mldonkey A OCAML client for multiple peer-to-peer networks

2.5.30.17_1 net =29 Version of this port present on the latest quarterly branch.

BROKEN: Does not build
IGNORE: "is marked as broken: Does not build"

Maintainer: holger@e-gitt.net

Port Added: 2002-09-20 16:49:29

Last Update: 2006-01-30 21:36:28

SVN Revision: unknown

License: not specified in port

Description:

mldonkey is a OCAML/GTK client for a number of peer-to-peer networks. It is separated into a core with telnet and web interfaces, and a GTK GUI. The following protocols are supported: - eDonkey (http://www.edonkey2000.com/) - Overnet (http://www.overnet.com/) - Bittorrent (http://bitconjurer.org/BitTorrent/) - Gnutella (http://www.gnutella.org/) - Gnutella2 (http://www.shareaza.com/) - Soulseek (http://www.slsk.org/) - Direct-Connect (http://www.neo-modus.com/) - Opennap (http://opennap.sourceforge.net/) WWW: http://www.nongnu.org/mldonkey/

SVNWeb : Homepage

There is no configure plist information for this port.

Dependency lines:

• mldonkey>0:net/mldonkey

No installation instructions: this port has been deleted.

The package name of this deleted port was: mldonkey

PKGNAME: mldonkey

Flavors: there is no flavor information for this port.

distinfo:

There is no distinfo for this port.

Dependencies

NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.

Build dependencies:

1. ocamlc : lang/ocaml
2. lablgtk : x11-toolkits/ocaml-lablgtk
3. jabbr.cma : net-im/ocaml-jabbr
4. gmake : devel/gmake
5. autoconf259 : devel/autoconf259
6. pkg-config : devel/pkgconfig

Runtime dependencies:

1. rc.subr : sysutils/rc_subr
2. pkg-config : devel/pkgconfig

Library dependencies:

1. iconv.3 : converters/libiconv
2. glib12.3 : devel/glib12
3. gtk12.2 : x11-toolkits/gtk12

There are no ports dependent upon this port

Configuration Options

No options to configure

Master Sites:

1. ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/
2. http://download.savannah.nongnu.org/releases/mldonkey/

Populate newly create net-p2p category with these ports:

  ftp/jigdo
  net/amule1
  net/amule2
  net/apollon
  net/azureus
  net/bnbt
  net/btpeer
  net/btqueue
  net/cdonkey
  net/ctorrent
  net/dcd
  net/dclib
  net/dctc

BROKEN: Does not build

- Update graphics/libglut to 6.4.1.
- Shared lib version and PORTREVISION bumb for all affected ports.

While I'm here:
- Remove USE_MESA knob where it was (35 ports).
  It marked as depricated for 2 years.

PR:             ports/90247
Submitted by:   Ermal Lu?i <eri--@albabsd.org>

Mass-conversion to the USE_AUTOTOOLS New World Order.  The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.

Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.

Preliminary documentation can be found at:
        http://people.FreeBSD.org/~ade/autotools.txt

which is in the process of being SGMLized before introduction into the
Porters Handbook.

Light blue touch-paper.  Run.

Move instant messaging related ports to newly created net-im category:

  net/gaim -> net-im/gaim
  net/gaim-latex -> net-im/gaim-latex
  net/gaim-openq -> net-im/gaim-openq
  net/gaim-rss-reader -> net-im/gaim-rss-reader
  net/gicq -> net-im/gicq
  net/gnomeicu2 -> net-im/gnomeicu2
  net/gossip -> net-im/gossip
  net/ickle -> net-im/ickle
  net/jabber -> net-im/jabber
  net/jabber-aim -> net-im/jabber-aim
  net/jabber-conference -> net-im/jabber-conference
  net/jabber-jud -> net-im/jabber-jud
  net/jabber-msn -> net-im/jabber-msn

Fix rcNG launcher: the latest version (2.5.30.7) no longer supports the
'-daemon' argument

Approved by:    maintainer timeout (2 weeks)

- fix dependency
- fix openssl patch

maintainer emailed: 2005-10-08 (no feedback)
Approved by:    (maintainer timeout)

- Update to 2.5.30.17
- Use external OpenSSL

PR:             ports/86477
Submitted by:   Holger Lamm <holger@e-gitt.net> (maintainer)

Fix USE_RC_SUBR not being defined properly when WITHOUT_GUI is defined, thus
breaking the resulting rcNG script. This can be the case when installing
net/mldonkey-core.

