Cinnamon is a Linux desktop which provides advanced innovative features and a
traditional user experience.
The desktop layout is similar to Gnome 2.
The underlying technology is forked from Gnome Shell.
The emphasis is put on making users feel at home and providing them with an
easy to use and comfortable desktop experience.
===> The following configuration options are available for cinnamon-6.4.13_1:
DOCS=on: Build and/or install documentation
NLS=on: Native Language Support
RECORDER=on: Build the recorder into source
WAYLAND=off: Wayland (graphics) support
====> Fallback panel: you have to select exactly one of them
MATE=on: MATE Panel
GNOME=off: GNOME Panel
TINT=off: Tint
===> Use 'make config' to modify these settings
x11/cinnamon: optionalise fallback panel
When Cinnamon fails to start, the fallback is x11-wm/metacity +
panel, similar to MATE or GNOME Flashback. In control structure
order, x11/mate-panel, x11/gnome-panel and x11/tint are probed for
the presence, so expose these as OPTIONS and set x11/mate-panel as
default.
While here, restore the old BUILD_DEPENDS line for <EGL/eglmesaext.h>.
*/*: switch dependency from devel/py-lxml5 to devel/py-lxml
Currently, there are two versions of python XML processing library
which conflict each other in the ports tree, namely:
- devel/py-lxml5 (now at version 5.4.0)
- devel/py-lxml (now at version 6.0.1)
To avoid the situation that some ports depend on py-lxml5 and some
others do on py-lxml (by switching dependencies individually), this
commit switches the dependencies from py-lxml5 to py-lxml at once.
Additional note: There are still two ports (textproc/py-rdflib and
www/py-draftjs-exporter) depending on py-lxml5 since they limit upper
version to less than 6.
PR: 289491
Approved by: Michiel van Baak Jansen <michiel@vanbaak.eu>, arrowd,
crees, madpilot, delphij, marcus, nivit, kai,
skreuzer, fluffy, bofh, thierry, stephen, sunpoet,
0mp, Eric Camachat <eric@camachat.org>
*/*: update dependency on devel/py-lxml to devel/py-lxml5 (2nd attempt)
This is a follow up to the commit 230fb2661c78, which updated some
ports' dependencies on devel/py-lxml to devel/py-lxml5. It was an
attempt to follow the dependency change of
www/py-beautifulsoup. However, the switch was incomplete and broke
some other ports.
It has turned out that the ports depending on devel/py-lxml (at
version 4.9.3) does not limit their dependencies' upper bound to 4.x
except for one (devel/py-pymaven-patch). So updating them to
devel/py-lxml5 (at version 5.4.0) should cause no harm.
This commit switch dependencies of all the ports (except
devel/py-pymaven-patch) to devel/py-lxml5 avoid potential conflicts.
Co-authored-by: Daniel Engberg <diizzy@FreeBSD.org>
PR: 287144, 288047
Reported by: makc (via ports-committers),
vvd (PR 288047),
diizzy (PR 287144)
Approved by: portmgr (chase dependency change, unbreak build)
Fixes: 230fb2661c78 (*/*: update dependency on devel/py-lxml to devel/py-lxml5)
x11/cinnamon: fix screen recording function
Screen recording relies on gstreamer's vpx in particular.
If it's missing the error like this appear in ~/.xsession-errors
> ** (cinnamon:71729): WARNING **: 21:12:21.414: CinnamonRecorder: failed to
parse pipeline: no element "vp8enc"
So add vpx plugin as a dependency to make it work.
PR: 288249
gnome.mk: rename gdkpixbuf2 to gdkpixbuf to prepare for port move
The GTK 1-based gdk-pixbuf has not existed for some time.
No functional or package changes.
x11/cinnamon: partially revert "Disable DOCS option"
Instead of commenting out the option, exclude it instead, as it is
to be exposed again upon future updates given that libxml2 doesn't
error out. Also remove OPTIONS_DEFAULT as DOCS and NLS are globally
enabled by default.
This partially reverts commit 3bbf0bae390af1df9a353b235b390d1f979065ef.
accessibility/at-spi2-core: update to 2.46.0
What's new in at-spi2-core 2.46.0:
* Fix GetInterfaces documentation on org.a11y.atspi.Accessible
interface.
What's new in at-spi2-core 2.45.91:
* Send device event controller events using the same signature as other
events.
* Document the Accessible, Action, and Cache dbus interfaces.
* Fix license of atspi-gmain.c (#87).
What's new in at-spi2-core 2.45.90:
* xml: Add some documentation.
* xml: Fix event arguments.
(Only the first 15 lines of the commit message are shown above )
x11/cinnamon: update to 5.4
Components:
- lang/cjs to 5.4.1
- misc/cinnamon-translations to 5.4.2
- sysutils/cinnamon-control-center to 5.4.6
- sysutils/cinnamon-settings-daemon to 5.4.4
- x11-fm/nemo to 5.4.2
- x11-wm/muffin to 5.4.5
- x11/cinnamon-desktop to 5.4.2
- x11/cinnamon-menus to 5.4.0
- x11/cinnamon-screensaver to 5.4.2
- x11/cinnamon-session to 5.4.0
- x11/cinnamon to 5.4.9
- x11/py-python-xapp to 2.2.2
- x11/xapp to 2.2.14
5.6 is the latest upstream release; this is a stopgap to reduce
delta.
