| Port details |
- py-pyshark Pyhon packet parsing using wireshark dissectors
- 0.6_1 net
 =3      0.6_1Version of this port present on the latest quarterly branch. - Maintainer: sunpoet@FreeBSD.org
- Port Added: 2016-06-17 19:10:43
- Last Update: 2024-05-13 14:04:47
- Commit Hash: 53dad96
- People watching this port, also watch:: nagios-check_hdd_health, nuitka-py311, monit, py39-beautifulsoup, openmdns
- Also Listed In: python
- License: MIT
- WWW:
- https://github.com/KimiNewt/pyshark
- Description:
- pyshark is a Python wrapper for tshark, allowing python packet parsing using
wireshark dissectors.
There are quite a few python packet parsing modules, this one is different
because it doesn't actually parse any packets, it simply uses tshark's
(wireshark command-line utility) ability to export XMLs to use its parsing. This
package allows parsing from a capture file or a live capture, using all
wireshark dissectors you have installed.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}pyshark>0:net/py-pyshark@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/net/py-pyshark/ && make install clean
- To add the package, run one of these commands:
- pkg install net/py-pyshark
- pkg install py39-pyshark
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-pyshark listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-pyshark
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1684104512
SHA256 (pyshark-0.6.tar.gz) = a424d83e0ca6224a96bbe30cd3f89d5491654d783faaaf90adaf45867a0bcb17
SIZE (pyshark-0.6.tar.gz) = 27053
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=0 : devel/py-setuptools@py39
- py39-wheel>=0 : devel/py-wheel@py39
- python3.9 : lang/python39
- py39-build>=0 : devel/py-build@py39
- py39-installer>=0 : devel/py-installer@py39
- Test dependencies:
-
- py39-mock>=0 : devel/py-mock@py39
- py39-pytest>=0 : devel/py-pytest@py39
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-appdirs>=0 : devel/py-appdirs@py39
- py39-lxml>=0 : devel/py-lxml@py39
- py39-packaging>=0 : devel/py-packaging@py39
- py39-termcolor>=0 : devel/py-termcolor@py39
- tshark : net/wireshark@nox11
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- net_py-pyshark
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.6_1
13 May 2024 14:04:47
 |
Po-Chuan Hsieh (sunpoet) |
net/py-pyshark: Convert to USE_PYTHON=pep517
- Bump PORTREVISION for package change |
0.6
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.6
27 May 2023 04:09:41
|
Po-Chuan Hsieh (sunpoet) |
net/py-pyshark: Update to 0.6
Changes: https://github.com/KimiNewt/pyshark/releases |
0.5.3_2
04 Mar 2023 13:31:38
|
Joe Marcus Clarke (marcus) |
MOVED: Use the nox11 flavor for tshark and friends
This includes net/py-pyshark, net/termshark, and the samba ports for
testing.
Reported by: mat |
0.5.3_1
03 Mar 2023 20:59:25
|
Joe Marcus Clarke (marcus) |
net/py-pyshark: Chase tshark dependency
Reported by: cperciva |
0.5.3
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.5.3
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.5.3
27 Aug 2022 10:24:50
|
Po-Chuan Hsieh (sunpoet) |
net/py-pyshark: Update to 0.5.3
Changes: https://github.com/KimiNewt/pyshark/releases |
0.4.6
20 Jul 2022 14:22:37
|
Tobias C. Berner (tcberner) |
net: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Straup Cope <ascope@cpan.org>
* Aaron Zauner <az_mail@gmx.at>
* Adam Jette <jettea46@yahoo.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Alex Bakhtin <Alex.Bakhtin@gmail.com>
* Alex Deiter <Alex.Deiter@Gmail.COM>
* Alex Dupre <ale@FreeBSD.org>
* Alex Dupre <sysadmin@alexdupre.com> (Only the first 15 lines of the commit message are shown above ) |
0.4.6
09 Jun 2022 23:16:11
|
Po-Chuan Hsieh (sunpoet) |
net/py-pyshark: Update to 0.4.6
Changes: https://github.com/KimiNewt/pyshark/releases |
0.4.5
28 Jan 2022 23:26:48
|
Po-Chuan Hsieh (sunpoet) |
net/py-pyshark: Update to 0.4.5
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.3
02 May 2021 19:45:24
|
Po-Chuan Hsieh (sunpoet) |
net/py-pyshark: Convert REINPLACE_CMD to patch file |
0.4.3
01 May 2021 22:19:19
|
Po-Chuan Hsieh (sunpoet) |
net/py-pyshark: Update to 0.4.3
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.2.11
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.4.2.11
15 Nov 2020 18:05:39
 |
sunpoet |
Update to 0.4.2.11
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.2.9
12 Aug 2019 19:40:16
|
sunpoet |
Update to 0.4.2.9
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.2.8
10 Aug 2019 22:48:49
|
sunpoet |
Update to 0.4.2.8
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.2.7
09 Aug 2019 20:01:16
|
sunpoet |
Update to 0.4.2.7
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.2.6
09 Aug 2019 11:45:36
|
sunpoet |
Update to 0.4.2.6
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.2.5
07 Aug 2019 16:43:02
|
sunpoet |
Update to 0.4.2.5
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.2.4
08 Jul 2019 18:48:30
|
sunpoet |
Update to 0.4.2.4
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.4.2.3
12 May 2019 20:10:25
|
sunpoet |
Update to 0.4.2.3
Changes: https://github.com/KimiNewt/pyshark/releases |
0.4.2.2
18 Apr 2019 18:00:42
|
sunpoet |
Update to 0.4.2.2
- Add TEST_DEPENDS
- Add NO_ARCH
- Update pkg-descr
- Update WWW
- Take maintainership
Changes: https://github.com/KimiNewt/pyshark/releases
https://github.com/KimiNewt/pyshark/commits/master |
0.3.6.2
02 Oct 2018 19:06:16
|
feld |
Reset maintainer on my python ports |
0.3.6.2
20 Jun 2018 17:05:44
|
mat |
Use PY_FLAVOR for dependencies.
FLAVOR is the current port's flavor, it should not be used outside of
this scope.
Sponsored by: Absolight |
0.3.6.2
25 Apr 2018 16:42:38
|
amdmi3 |
Switch all pypi.python.org WWWs to a new PyPi home pypi.org where
they now redirect to anyway. All new urls checked to return 200,
I've fixed a couple of them in the process.
Approved by: portmgr blanket, mat |
0.3.6.2
30 Nov 2017 15:50:34
 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
0.3.6.2
05 Feb 2017 21:19:34
|
feld |
net/py-pyshark: Update to 0.3.6.2 |
0.3.6.1
17 Jun 2016 19:14:46
|
feld |
net/py-pyshark: Add LICENSE
Move RUN_DEPENDS to please portlint |
0.3.6.1
17 Jun 2016 19:10:36
|
feld |
Python wrapper for tshark, allowing python packet parsing using
wireshark dissectors.
WWW: https://pypi.python.org/pypi/pyshark |
As an Amazon Associate I earn from qualifying purchases.