print/ghostscript9-base: Remove expired port:

2023-03-31 print/ghostscript9-base: Released over 10 years ago and unsupported
by upstream, consider print/ghostscript9-agpl-base

print/ghostscript9-base: Deprecate and set expiration date to 2023-03-31

Released over 10 years ago and unsupported by upstream, point users to
print/ghostscript9-agpl-base
Set same expiration date as print/ghostscript9-x11 as it doesn't make
sense to just keep one port.

PR:		269350
Reported by:	Michael Osipov <michael.osipov@siemens.com>

Remove WWW lines that have been moved into Makefiles

Approved by:	portmgr (implicit)

Move more WWW entries from pkg-descr files into Makefiles

The WWW: lines in the pkg-descr files of these ports where not at the
end of those files and have been missed in prior conversion runs.

Approved by:	portmgr (implicit)

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

print/ghostscript*: Return Ghostscript ports to the pool

Approved by:	 doceng (with hat)

*/*: Remove redundant '-[0-9]*' from CONFLICTS_INSTALL

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

print/ghostscript9-base: Add CPE information

Approved by:    portmgr (blanket)

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

print/ghostscript9-base: prepare for freetype2 update

- Backport of the same patch applied to print/ghostscript9-agpl-base

PR:		250375
Obtained from:	https://www.openwall.com/lists/oss-security/2020/10/20/7
MFH:		2020Q4
Security:	CVE-2020-15999

Convert to UCL & cleanup pkg-message (categories [p-r])

dns/libidn: Update to 1.35

Bump 48 ports.
Previous update to 1.34 broke jabberd.

PR:		228048

For ports under `print' category: remove redundant PKGMESSAGE assignment,
which is set appropriately by the b.p.m when `pkg-message' appears on the
SUB_FILES list.

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

Rename all files containing a : in their filename.

While there, run make makepatch on affected ports, and rename patches
accordingly.

Sponsored by:	Absolight

Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed

Approved by:	portmgr blanket

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
  supported by libgnutls-dane and gnutls-cli.  Also clarify the option
  description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4.  Some ports used this library
  in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed.  Ports that used these have been
  updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.

net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.

www/hydra: Mark BROKEN.  This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.

PR:		207768
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3.  Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.

Long description:

First some background.  When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain.  Costs used to be configured in such a way that files were
first converted to PostScript.  This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers.  Nowadays most filters

print/ghostscript9-base: Modify patch to handle dragonfly as well

A port patch excludes <malloc.h> for FreeBSD, and DragonFly needs this
treatment as well, so the existing patch was trivially modified.

Approved by:	DF blanket (non-invasive)

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be