print/typetools: Moved man to share/man

print/typetools: Update version 2.108=>2.110

Changelog: https://github.com/kohler/lcdf-typetools/releases/tag/v2.110

Mk/**tex.mk: Convert bsd.tex.mk to USES=tex

- Update all the consumers to use USES=tex
- USE_TEX=yes is the old way of writing USES=tex which has been removed
  and replaced in all ports
- Almost all of the USE_TEX features remains unchanged
- Some consumers had the same variables defined both in the mk
  infrastructure and also in the ports which have been removed from the
  ports as those are redundant.

In case any of the consumers are failing to build please make sure that
the nexessary USES=tex is there. Unlike previous USE_TEX=yes will no
longer load the required VARS for tex and related dependencies.

Reviewed by:	portmgr
Approved by:	portmgr (blanket)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

print: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan Eldridge <alane@geeksrus.net>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alex Dupre <sysadmin@alexdupre.com>
  *  Alexander Vereeken <Alexander88207@protonmail.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Anish Mistry <amistry@am-productions.biz>

*/*: Remove redundant '-[0-9]*' from CONFLICTS_INSTALL

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Approved by: portmgr (blanket)

Remove # $FreeBSD$ from Makefiles.

print/typetools: Update version 2.107=>2.108

print/typetools: Update version 2.106=>2.107

Relnotes:	https://github.com/kohler/lcdf-typetools/releases/tag/v2.107

print/typetools: Update version 2.105=>2.106

print/typetools: Update version 2.104=>2.105

- Take MAINTAINERSHIP
- Convert patch files to be 'make makesum' compatible

Cleanup plist

- Update to 2.104
- Add conflict with texlive-base

PR:		192214
Submitted by:	Ports Fury

print/typetools: update to 2.101

PR:		191280
Submitted by:	Carlos Jacobo Puga Medina

Update to 2.100

PR:		ports/185702
Submitted by:	KATO Tsuguru

- Update to 2.99
- Stage support
- Fix build with clang

PR:		ports/181893
Submitted by:	KATO Tsuguru

Add NO_STAGE all over the place in preparation for the staging support (cat:
print)

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

Rectify USE_TEX to support both of teTeX and TeXLive.

TEX_DEFAULT:
	A knob to choose teTeX or TeXLive.  One can specify in /etc/make.conf.

USE_TEX:
	A knob for port developers.  Valid keywords are listed in
	bsd.tex.mk.

Remove *_DEPENDS from ports which depend on teTeX and add USE_TEX=tetex
instead to make migration to TeXLive easier.

- Update to 2.98

PR:		178026
Submitted by:	Ports Fury

- Force commit to correct the entry:
- Update to 2.97

PR:		176530
Submitted by:	Ports fury

- Update to 1.3.0

PR:		176538
Submitted by:	Ports Fury

- Convert Header
- Reset maintainership

- update png to 1.5.10

- Update to 2.92

- Update to 2.91

- Update to 2.88

- Update to 2.87

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Update to 2.82

- Update to 2.80

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

- Update to 2.79

- Update to 2.78

 - Update to 2.76

- Mark MAKE_JOBS_SAFE for SMP compilation

- Update to 2.75

- Update to 2.74

- Update to 2.72
- Take maintainership

Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.

To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.

To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.

Changes to Mk/*:
 - Add runtime detection magic in bsd.port.mk

- Update to 2.71

PR:             126601
Submitted by:   Ports Fury

- Update to 2.70

PR:             126429
Submitted by:   Ports Fury

- Update to 2.69

PR:             123505
Submitted by:   Ports Fury

- Update to 2.66

PR:             119168
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

- Update to 2.64

PR:             ports/114415
Submitted by:   KATO Tsuguru <tkato432 at yahoo.com>

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- Update to 2.60

PR:             109806
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

- Update to 2.49

- Update to 2.48
- Drop maintainership

PR:             ports/107769
Submitted by:   miwi
Approved by:    Ulrich Spoerlein <uspoerlein@gmail.com> (old maintainer)

- Update maintainer's email address

PR:             ports/98102
Submitted by:   Ulrich Spoerlein <uspoerlein@gmail.com> (maintainer)

print/lcdf-typetools was a dupe of print/typetools, so remove the former
port and add a MOVED entry for it.

Since print/typetools was unmaintained, transfer maintainership to
submitter of print/lcdf-typetools (Ulrich Spoerlein <q@galgenberg.net>)

Reported by:    Ports Fury

Update to 2.36

PR:             ports/89017
Submitted by:   Ports Fury

Upgrade to 2.35
Noticed by: new ports version checker.

- Update to 2.34

PR:             ports/82279
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

. Update to 2.30.

PR:             81127
Submitted by:   Ports Fury

Update to version 2.28

PR:             ports/80544
Submitted by:   Ports Fury

- Update to 2.26.

PR:             ports/79976
Submitted by:   Ports Fury

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Update to 2.22

PR:             78503
Submitted by:   Ports Fury

Update to version 2.16

PR:             ports/75115
Submitted by:   Ports Fury

- Update to 2.15

PR:             ports/73474
Submitted by:   KATO Tsuguru <tkato432@yahoo.com>

Fix build with gcc-3.4

PR:             ports/70872
Submitted by:   Ports Fury

- Update to version 1.97

PR:             ports/62821
Submitted by:   Ports Fury

BROKEN on 5.x: Configure fails

SIZEify.

add typetools 1.80
Tools for manipulating fonts