Junos PyEZ is a Python library to remotely manage/automate Junos
devices.
Junos PyEZ is designed to provide the same capabilities as a user
would have on the Junos CLI, but in an environment built for
automation tasks. These capabilities include, but are not limited to:
- Remote connectivity and management of Junos devices via NETCONF
- Provide "facts" about the device such as software-version, serial-number, etc
- Retrieve "operational" or "run-state" information as Tables/Views
- Retrieve configuration information as Tables/Views
- Make configuration changes in unstructured and structured ways
- Provide common utilities for tasks such as secure copy of files and software
updates
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py311-junos-eznc listed in the above command, you can pick from the names under the Packages section.
*/*: switch dependency from devel/py-lxml5 to devel/py-lxml
Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml (now at version 6.0.1)
To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.
Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.
PR: 289491
Approved by: Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
crees, madpilot, delphij, marcus, nivit, kai,
skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
0mp, Eric Camachat <eric@camachat.org>
*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)
This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.
It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.
This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.
Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>
PR: 287144, 288047
Reported by: makc (via ports-committers),
vvd (PR 288047),
diizzy (PR 287144)
Approved by: portmgr (chase dependency change, unbreak build)
Fixes: 230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)
python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal
Any missed ports, feel free to bump.
Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.
net-mgmt/py-junos-eznc: Update to 2.7.0
* There is already version 2.7.1, which was deliberately not chosen
because it pulls in a custom patched module of py-paramiko 3.4.0
during build/installation.
Changelog since 2.6.4:
https://github.com/Juniper/py-junos-eznc/blob/2.7.0/RELEASE-NOTES.md
PR: 278679
Approved by: maintainer timeout (3+ weeks)
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Move comms/py-serial to comms/py-pyserial
- While I'm here, add NO_ARCH
- Bump PORTREVISION of dependent ports for dependency change
(devel/py-pyvisa-py and finance/odoo will be bumped in next commit, py-pyusb
renaming)
PR: 246546
Submitted by: sunpoet (myself)
Approved by: maintainer (timeout, 40 days)
net-mgmt/py-junos-eznc: Upgrade from 2.2.0 to 2.2.1
Changelog:
- Handle multiple package-result values from sw.install #864
- Extended support to WR-Based Linux H/W #882 #883 #889
- Fixed issues in Console over SSH #877
- Optimized PyEZ docker image size and minor bug fixes #894 #911
- Fixed JSON serialization for Junos facts #902
- Updated securityzone.yml. Added item zone-security #909
- Fixed runtime error while using Outbound-SSH #915
- Fixed Pyyaml bugs #914 #917 #918
Changelog taken from:
https://github.com/Juniper/py-junos-eznc/releases/tag/2.2.1
Also add a newline before NO_ARCH in order to pet portlint
PR: 237502
Submitted by: Sergey Akhmatov <sergey@akhmatov.ru> (maintainer)
Approved by: Sergey Akhmatov (maintainer)
