Seahorse is a Gnome front end for GnuPG - the Gnu Privacy Guard program.
It is a tool for secure communications and data storage.
Data encryption and digital signature creation can easily
be performed through a GUI and Key Management operations
can easily be carried out through an intuitive interface.
===> The following configuration options are available for seahorse-47.0.1:
AVAHI=on: DNS-SD key sharing
LDAP=on: LDAP keyserver support (for gpg)
===> Use 'make config' to modify these settings
security/gpgme: Update to 2.0.0
Upstream has split most of the bindings out into separate projects with
this release, so the child ports that were previously providing various
bindings are now autonomous and have new origins. The python bindings
should have been called py-gpg for many years now, since 'gpg' is the
actual module name, so this also corrects that issue.
security/gpgme-cpp -> security/gpgmepp
security/gpgme-qt -> security/qgpgme
security/py-gpgme -> security/py-gpg
gpgmepp and qgpgme have been converted to CMake. py-gpg is now a "fun"
autotools and FreeBSD ports system hybrid. Gpgme, itself, still uses
autotools, but with much less parenting (patching) to do for its
emancipated children.
Adjust several ports to fix API incompatibility with upstream patches
and with some of my own. Adjust all consumers to use the new port
origins of the former child ports.
https://dev.gnupg.org/T7673
Mk/bsd.sites.mk: Simplify MASTER_SITES= GNOME
Since GNOME changes their numbering, in some Makefile MASTER_SITES= GNOME is
more complex. This patch simplify for users.
Differential Revision: https://reviews.freebsd.org/D43183
security/gcr: Update to 4.3.0
Move the previous version to security/gcr3 and switch consumer ports to it
PR: 282046
Approved by: vishwin
Sponsored by: Future Crew, LLC
all: drop support for expired FreeBSD 14.0
Simplify expressions for FreeBSD 13.X
Reviewed by: many
Differential Revision: https://reviews.freebsd.org/D46601
*/*: Fix build with llvm16 on 13.2-STABLE
As like as HEAD(14.0-RELEASE) llvm16 was merged in base for 13.2-STABLE
with the OSVERSION 1302507.
- Utilize USE_CXXSTD=c++14 or similar solution where applicable
- Update conditionals to addtionally check for OSVERSION greater than
1302507 and less than 1400000
Approved by: portmgr (blanket)
Sponsored by: The FreeBSD Foundation
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
(Only the first 15 lines of the commit message are shown above )
Mk/**ldap.mk: Convert USE_LDAP to USES=ldap
Convert the USE_LDAP=yes to USES=ldap and adds the following features:
- Adds the argument USES=ldap:server to add openldap2{4|5|6}-server as
RUN_DEPENDS
- Adds the argument USES=ldap<version> and replaces WANT_OPENLDAP_VER
- Adds OPENLDAP versions in bsd.default-versions.mk
- Adds USE_OPENLDAP/WANT_OPENLDAP_VER in Mk/bsd.sanity.mk
- Changes consumers to use the features
Reviewed by: delphij
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D38233
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
security: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Dupre <ale@FreeBSD.org>
* Alex Kapranoff <kappa@rambler-co.ru>
* Alex Samorukov <samm@freebsd.org>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kriventsov <avk@vl.ru>
* Alexander Leidinger <netchild@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
net/openldap24-client: bump all dependent port
In the earlier net/openldap24-server commit, only those which depend on
net/openldap24-sasl-client were bumped. Bumping all dependent port that
didn't get a bump to force a rebuild of these packages.
Suggested by: kib
Fix the conditional added in r554175
This should have been caught by my poudriere testruns. Sorry for the
breakage.
PR: 249974
Approved by: portmgr blanket
MFH: 2020Q4
Use -fuse-lld=lld to avoid link errors using old ld(1) on 11.x
PR: 249974
Submitted by: John Hein <jcfyecrayz__liamekaens_com>
Approved by: portmgr blanket
MFH: 2020Q4
Add USES=xorg USES=gl, ports categories s
Add USES=xorg and USES=gl to ports in categories starting with 's'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.
The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/
Thanks to Antoine Brodin for running the exp-runs.
PR: 229761
Update security/gpgme-* to 1.8.0
In this version, libgpgme-pthread.so has been removed in favor of just
using libgpgme.so as the thread-safe library. PORTREVISION has been
bumped on all ports depending on security/gpgme so that any that may have
linked to -lgpgme-pthread will link to -lgpgme instead.
