The sigrok project aims at creating a portable, cross-platform,
Free/Libre/Open-Source signal analysis software suite that supports
various device types, such as logic analyzers, MSOs, oscilloscopes,
multimeters, LCR meters, sound level meters, thermometers, hygrometers,
anemometers, light meters, DAQs, dataloggers, function generators,
spectrum analyzers, power supplies, GPIB interfaces, and more.
===> The following configuration options are available for sigrok-firmware-fx2lafw-0.1.7:
DOCS=on: Build and/or install documentation
===> Use 'make config' to modify these settings
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
science: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Andreas Fehlner <fehlner@gmx.de>
* Brad Huntting <huntting@glarp.com>
* Chao Shin <quakelee@cn.FreeBSD.org>
* Cheng-Lung Sung <clsung@FreeBSD.org>
* Chia-Hsing Yu <me@davidyu.org>
* Chris Rees <utisoft@gmail.com>
* David Naylor <dbn@FreeBSD.org>
* Dmitry Sivachenko <demon@FreeBSD.org>
* Ed Schouten <ed@FreeBSD.org>
* Eric Freeman <freebsdports@chillibear.com>
* Erik B Knudsen
(Only the first 15 lines of the commit message are shown above )
science/sigrok-firmware-fx2lafw: Update to version 0.1.7
* Add firmware for the YiXingDianZi MDSO (VID/PID: 1D50:608E).
* Sainsmart DDS120: Fix the 1kHz reference signal.
* Hantek 6022BL: Fix the voltage range selection (bug #1360).
* Allow LA captures at 48MHz samplerate (as long as bus conditions permit).
* Updated build requirement: sdcc >= 3.4.0 (bug #1326).
* Fix a build issue with sdcc >= 3.9.0 (bug #1404).
* Bump the firmware version (major.minor) to 1.4. This version is
backwards-compatible and doesn't require host-side (libsigrok) changes.
science/sigrok-firmware-fx2lafw: Update to version 0.1.6.
Changes: 0.1.6 (2018-01-26)
---------------------------
* Fix an issue with FX2 based logic analyzers that could cause non-working
and/or prematurely aborted acquisitions (bug #655).
* FX2 based logic analyzers will now toggle pin PA1 during acquisition,
and keep it high while idle. On fx2grok-tiny and fx2grok-flat devices
there's a LED connected to PA1. Thus, those devices will visually indicate
whether a firmware has been uploaded (LED will light up and stay like that
while the device is idle). During any acquisition the LED will blink.
* Refactor the oscilloscope code to avoid duplication (bug #984).
* Fix a 'make distclean' error.
* Fix a compiler warning with recent sdcc versions (e.g. v3.6.9).
Add new port: science/sigrok-firmware-fx2lafw
PR: 188809
Submitted by: uffer
===============================================================
The sigrok project aims at creating a portable, cross-platform,
Free/Libre/Open-Source signal analysis software suite that supports
various device types, such as logic analyzers, MSOs, oscilloscopes,
multimeters, LCR meters, sound level meters, thermometers, hygrometers,
anemometers, light meters, DAQs, dataloggers, function generators,
spectrum analyzers, power supplies, GPIB interfaces, and more.
