===> The following configuration options are available for cinnamon-control-center-6.4.2:
COLORD=on: Color management via colord
WACOM=on: Wacom management panel support
===> Use 'make config' to modify these settings
gnome.mk: rename gdkpixbuf2 to gdkpixbuf to prepare for port move
The GTK 1-based gdk-pixbuf has not existed for some time.
No functional or package changes.
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
(Only the first 15 lines of the commit message are shown above )
x11/cinnamon: update to 5.4
Components:
- lang/cjs to 5.4.1
- misc/cinnamon-translations to 5.4.2
- sysutils/cinnamon-control-center to 5.4.6
- sysutils/cinnamon-settings-daemon to 5.4.4
- x11-fm/nemo to 5.4.2
- x11-wm/muffin to 5.4.5
- x11/cinnamon-desktop to 5.4.2
- x11/cinnamon-menus to 5.4.0
- x11/cinnamon-screensaver to 5.4.2
- x11/cinnamon-session to 5.4.0
- x11/cinnamon to 5.4.9
- x11/py-python-xapp to 2.2.2
- x11/xapp to 2.2.14
5.6 is the latest upstream release; this is a stopgap to reduce
delta.
Reviewed by: tcberner (desktop)
Differential Revision: https://reviews.freebsd.org/D37917
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
sysutils: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <jsmith@resonatingmedia.com>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Landwehr <aaron@snaphat.com>
* Adam Weinberger <adamw@FreeBSD.org>
* Adrian Chadd
* Adrian Chadd <adrian@FreeBSD.org>
* Akinori MUSHA aka knu <knu@idaemons.org>
* Alan Eldridge <alane@FreeBSD.org>
* Alan Eldridge <alane@geeksrus.net>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Deiter <alex.deiter@gmail.com>
(Only the first 15 lines of the commit message are shown above )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
Upgrade the Cinnamon desktop environment to version 4.8
This version uses Python 3 instead of the expired Python 2.7
From the main PR (249856):
" There are a couple known issues:
* x11-fm/nemo crashes upon closing a window or tab.
* x11/cinnamon-screensaver unlocking doesn't work, most likely due to a
missing PAM (Linux-PAM?) integration.
Both of these issues are being worked on.
I've been dogfooding since Cinnamon 4.0, and apart from those issues,
everything works."
PR: 249771
PR: 249851
PR: 249855
PR: 249856
PR: 249857
PR: 249858
Submitted by: Charlie Li
Remove most expired ports that depend on Python 2.7:
Exceptions are:
- mail/mailman, our listservers still use it
- www/chromium, solely because of popular demand,
upstream is (slowly) working on porting it to Python 3
- ports that have actual patches for Python 3 against
them (Cinnamon and a few unrelated other ports)
- llvm70 and qt5-webengine because they seem to have a lot
of dependencies which need further analysis
- sysutils/uefi-edk2-bhyve because bhyve seems to use them
- python2 and python27 themselves
I'm sure there will be complaints, but the nice thing about
a version control system is that we can revert and adjust things.
(Only the first 15 lines of the commit message are shown above )
Multiple ports: improve regex compliance
These changes largely fall into just two categories:
1. Need textproc/gsed for GNU extensions
2. Extraneous escapes that can go away
For #1, there's a further subdivision into those that require autoconf magic
and those that can get away with BINARY_ALIAS=sed=${LOCALBASE}/bin/gsed.
-CURRENT will soon gain GNU extensions, but these will take longer to get to
all supported releases; we must switch them to gsed to ensure we're actually
properly building them as intended.
For #2, I've fixed these as I can and we should upstream these fixes.
(Only the first 15 lines of the commit message are shown above )
Add USES=xorg USES=gl, ports categories s
Add USES=xorg and USES=gl to ports in categories starting with 's'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Remove esound support from pulseaudio as audio/esound expired.
Bump PORTREVISIONs of dependent ports.
Build-tested in poudriere on a head-amd64 jail for audio/pulseaudio*
The updated libgtop included in the GNOME 3.28 update broke runtime for
mate ports that use libgtop [1]. Bump all users not included in the GNOME
update to fix these issues.
Reported by: Barbara Guida <barbara.freebsd@gmail.com> [1]
Use USES=pathfix where applicable.
PR: 213195
Submitted by: mat
Exp-run by: antoine
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D8093
Combine print/cups-base, print/cups-client and print/cups-image into
print/cups and update it to 2.1.3. Also remove print/cups-pstoraster,
improve print/cups-filters, print/foomatic-* and update print/hplip to
3.16.2.
Long description:
First some background. When you hand a file to cups it sets up a chain of
filter programs that converts the file to something a printer understands.
Each filter has a cost associated with it and cups tries to find the
cheapest chain. Costs used to be configured in such a way that files were
first converted to PostScript. This could then be manipulated further (e.g.
putting multiple pages on one sheet) before finally being sent to a
PostScript printer or another filter like pstoraster which produces a raster
format understood by non-PostScript printer drivers. Nowadays most filters
(Only the first 15 lines of the commit message are shown above )
Cherrypick a couple of unreleased timezone .png files from upstream for
the new North Korea timezone. This unbreaks the build on machines that
have an updated TZ database for this new timezone.
Reviewed by: mat
The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.
The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/
Upgrade instructions for port users:
Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 201980
By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do. On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).
Bump PORTREVISION on all ports where the build log contains -export-symbols.
audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions. Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to. Fix a number of other issues in the same
(Only the first 15 lines of the commit message are shown above )
Update cinnamon to 2.4, this should fix [1] and [2].
Update totem to 3.14 now that we have gstreamer 1.4 and minor gnome updates.
Update evolution suite to 3.12.9.
Make sure gtk30 pulls in adwait-icon-theme, since it now the default theme [3].
PR: 195290 [1], 195289 [2], 195455 [3]
Obtained from: gnome devel repo
The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.
This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.
Apart from updating ports to newer versions
GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.
Shell Extensions can be installed via https://extensions.gnome.org/ , we have
(Only the first 15 lines of the commit message are shown above )
