2022) pkg-fallout started objecting to
an awk expression in a support script:
/usr/bin/awk: syntax error in regular expression ^#! ?\/.*\/[a-z]{0,2}awk at
0
source line number 44 source file ./subst
context is
/^#! ?\/.*\/[a-z]{0,2}awk/ {sub(/^#! ?\/.*\/[a-z]{0,2}awk/,"#! >>>
/usr/bin/awk") <<< ;}
*** [check_nwc_health] Error code 2
This only happens with 12.3 and the amd64 and arm64 architectures
and I have never been able to reproduce the error in a poudriere
jail.
Remove the offending expression (which is not used by check_nwc_health).
Reported by: portscout
net-mgmt/check_nwc_health: Update to 10.1.0.2
Changes since 10.1.0.1:
- use JSON::XS in Interface.pm to avoid misleading UNKNOWN error
message
Reported by: portscout
net-mgmt/check_nwc_health: Update to 10.1.0.1
Changes since 10.0.0.2:
- suppress unknown arista sensors which are not marked as faulty
- check filesystems in Arista (full Log/Core stops syslog and
accounting) accept disabled sensors
- bugfix in arista power supply
Reported by: portscout
net-mgmt/check_nwc_health: Update to 10.0.0.1
Changes since 8.0.0.2:
- add Bluecat Address Manager
- bugfix in Bluecat jvm
- check the memory of all members in a cisco stack only if there
are > 1 members
- do not use cpmCPUMemoryHCCommitted, except if you want mem usage
> 100%
- split Bluecat in AddressManager and DnsDhcpServer
(Only the first 15 lines of the commit message are shown above )
net-mgmt/check_nwc_health: Update to 8.0
Changes since 7.12.1.3:
- add some exceptions to hrDeviceDiskStorage and hrDeviceNetwork
- add Vormetric Appliance
- broadcast traffic is now shown as percentage of the overall
traffic (...broadcast_in) and percentage of the available
bandwitdth (..._broadcast_usage_in).
- errors and discards are now calculated as percentage of all
received/sent packets
- TenGig-VRF-MPLS-Dingsbums without errors and discard metrics are
no longer treated as StackSubs
Reported by: portscout
net-mgmt/check_nwc_health: Update to 7.12.1.2. Changes since 7.10.3:
- improve output for connect-vips
- bugfix in UCD-MIB swap
- try to fallback to ucd if neither sysUptime nor sysDescr exist
- add mode watch-vips and connect-vips for F5
- check the number of nodes in a Fortigate cluster
- add bgp4 modes for arista, use 2nd context for cisco bgp4
- check increase of sessions for Cisco
- add AVM 7580
Reported by: portscout
net-mgmt/check_nwc_health: Update to 7.10.3. Changes since 7.10.1.8:
- add mode vpn-sessions (IOS and ASA)
- blacklist nfs-mounts in hrDeviceDiskStorage
- fix HP Aruba checks, add nore from ENTITY-SENSOR-MIB
- fix a bug in interface-etherstats for OLD-CISCO-INTERFACES-MIB
Reported by: portscout
net-mgmt/check_nwc_health: Update to 7.10.1.8. Changes since 7.10.1.5:
- fix a bug in Cisco memory, for Cisco emulation mode of Bel VPN Gate
- fix redundant argument in sprintf
- fix operstatus in linuxlocal
- fix a bug in verbose mode if --nosensors is used
Reported by: portscout
Approved by: matthew (mentor, implicit)
net-mgmt/check_nwc_health: Update to 7.10.1.5. Changes since 7.10.1.1:
- update GLPlugin, reduce default maxrepetitions to 20
- reduce maxrepetitions for f5 sysCpuTable and ifTables
- add --nosensors which skips endless entSensor[Threshold]Table
for Nexuses
- fix a division by 0 for cisco reserved memory
Reported by: portscout
Approved by: matthew (mentor, implicit)
net-mgmt/check_nwc_health: Update to 7.10.0.5:
- fix EIGRP filtering
- fix a bug in fortigate ha-role
- fix a bug in interface-uptime
- fix a bug in interface-uptime
- fix a bug in mode ha-role for Fortigate
- fix a bug in bgp/route modes for the non-standalone version
(InetAddressMaker)
Approved by: ler (mentor, implicit)
net-mgmt/check_nwc_health: Use PERL instead of PERL5 for shebang
as suggested by mat@
Reported by: mat
Approved by: ler (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D20489
net-mgmt/check_nwc_health: Update to 7.8. From the ChangeLog:
- GLPLugin with better ip4/ip6 handling
- fix huawei subclasses
- interfaces --name filter expression can contain _adminup_ as a
secondary filter
- route modes can handle v6
- use OSPFV3-MIB, support v6
- add CISCO-BGP4-MIB, support v6
Reported by: portscout
Approved by: matthew (mentor, implicit)