Network automation to screen-scraping devices is primarily concerned with
gathering output from show commands and with making configuration changes.
Netmiko aims to accomplish both of these operations and to do it across
a very broad set of platforms. It seeks to do this while abstracting away
low-level state control (i.e. eliminate low-level regex pattern matching
to the extent practical).
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py311-netmiko listed in the above command, you can pick from the names under the Packages section.
security/py-netmiko: Update to 4.6.0
* Adjust USES=python accordingly, because Python 3.8 is no longer
present in the ports tree after ca15850a2b13 while I'm here.
Changelog:
https://github.com/ktbyers/netmiko/releases/tag/v4.6.0
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
Move comms/py-serial to comms/py-pyserial
- While I'm here, add NO_ARCH
- Bump PORTREVISION of dependent ports for dependency change
(devel/py-pyvisa-py and finance/odoo will be bumped in next commit, py-pyusb
renaming)
PR: 246546
Submitted by: sunpoet (myself)
Approved by: maintainer (timeout, 40 days)
security/py-netmiko: Update to 3.3.1
Changelog:
New Drivers/Platforms
* UnifiSwitchSSH
* Huawei OLT
* Huawei SmartAX
Bugfixes and Improvements:
* Nokia SR-OS SCP Support
* Improve terminal width behavior
* Fix some issues related to cmd_verify
* Expanded autodetect support
https://github.com/ktbyers/netmiko/releases/tag/v3.1.1
MFH: 2020Q2
security/py-netmiko: Update to 3.0.0
Changelog:
Key enhancements/changes:
* PY3.6+ support only (all support for PY27 removed)
* Significant reliability improvements to reduce loss of session state
problems
* Add support for direct use of TextFSM template
* Allow custom socket timeout in SCP file_transfer
* Improve MD5 hashing mechanism in SCP checks
* Add sock parameter support
* Increase default banner_timeout to 15
(Only the first 15 lines of the commit message are shown above )
security/py-netmiko: Update to 2.4.2
Changelog:
* Add Keymile driver
* Fix session_log corruption bug
* Add support for ProxyJump in SSH config file
* Add support for Linux prompt terminators via environment variables
Note: Barring critical bugs this should be the last Netmiko release that
will support Python 2.
https://github.com/ktbyers/netmiko/releases/tag/v2.4.2
security/py-netmiko: Update to 2.4.0
Changelog:
Support for new platforms:
* VERSA Networks FlexVNF
* Mikrotik
* CloudGenix ION
* MRV LX
* Endace
* Huawei telnet support
* IOS-XR telnet support
Enhancements:
(Only the first 15 lines of the commit message are shown above )
security/py-netmiko: Update to 2.3.3
Changelog:
* Use Python Black
* Add OneAccess OneOS support
* Start building a wheel as part of release process
* Bugfixes
* Use environment markers for Poetry support
https://github.com/ktbyers/netmiko/releases/tag/v2.3.3
Approved by: mentors (implicit)
security/py-netmiko: Update to 2.3.0
* Pacify portlint [1]
* Switch to GitHub to enable test target [2]
Notable changes since 2.1.1:
* Add support for new platforms:
- Apresia Systems AEOS
- Citrix Netscaler
- Dell EMC Isilon, Dell OS10 and DNOS6
- IP Infusion OcNOS
- RAD ETX
* Add fast_cli mode to improve performance
* Add support for a session_log
(Only the first 15 lines of the commit message are shown above )
Change my maintainer email address to my new one at the FreeBSD project.
Reviewed by: miwi (mentor)
Approved by: miwi (mentor)
Differential Revision: https://reviews.freebsd.org/D19050
New port: security/py-netmiko: Multi-vendor library to simplify SSH connections
to network devices
PR: 227088
Submitted by: Kai <freebsd_ports@k-worx.org>
