| Port details |
- py-ptyprocess Run a subprocess in a pseudo terminal
- 0.7.0_1 sysutils
 =5      0.7.0Version of this port present on the latest quarterly branch. - Maintainer: robak@FreeBSD.org
- Port Added: 2015-06-22 16:48:34
- Last Update: 2025-03-08 04:05:21
- Commit Hash: 06a08e6
- People watching this port, also watch:: indexinfo, libXdamage, libevent, libexif, py39-pexpect
- Also Listed In: python
- License: ISCL
- WWW:
- https://github.com/pexpect/ptyprocess
- Description:
- Launch a subprocess in a pseudo terminal (pty), and interact with
both the process and its pty.
Sometimes, piping stdin and stdout is not enough. There might be
a password prompt that doesn't read from stdin, output that changes
when it's going to a pipe rather than a terminal, or curses-style
interfaces that rely on a terminal. If you need to automate these
things, running the process in a pseudo terminal (pty) is the answer.
  ¦  ¦  ¦  ¦ 
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}ptyprocess>0:sysutils/py-ptyprocess@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/sysutils/py-ptyprocess/ && make install clean
- To add the package, run one of these commands:
- pkg install sysutils/py-ptyprocess
- pkg install py311-ptyprocess
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py311-ptyprocess listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py311-ptyprocess
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1637075664
SHA256 (ptyprocess-0.7.0.tar.gz) = 5c5d0a3b48ceee0b48485e0c26037c0acd7d29765ca3fbb5cb3831d347423220
SIZE (ptyprocess-0.7.0.tar.gz) = 70762
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py311-setuptools>=63.1.0 : devel/py-setuptools@py311
- python3.11 : lang/python311
- Test dependencies:
-
- python3.11 : lang/python311
- Runtime dependencies:
-
- python3.11 : lang/python311
- This port is required by:
- for Build
-
Deleted ports which required this port:
- for Run
-
- misc/py-pexpect
- net/py-terminado
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:- No options to configure
- Options name:
- sysutils_py-ptyprocess
- USES:
- python
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.7.0_1
08 Mar 2025 04:05:21
 |
Charlie Li (vishwin) |
python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal
Any missed ports, feel free to bump.
Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details. |
0.7.0
27 Jun 2023 19:34:34
|
Rene Ladan (rene) |
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568> |
0.7.0
11 Jan 2023 15:58:34
|
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.7.0
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.7.0
17 Nov 2021 10:23:55
|
Bartek Rutkowski (robak) |
sysutils/py-ptyprocess: Update 0.6.0 -> 0.7.0 |
0.6.0
10 Jun 2021 14:46:22
|
Po-Chuan Hsieh (sunpoet) |
sysutils/py-ptyprocess: Add NO_ARCH
Approved by: portmgr (blanket) |
0.6.0
07 Apr 2021 08:09:01
|
Mathieu Arnold (mat) |
One more small cleanup, forgotten yesterday.
Reported by: lwhsu |
0.6.0
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.6.0
28 Dec 2020 23:02:15
 |
antoine |
Drop python 2.7 support from a few ports
With hat: portmgr |
0.6.0
02 Feb 2019 10:43:31
|
robak |
sysutils/py-ptyprocess: Update 0.5.1 -> 0.6.0
Sponsored by: Pixeware LTD <contracting@pixeware.com> |
0.5.1
30 Nov 2017 15:50:34
 |
mat |
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the (Only the first 15 lines of the commit message are shown above ) |
0.5.1
07 Jun 2017 15:39:37
|
woodsb02 |
[NEW] sysutils/py3-ptyprocess: Create Python 3.x version of port
The latest www/py-requests update [1] unbundled its dependencies, now
requiring chardet, idna, urllib3 and certifi from ports.
www/py3-requests port was not tested during QA, which would have highlighted
the need for many new py3-* ports (and their dependencies).
This change creates one of those ports.
[1] https://svnweb.freebsd.org/changeset/ports/442565
PR: 219833 |
0.5.1
03 Mar 2016 11:52:25
|
robak |
sysutils/py-ptyprocess: update 0.5 -> 0.5.1 |
0.5
22 Jun 2015 16:48:25
|
robak |
sysutils/py-ptyprocess: NEW PORT - Run a subprocess in a pseudo terminal
Launch a subprocess in a pseudo terminal (pty), and interact with
both the process and its pty.
Sometimes, piping stdin and stdout is not enough. There might be
a password prompt that doesn't read from stdin, output that changes
when it's going to a pipe rather than a terminal, or curses-style
interfaces that rely on a terminal. If you need to automate these
things, running the process in a pseudo terminal (pty) is the answer.
WWW: https://github.com/pexpect/ptyprocess
Submitted by: robak@FreeBSD.org |
As an Amazon Associate I earn from qualifying purchases.