The Python module provided by security/py-gpgme has been renamed upstream
from pyme3 to gpg. This removes the conflict with security/py-pyme,
although security/py-gpgme is still the direct replacement of that
module.
The FreeBSD GNOME team proudly presents GNOME 3.18 for FreeBSD.
The offical GNOME 3.18 release notes can be found at
https://help.gnome.org/misc/release-notes/3.18/
This update doesn't contain the glib/gtk c++ bindings which will
be done in a another update due to the requirement on c++11 and the
amount of fallout this probably will give.
GDM is still at version 3.16 due to some issues.
Bump mate-themes to use the gtk 3.18 version of the themes.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 207006
The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.
The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/
Upgrade instructions for port users:
Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 201980
Update the Gnome stack to the latest in the 3.14 series.
Thanks to Gustau Perez <gustau.perez@gmail.com> for helping to keep thes
ports updated.
Obtained from: GNOME dev repo
Switch back to gnupg 2.1.
Turns out that other dependancies also pull in the new gnupg so we end up
with a conflict. But this allows the port to build.
The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.
This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.
Apart from updating ports to newer versions
GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.
Shell Extensions can be installed via https://extensions.gnome.org/ , we have
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION on more ports that depend on libgcrypt after the update
in r363436 and remove the UPDATING entry because it did not guarantee
that all ports were updated nor that they were updated in the right order.
Also remove libgcrypt.la again.
PR: 192342
Approved by: portmgr (implicit, bump unstaged ports)
net/openldap24-*:
- Convert to USES=libtool and bump dependent ports
- Avoid USE_AUTOTOOLS
- Don't use PTHREAD_LIBS
- Use MAKE_CMD
databases/glom:
- Drop :keepla
- Add INSTALL_TARGET=install-strip
databases/libgda4* databases/libgda5*:
- Convert to USES=libtool and bump dependent ports
- USES=tar:xz
- Use INSTALL_TARGET=install-strip
- Use @sample
(Only the first 15 lines of the commit message are shown above )
- Update security/gpgme to 1.4.3
- Use USE_GNOME= ltverhack to correct the library version number
to what the author intended. This effectively rolls the version
number backwards, but should prevent future unneccesary version
bumps.
- Support staging
- Use options helpers
- Use new LIB_DEPENDS syntax
- Bump PORTREVISION on dependent ports
Convert almost all gnome@ ports to OptionsNG, trim header, use USES=pathfix
instead of gnomehack and pet portlint.
Add conflicts with future gnome3 versions.
Reviewed by: miwi, bapt
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
Presenting GNOME 2.32.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.32/
This will be the last release of the GNOME 2.x series, mainly a bugfix and
bridge release to the first release of the GNOME 3.x series.
This release features commits by avl, marcus, mezz and myself.
The FreeBSD GNOME Team would like to thank the following contributors and
testers for there help with this release:
Zane C.B. <vvelox@vvelox.net>
romain@
Olaf Seibert <O.Seibert@cs.ru.nl>
DomiX
(Only the first 15 lines of the commit message are shown above )
Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .
This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.
Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.
Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.
(Only the first 15 lines of the commit message are shown above )
Presenting GNOME 2.28.1 for FreeBSD. The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.
On the FreeBSD front, though, a lot went into this release. Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration. Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.
But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.
(Only the first 15 lines of the commit message are shown above )
- Chase security/gpgme update.
Most changes are just PORTREVISION and LIB_DEPENDS fixes. However, the
following ports require a patch to use the new gpgme correctly:
deskutils/kdepim3
deskutils/kdepim3
deskutils/kdepim3
deskutils/kdepim3
deskutils/kdepim4
deskutils/kdepim4
deskutils/kdepimlibs4
deskutils/kdepimlibs4
deskutils/kdepimlibs4
finance/qhacc
mail/mutt-devel
net-im/ayttm
net-im/centericq
net-im/centerim
net-im/centerim-devel
security/openvas-libnasl
These patches were submitted by various people and documented in ports/135911.
PR: ports/135911
Presenting GNOME 2.26 for FreeBSD. See
http://library.gnome.org/misc/release-notes/2.26/ for a list of what's new.
On the FreeBSD front, we introduced a port of libxul 1.9 as an alternative
for Firefox 2.0 as a Gecko provider. Almost all of the Gecko consumers
can make use of this provider by setting:
WITH_GECKO=libxul
The GNOME 2.26 port was done by ahze, kwm, marcus, and mezz with
contributions by Joseph S. Atkinson, Peter Wemm, Eric L. Chen,
Martin Matuska, Craig Butler, and Pawel Worach.