Approved by:    portmgr (clement)

- Fix mldonkey-core build

Pointy hat to:  pav

- Update to 2.5.28.1
- Add rc script [1]

PR:             ports/82467
Submitted by:   Jose M Rodriguez <josemi@freebsd.jazztel.es>
Approved by:    Holger Lamm <holger@e-gitt.net> (maintainer)

                [1]
Submitted by:   hq via maintainer

o After repo copy from net/mldonkey
        - Update to development version 2.5.28 patch kit j
        - Set myself as maintainer for the time being but allow
          previous maintainer to take over ASAP
        - Temporarily --disable-filetp per default since filetp is
          known to be broken on version 2.5.28* and prior
        - Deploy PORTDOCS
        - Add CONFLICTS on net/mldonkey{,-core,-gui}
        - NO_LATEST_LINK since this is a development version of
          net/mldonkey
        - DESCR: replace spaces with tabs

PR:             75664
Repo copied by: marcus (portmgr)

o Add CONFLICTS on upcoming net/mldonkey{,-core,-gui}-devel repocopied
  from matching net/mldonkey{,-core,-gui} ports

PR:             75664
Repo copied by: marcus (portmgr)

- Update WWW

PR:             ports/73924
Submitted by:   Jorge Mario G. Mazo <jgutie11@eafit.edu.co>
Approved by:    Holger Lamm <holger@e-gitt.net> (maintainer)

- autoconf is needed every time, not only in GUI build

Reported by:    pointyhat via kris

- Update to 2.5.23 and unbreak

PR:             ports/70906
Submitted by:   Holger Lamm <holger@e-gitt.net> (maintainer)
Approved by:    portmgr (marcus)

BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

- Update to 2.5.21

PR:             ports/66554
Submitted by:   dhchen <dhchen@dhchen.com>
Approved by:    maintainer

- Update to 2.5.16

PR:             ports/64957
Submitted by:   Holger Lamm <holger@e-gitt.net> (maintainer)

fix for master/slave port

Update to 2.5.14

PR:             63318
Submitted by:   maintainer

use CATEGORIES+= for slave port

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 1)

- Fix build with ocaml-3.07_1

PR:             ports/61012
Submitted by:   Holger Lamm <holger@e-gitt.net> (maintainer)

- Update to version 2.5.4

PR:             58697
Submitted by:   maintainer

Chase up new MASTER_SITE_SAVANNAH.

PR:             ports/56970
Submitted by:   Jean-Yves Lefort <jylefort@brutele.be>

Prepare it to be a master port: make COMMENT optional so that it
can be redefined by slave ports

o Update to 2.5.3
o This port now builds from source and enables all protocols available
  on the distribution
o Update PKGMESSAGE, COMMENT and DESCR accordingly

Submitted by:   maintainer

Update to 2.04 rc1

Submitted by:   maintainer

De-pkg-comment.

Only depend on compat4x port IF running on OSVERSION >= 500000

o Install port's supplied version of kill_mldonkey instead of
  distribution's one
o Bump PORTREVISION

Submitted by:   maintainer
Pointy hat to:  lioux

Fix typo: set WRKSRC correctly

Submitted by:   maintainer

o After being repo copied to mldonkey-gui port:
- update to 2.02.0
- only install the mldonkey core (leave the GUI for the mldonkey-gui
  port)
- update all informational files to reflect this change
- roll our own BSD license kill_mldonkey shell script instead of
  using the distribution's one: sh(1) based using fetch(1)

Approved by:    portmgr (myself & no objections)
Repo copied by: joe
Submitted by:   maintainer

Update MASTER_SITES: DISTFILES no longer available at older ones

Submitted by:   maintainer

New port mldonkey version 1.16: A OCAML/GTK client for the eDonkey
peer-to-peer network

Submitted by:   Holger Lamm <holger@e-gitt.net>

13 vulnerabilities affecting 78 ports have been reported in the past 14 days

^* - modified, not new

All vulnerabilities

Last updated:
2019-12-04 20:33:18