print/gutenprint: update to 5.3.4

Release Notes (kind of):
  https://sourceforge.net/projects/gimp-print/files/gutenprint-5.3/5.3.4/NEWS

accessibility/at-spi2-core: update to 2.46.0

What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
  interface.

What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
  events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).

What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

*: Clean up some things

- Fix typos
- Fix overwritten variables with focus on master/slave ports
- Remove unreferenced variables
- Sort categories
- Remove redundant option descriptions
- Clean up commented PORTREVISION
- Add missing USES

Reported by:	portscan

Remove # $FreeBSD$ from Makefiles.

x11/babl: Update to 0.1.82

PR:		250895
Submitted by:	Neel Chauhan <neel@neelc.org>

update gutenprint to 5.3.3

This is a new major release with new and updated printer drivers and a
all-new native PCL backend (for some Laser Printers), and support for a
lot of laser printers.

While here, do some polishing and update my email address.

print/gutenprint: update to 5.2.12

https://sourceforge.net/projects/gimp-print/files/gutenprint-5.2/5.2.12/

The -ijs and -foomatic backends have been removed by upstream,
leaving -cups as the sole choice of backend. Therefore, the -base
and -cups ports have been merged into the main gutenprint port
and the obsolete components have been removed.

PR:		217118
Submitted by:	bsam, tijl
Reported by:	tijl

- Make GTK2 support optional
- Fix module directory handling
- Strip libraries
- Minor fixes

PR:		196321, 200017, 202324
Submitted by:	mazhe@alkumuna.eu, yuri@rawbw.com, amdmi3@FreeBSD.org,
cmt@burggraben.net (maintainer)
Approved by:	cmt@burggraben.net (maintainer)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Upgrade OpenEXR and ilmbase to 2.2.0.

GCC 4.2 in FreeBSD 8.X/9.X base is now too old to compile OpenEXR, so
GCC-based systems will upgrade to the default ports compiler (GCC 4.7
currently.)

Add two patches to OpenEXR to permit building it in a live system with
the older OpenEXR version installed. Bug report filed to upstream Github
at https://github.com/openexr/openexr/issues/130

Couple OpenEXR more tightly to ilmbase and require its exact .so
version.

Add UPDATING note, and bump PORTREVISION of all dependent ports.

Proto-STAGE hugin-devel, and mark it IGNORE because hugin is newer.

Approved by:	portmgr (implicit for bumping PORTREVISION on unstaged ports)

- Update from 5.2.8 to 5.2.10
- Add stage support
- Convert USE_BZIP2 and USE_GNOME=gnomehack to USES

PR:		ports/191209
Submitted by:	cmt@burggraben.net

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- add license

PR:     ports/170004
Submitted by:   maintainer, cmt@burggraben.net

- print/gutenprint-cups build prompts unprivileged user [1]
- Upgrade related porrs to 5.2.8 [2]
- Convert to OptionsNG [2]
- Add GPL license information [2]
- pet portlint (minor re-arrancement of COMMENT/LICENSE to shut portlint up)

PR:             ports/169026 [1]
Submitted by:   dougb@ [1]
Submitted by:   Christoph Moench-Tegeder <cmt@burggraben.net> (maintainer) [2]

- Unbreak and update to version 5.2.7
- Assign maintainership to submitter

PR:             ports/161680
Submitted by:   Christoph Moench-Tegeder <cmt@burggraben.net>

Reset ahze@ due to maintainer-timeouts and no response to email.

Hat:            portmgr

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Update to 5.2.4

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 5.1.6

Fix INDEX

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

Revert changes to plist, they are only applicable to gimp 2.4+ according to
configure script

Reported by:    pav

Update plist with last gutenprint update

Reported by:    pointyhat via pav

Update to 5.1.3

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Update ${.CURDIR}/pkg-plist

- Don't set an empty PLIST= and PLIST_FILES will work

Reported by:    marcus

- Switch from using PLIST_FILES to pkg-plist because of an unknown bug that
  hangs on install.

PR:             111258
Reported by:    Denis Eremenko <moonshade@pnhz.kz>

Add gimp-gutenprint (gutenprint-base slave port)
 * gimp-print plugin for the GIMP