Presenting GNOME 2.24 for FreeBSD.
See http://library.gnome.org/misc/release-notes/2.24/ for the general
release notes. On the FreeBSD front, this release introduces Fuse support
in HAL, adds multi-CPU support to libgtop, WebKit updates, and fixes some
long-standing seahorse and gnome-keyring bugs. The documentation updates
to the website are forthcoming.
This release features commits by adamw, ahze, kwm, mezz, and myself. It would
not have been possible without are contributors and testers:
Alexander Loginov
Craig Butler [1]
Dmitry Marakasov [6]
Eric L. Chen
(Only the first 15 lines of the commit message are shown above )
- Separate OpenLDAP related code into bsd.ldap.mk
- Change default OpenLDAP version to 2.4
- Remove OpenLDAP 2.2 support, the port has been gone for some time now
- Add -DDEPRECATED to CFLAGS for all OpenLDAP using ports
PR: ports/123602, ports/124115, ports/125605
Submitted by: delphij, Jens Rehsack <rehsack@web.de>,
Yuri Pankov <yuri.pankov@gmail.com>
- Remove USE_GTK, it's no longer used
PR: ports/123528
Submitted by: mezz
- Use PATCH_WRKSRC instead of WRKSRC in do-patch target
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
In 2.22, it requires gnome-keyring and no longer provide optional now. Fix
the gnome-keyring dependency and bump the PORTREVISION.
Reported by: Dino Vliet <dino_vliet@yahoo.com>
Add some improved logic to seahorse to have it gracefully fall back to insecure
memory usage for sensitive storage when gnome-keyring doesn't have the
privileges
to use mlock(2)/munlock(2). This behavior is much more useful than the
ungraceful
dereference of a NULL pointer (and subsequent crash of the seahorse programs)
that
currently is employed.
This patch makes seahorse (and seahorse-agent, seahorse-daemon, etc.) warn the
user
about having to use secure memory so that consumers such as Evolution and other
software can make use of seahorse.
A larger and more valuable project would be to provide some sort of unprivileged
user mlock(2) support in the base system. Some ideas are currently being
discussed.
Reviewed by: marcus, gnome@, imp
Approved by: marcus (gnome)
The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD. The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ . On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media. Work
is also underway to tie webkit more closely into GNOME. As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.
This release would not have been possible without the contributions and
testing efforts of the following people:
Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
(Only the first 15 lines of the commit message are shown above )
* Improve COMMENT to more properly reflect what seahorse has become
* Fix a crash that occurs with newer OpenLDAP versions
PR: 115160
Submitted by: Yuri Pankov <yuri@darklight.org.ru>
Presenting GNOME 2.18 for FreeBSD. GNOME 2.18 is a departure from recent GNOME
releases in that it focuses more on stability and functionality than on
new features. Not that it doesn't have its share of new and exciting
items. See http://www.gnome.org/start/2.18/ for all the goodies in
this release.
GNOME 2.18 for FreeBSD would not have been possible without the hard work
of the FreeBSD GNOME Team and our intrepid band of testers including
J. W. Ballantine, Pawel Worach, Yasuda Keisuke, Pascal Hofstee, miwi,
Yoshihiro Ota, Vladimir Grebenschikov, Jukka A. Ukkonen,
Phillip Neumann, Franz Klammer, and Neal Delmonico.
- Since security/gnupg (2.x) installs symlink $PREFIX/bin/gpg,
depending on $PREFIX/bin/gpg for security/gnupg1 (1.4.x) is not
correct. To work around this, change dependency line from bin/gpg
to bin/gpgv which exists in security/gnupg1 port only.
Spotted by: ume
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
Presenting GNOME 2.14.1 for FreeBSD! Checkout
http://www.gnome.org/start/2.14/ for the official release notes, and a list
of all the gooides in this new release. In particular, GNOME 2.14 focused
on performance, and they did not miss the mark. There's some new eye candy,
but most of the big things are waiting until GNOME 2.16. On the FreeBSD
side, we tried to clean up all the crashers we could. In particular, we
really improved GNOME's 64-bit support.
The good news is that this release does not bring any big shared library
version bumps, so you can almost do a simple portupgrade to get to 2.14.
There are a few minor gotchas that will be documented in UPDATING shortly.
The FreeBSD GNOME Team would like th thank the following users for their
patches, feedback, and sometimes incessant complaing about crashes (you
know who you are).
(Only the first 15 lines of the commit message are shown above )
