Port details |
- p5-HTML-Template-JIT Perl module to compile HTML Templates with Inline::C
- 0.05_3 www =3 0.05_3Version of this port present on the latest quarterly branch.
- Maintainer: perl@FreeBSD.org
- Port Added: 2004-05-07 11:13:15
- Last Update: 2023-11-06 10:03:47
- Commit Hash: 06df180
- People watching this port, also watch:: nc, p5-Date-Chinese, newfile, p5-MIME-Tools, pure-ftpd
- Also Listed In: perl5
- License: ARTPERL10
- WWW:
- https://html-template.sourceforge.net/html_template_jit.html
- Description:
- This module provides a just-in-time compiler for HTML::Template.
If your template needs to be compiled - either because it has changed
or because it has never been compiled - then HTML::Template::JIT uses
HTML::Template and Inline::C to compile your template to native
machine instructions.
The resulting compiled template is much faster than a normal cached
template. Benchmarks show HTML::Template::JIT, with a precompiled
template, performing 4 to 8 times faster than HTML::Template in cache
mode.
- ¦ ¦ ¦ ¦
- Manual pages:
- FreshPorts has no man page information for this port.
- pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- p5-HTML-Template-JIT>0:www/p5-HTML-Template-JIT
- To install the port:
- cd /usr/ports/www/p5-HTML-Template-JIT/ && make install clean
- To add the package, run one of these commands:
- pkg install www/p5-HTML-Template-JIT
- pkg install p5-HTML-Template-JIT
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: p5-HTML-Template-JIT
- Flavors: there is no flavor information for this port.
- distinfo:
- SHA256 (HTML-Template-JIT-0.05.tar.gz) = a43601f70b28eef1ee99e7175efcb8925bc40b21d48b3b9ddd61f69513babca3
SIZE (HTML-Template-JIT-0.05.tar.gz) = 30221
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- p5-HTML-Template>=2.8 : www/p5-HTML-Template
- p5-Inline>=0.43 : devel/p5-Inline
- p5-Inline-C>=0 : devel/p5-Inline-C
- perl5>=5.36<5.37 : lang/perl5.36
- perl5>=5.36<5.37 : lang/perl5.36
- Runtime dependencies:
-
- p5-HTML-Template>=2.8 : www/p5-HTML-Template
- p5-Inline>=0.43 : devel/p5-Inline
- p5-Inline-C>=0 : devel/p5-Inline-C
- perl5>=5.36<5.37 : lang/perl5.36
- There are no ports dependent upon this port
Configuration Options:
- No options to configure
- Options name:
- www_p5-HTML-Template-JIT
- USES:
- perl5
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
Commit | Credits | Log message |
0.05_3 06 Nov 2023 10:03:47 |
Rodrigo Osorio (rodrigo) |
*/*: Update WWW to use HTTPS for sourceforge.net projects
Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems
Approved by: portmgr (blanket)
PR: 274888 |
07 Sep 2022 21:58:51 |
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.05_3 07 Sep 2022 21:10:59 |
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above ) |
0.05_3 20 Jul 2022 14:23:26 |
Tobias C. Berner (tcberner) |
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above ) |
0.05_3 06 Apr 2021 14:31:07 |
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
0.05_3 06 Oct 2018 13:06:45 |
des |
Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.
Approved by: portmgr (adamw) |
0.05_3 01 Apr 2016 14:33:58 |
mat |
Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.
With hat: portmgr
Sponsored by: Absolight |
0.05_3 03 Jan 2015 07:13:06 |
sunpoet |
- Update *_DEPENDS
- Add LICENSE
- Simplify Makefile
- Bump PORTREVISION for dependency change |
0.05_2 26 Nov 2014 13:08:38 |
mat |
Change the way Perl modules are installed, update the default Perl to 5.18.
Before, we had:
site_perl : lib/perl5/site_perl/5.18
site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
perl_man3 : lib/perl5/5.18/man/man3
Now we have:
site_perl : lib/perl5/site_perl
site_arch : lib/perl5/site_perl/mach/5.18
perl_man3 : lib/perl5/site_perl/man/man3
Modules without any .so will be installed at the same place regardless of the (Only the first 15 lines of the commit message are shown above ) |
0.05_1 29 Jan 2014 12:23:20 |
miwi |
- Stage support |
0.05_1 20 Sep 2013 23:36:54 |
bapt |
Add NO_STAGE all over the place in preparation for the staging support (cat:
www) |
0.05_1 02 Aug 2013 18:52:11 |
mat |
- Convert to new perl framework
- Trim Makefile header
- Remove MAKE_JOBS_SAFE=yes, it's the default. |
0.05_1 26 Jul 2013 18:02:29 |
az |
- switch simple inline replacement from perl to sed
and remove where is no need in this anymore.
- trim Makefile header
Approved by: bapt@ (portmrg@) |
0.05_1 21 Jan 2012 17:40:15 |
eadler |
At the moment 1385 ports use BUILD_DEPENDS= ${RUN_DEPENDS} and 450
ports use BUILD_DEPENDS:= ${RUN_DEPENDS}. This patch fixes ports that are
currently broken. This is a temporary measure until we organically stop using
:= or someone(s) spend a lot of time changing all the ports over.
Explicit duplication > := > = and this just moves ports one step to the left
Approved by: portmgr |
0.05_1 19 Mar 2011 12:38:54 |
miwi |
- Get Rid MD5 support |
0.05_1 16 Jan 2010 14:45:49 |
kuriyama |
- Remove unneeded dependencies which is in perl-5.8.9 dist from ports
maintained by (perl|ports|kuriyama)@FreeBSD.org.
- Targets are: Test::Simple, Digest::MD5, Locale-Maketext,
ExtUtils::MakeMaker, ExtUtils::ParseXS, File::Temp, Getopt::Long,
Encode, Digest, Pod::Parser, File::Spec. |
0.05 16 Aug 2009 09:55:32 |
linimon |
Reset mat@FreeBSD.org due to maintainer-timeouts and no response to email.
Hat: portmgr |
0.05 31 Aug 2007 13:37:23 |
mat |
Use the CPAN site macro.
Use DISTVERSION in place of DISTNAME where possible.
Remove perl 5.005 shims. |
0.05 14 Jun 2006 11:41:35 |
mat |
Update to 0.05
PR: 98648
Submitted by: Rong-En Fan <rafan@infor.org> |
0.04_2 22 Jan 2006 02:58:25 |
edwin |
Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry
Approved by: krion@
PR: ports/88711 (related) |
0.04_2 14 Nov 2005 14:16:12 |
mat |
Be hipe and add SHA256 |
0.04_2 19 Aug 2004 16:20:11 |
mat |
Add some patches :
+ Fix 8bit symbols escaping.
+ Allow blessed hashrefs in loops.
+ Fix a portlint warning and make it not clutter perllocal.pod
PR: 70656
Submitted by: Alex Kapranoff <kappa@rambler-co.ru> |
0.04_1 07 May 2004 14:06:04 |
mat |
Fix a indent issue
Submitted by: alex@kapranoff.ru
Forgotten by: me |
0.04 07 May 2004 11:12:38 |
mat |
Add p5-HTML-Template-JIT 0.04, perl module to compile HTML Templates
with Inline::C.
PR: ports/66351
Submitted by: alex@kapranoff.ru |