Reviewed by: tcberner (desktop)
Differential Revision: https://reviews.freebsd.org/D37917
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
x11: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Adam Weinberger <adam@vectors.cx>
* Adam Weinberger <adamw@FreeBSD.org>
* Alex Dupre <ale@FreeBSD.org>
* Alexander Matey <matey@cis.ohio-state.edu>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey Dokuchaev <danfe@regency.nsu.ru>
* Alexey Mikhailov <karma@ez.pereslavl.ru>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anton Berezin <tobez@FreeBSD.org>
* Anton Toernqvist <antont@inbox.lv>
(Only the first 15 lines of the commit message are shown above )
framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree
Differential Revision: https://reviews.freebsd.org/D35097
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
devel/meson: update to 0.61.1
- Revert some 0.60.2 fixes incompatible with 0.61.0
- Drop rpath workaround for JHBuild as it's non-trivial to rebase
Changes: https://mesonbuild.com/Release-notes-for-0-61-0.html
PR: 260943
Reported by: GitHub (watch releases)
Approved by: tcberner
Exp-run by: antoine
x11/cinnamon: unbreak build with Meson 0.61.0
docs/reference/cinnamon-js/meson.build:11:6: ERROR: gnome.gtkdoc keyword
argument 'dependencies' was of type array[CustomTarget] but should have been
array[Dependency | SharedLibrary | StaticLibrary]
PR: 260943
Reported by: antoine (via exp-run)
Regressed by: https://github.com/mesonbuild/meson/commit/566c2c9a9c98
x11/cinnamon: unbreak build with Meson 0.60.2
src/st/meson.build:204:0: ERROR: "install_dir" must be specified when installing
a target
PR: 260056
Reported by: antoine (via exp-run)
Regressed by: https://github.com/mesonbuild/meson/commit/5cc166a667ff
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
x11/cinnamon: Attempt to fix build order bug (D29353)
Uncovered while building with devel/samurai but can probably also
happen with ninja eventually.
In file included from ../src/main.c:25:
In file included from ../src/cinnamon-global-private.h:28:
In file included from src/st/st.h:7:
../src/st/st-box-layout-child.h:24:10: fatal error: 'st-enum-types.h' file not
found
#include "st-enum-types.h"
^~~~~~~~~~~~~~~~~
1 error generated.
samu: subcommands failed
http://package18.nyi.freebsd.org/data/122amd64-default-foo/2021-04-05_21h03m50s/logs/errors/cinnamon-4.8.6.log
PR: 254678
textproc/gtk-doc: update to 1.33.1
- Switch to meson build (thanks to daniel engberg)
- Patch affected ports
PR: 252701
Exp-run by: antoine
MFH: 2021Q1
Upgrade the Cinnamon desktop environment to version 4.8
This version uses Python 3 instead of the expired Python 2.7
From the main PR (249856):
" There are a couple known issues:
* x11-fm/nemo crashes upon closing a window or tab.
* x11/cinnamon-screensaver unlocking doesn't work, most likely due to a
missing PAM (Linux-PAM?) integration.
Both of these issues are being worked on.
I've been dogfooding since Cinnamon 4.0, and apart from those issues,
everything works."
PR: 249771
PR: 249851
PR: 249855
PR: 249856
PR: 249857
PR: 249858
Submitted by: Charlie Li
First batch at upgrading gnome to 3.36/3.38
Update evolution-dataserver to 3.38.0 and because of ABI breakage update ports
depending on it
Update bijiben to 3.38.0
Update gnome-calendar to 3.38.0
Update gnome-contacts to 3.38
Update gnome-maps to 3.38.0
Patch gnome-todo to work with newer evolution-dataserver (patched obtained from
OpenBSD/Archlinux)
Update evolution to 3.38.0
Update evolution-ews to 3.38.0 (among changes it brings support for office365)
Update folks to 0.14.0
Update cheese to 3.38.0
(Only the first 15 lines of the commit message are shown above )
x11/cinnamon: move deprecation back
- an upgrade of the cinnamon ports is in the works, but not quite there yet.
- let's give it some more time
- the updated version will no longer require python2
graphics/py-pillow: Update to 7.0.0
* Repo-Copy the Pillow 6.2.2 release to graphics/py-pillow6 to retain
backwards compatibility for Python 2 consumers as the Pillow 7.0.0 release
dropped the support for Python 2.
* Apply conditional statements to use either Pillow 7.x or Pillow 6.x for
consumers that can be built for Python 2 or newer.
* Exceptions are ports that can be built only for either Python 2 or
Python 3. For the first case, consumers are just assigned to the
repo-copied graphics/py-pillow6.
* Also remove Pillow from BUILD_DEPENDS of math/py-PyWavelets as it is not
listed in setup.py as a build dependency [1] and relax the version
(Only the first 15 lines of the commit message are shown above )
Add USES=xorg USES=gl, ports categories x
Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
x11/cinnamon: Remove unnecessary version check
Bug 237426 updates Pillow to 6.0.0, which removed the Image.VERSION
variable, after a period of deprecation.
Cinnamon currently uses this variable, so backport upstream commit
c843f3664064742e2672e0fea528571a882d84ad [1] to compensate, so we don't
need to wait for the Gnome teams Cinnamon 4 update, which has already
pulled it in. Thanks to Charli Li for pointing this commit out.
While I'm here, fix all stage-qa errors and ports/framework compliance
issues:
- Add missing LIB_DEPENDS
- Add missing USE_{GNOME,X11} components
(Only the first 15 lines of the commit message are shown above )
Remove esound support from pulseaudio as audio/esound expired.
Bump PORTREVISIONs of dependent ports.
Build-tested in poudriere on a head-amd64 jail for audio/pulseaudio*
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
The FreeBSD GNOME team proudly presents GNOME 3.28 for FreeBSD.
The offical GNOME 3.28 release notes can be found at
https://help.gnome.org/misc/release-notes/3.28/
Thanks to Antoine Brodin for running the exp-runs.
PR: 229761
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Update automake to 1.16.1. Also remove automake-wrapper. We haven't had
multiple versions of automake in years and probably won't in the future.
PR: 228809
Exp-run by: antoine
Approved by: portmgr (antoine)
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Fix the build fix. Copy paste fat finger, the copy buffer contained the
incorrect
version of the fix. And I didn't check the paste.
Reported by: Thomas Gellekum <thomas.gellekum@netaachen.de>
Bump PORTREVISIONs for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.9.4 to GCC 5.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using using Mk/bsd.octave.mk which in turn has USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++14-lang,
c++11-lang, c++0x, c11, or gcc-c++11-lib.
PR: 216707
Never set WRKSRC when using USE_GITHUB.
If you want to set WRKSRC, set GH_PROJECT instead.
- The GitHub URLs are case insensitive, but the distribution files you
get out of them are not.
- If the repository was renamed, the old URL will still work, but the
distribution name will be ith the new name.
Sponsored by: Absolight
Bump PORTREVISIONS for ports depending on the canonical version of GCC and
lang/gcc which have moved from GCC 4.8.5 to GCC 4.9.4 (at least under some
circumstances such as versions of FreeBSD or platforms).
In particular that is ports with USE_GCC=yes, USE_GCC=any, or one of
gcc-c++11-lib, openmp, nestedfct, c++11-lib as well as c++14-lang,
c++11-lang, c++0x, c11 requested via USES=compiler.
Don't install the network applet. It doesn't work because it uses on
NetworkManager. This stops cinnamon complaining that one of the applets
didn't start when you login.
The FreeBSD GNOME team proudly presents GNOME 3.16 for FreeBSD.
The offical GNOME 3.16 release notes can be found at
https://help.gnome.org/misc/release-notes/3.16/
Upgrade instructions for port users:
Delete the old tracker package with:
# pkg delete -f tracker
And user port upgrade tool of choice to upgrade.
Thanks to Antoine Brodin for running the exp-runs.
This release was made possible by the following people:
Gustau Perez
Ting-Wei_Lan
PR: 201980
Update the cinnamon stack to the latest in the 2.4 series.
sysutils/cinnamon-settings-daemon to 2.4.3.
x11/cinnamon to 2.4.6.
x11/cinnamon-screensaver to 2.4.1.
x11/cinnamon-session to 2.4.3.
x11-fm/nemo to 2.4.5.
x11-wm/muffin to 2.4.4.
Switch cinnamon to py-pillow instead of py-imaging which seems to be
discontinued upstream.
Thanks to Gustau Perez <gustau.perez@gmail.com> for helping to kee
these ports updated.
Obtained from: GNOME dev repo
Unbreak cjs and cinnamon on 9.3 and 8.4. The spidermonkey 24.0 code needs
GCC 4.4+ or clang to build.
Submitted by: Barbara Guida <barbara.freebsd@gmail.com>
Update cinnamon to 2.4, this should fix [1] and [2].
Update totem to 3.14 now that we have gstreamer 1.4 and minor gnome updates.
Update evolution suite to 3.12.9.
Make sure gtk30 pulls in adwait-icon-theme, since it now the default theme [3].
PR: 195290 [1], 195289 [2], 195455 [3]
Obtained from: gnome devel repo
The FreeBSD GNOME team proudly presents GNOME 3.14 and Cinnamon 2.2.
Gnome 3.14.1 and Cinnamon 2.2.16 are supported on FreeBSD 9.3-RELEASE and up.
This commit removes the old GNOME 2 desktop, bindings and some ports that
can't be compiled. A few ports where updated to more recent versions to
allow them to compile with this update.
Apart from updating ports to newer versions
GDM is more integrated with gnome-shell now, and handles several things for
the GNOME desktop such as screen locking. If you want to use GNOME 3 via
startx, you will have to add your own lock screen/screensaver. For example
xscreensaver
can be used for sessions started without GDM.
Shell Extensions can be installed via https://extensions.gnome.org/ , we have
(Only the first 15 lines of the commit message are shown above )
