| Port details |
- py-http-parser HTTP request/response parser for python in C
- 0.9.0 www
 =1      0.9.0Version of this port present on the latest quarterly branch. - Maintainer: rm@FreeBSD.org
- Port Added: 2014-10-09 12:35:37
- Last Update: 2023-01-11 15:58:34
- Commit Hash: 77d6847
- People watching this port, also watch:: python, unoconv, py39-pycparser, sysinfo
- License: MIT
- Description:
- HTTP request/response parser for Python compatible with Python 2.x (>=2.6),
Python 3 and Pypy. If possible a C parser based on http-parser
from Ryan Dahl will be used.
  ¦  ¦  ¦  ¦  - pkg-plist: as obtained via:
make generate-plist - There is no configure plist information for this port.
- Dependency lines:
-
- ${PYTHON_PKGNAMEPREFIX}http-parser>0:www/py-http-parser@${PY_FLAVOR}
- To install the port:
- cd /usr/ports/www/py-http-parser/ && make install clean
- To add the package, run one of these commands:
- pkg install www/py-http-parser
- pkg install py39-http-parser
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.
NOTE: This is a Python port. Instead of py39-http-parser listed in the above command, you can pick from the names under the Packages section.- PKGNAME: py39-http-parser
- Package flavors (<flavor>: <package>)
- distinfo:
- TIMESTAMP = 1618343263
SHA256 (http-parser-0.9.0.tar.gz) = 441d3a57c6227230f98aa97539da006fda0f8f4880bc4c5cd895ff2138a52621
SIZE (http-parser-0.9.0.tar.gz) = 167091
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- Test dependencies:
-
- python3.9 : lang/python39
- Runtime dependencies:
-
- py39-setuptools>=63.1.0 : devel/py-setuptools@py39
- python3.9 : lang/python39
- There are no ports dependent upon this port
Configuration Options:- No options to configure
- Options name:
- www_py-http-parser
- USES:
- python:3.6+
- FreshPorts was unable to extract/find any pkg message
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
0.9.0
11 Jan 2023 15:58:34
 |
Dmitry Marakasov (amdmi3) |
*/*: rename CHEESESHOP to PYPI in MASTER_SITES
PR: 267994
Differential revision: D37518
Approved by: bapt |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
0.9.0
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
0.9.0
19 Apr 2021 14:53:15
|
Kai Knoblich (kai) |
www/py-http-parser: Fix packaging with Python 3.8+
* Apply the same fix as in 9cb5898561b302d952fec8e2fac66a945a2c4915 by
stripping libraries by wildcard paths.
* Also use PYTHONPREFIX_SITELIBDIR instead PYTHON_SITELIBDIR to make
the port PREFIX safe while I'm here.
PR: 253815
Approved by: python (with hat) |
0.9.0
14 Apr 2021 12:46:33
|
Ruslan Makhmatkhanov (rm) |
www/py-http-parser: minor adjustments
- use DISTVERSION instead of PORTVERSION
- set minimal python version required to 3.6+ (while technically it
works with anything from 2.6+) |
0.9.0
14 Apr 2021 12:38:47
|
Ruslan Makhmatkhanov (rm) |
www/py-http-parser: update to 0.9.0 |
0.8.3
14 Apr 2021 12:37:09
|
Ruslan Makhmatkhanov (rm) |
www/py-http-parser: re-add removed port |
0.8.3
27 Jan 2020 17:18:16
 |
rene |
Remove expired ports (part 2):
2020-01-27 security/kedpm: Unmaintained, uses EOLed python27
2020-01-27 security/parano: Unmaintained, uses EOLed python27
2020-01-27 security/py-cryptkit: Unmaintained, uses EOLed python27
2020-01-27 security/py-fchksum: Unmaintained, uses EOLed python27
2020-01-27 security/py-mhash: Unmaintained, uses EOLed python27
2020-01-27 security/py-pow: Unmaintained, uses EOLed python27
2020-01-27 security/py-pycryptopp: Unmaintained, uses EOLed python27
2020-01-27 security/py-trustedpickle: Unmaintained, uses EOLed python27
2020-01-27 security/py-twofish: Unmaintained, uses EOLed python27
2020-01-27 security/revelation: Unmaintained, uses EOLed python27
2020-01-27 security/spike-proxy: Unmaintained, uses EOLed python27
2020-01-27 security/umit: Unmaintained, uses EOLed python27
2020-01-27 sysutils/feather: Unmaintained, uses EOLed python27 (Only the first 15 lines of the commit message are shown above ) |
0.8.3
26 Dec 2019 07:54:29
|
antoine |
Deprecate a few ports
With hat: portmgr |
0.8.3
05 Apr 2019 15:29:38
|
amdmi3 |
- Document incompatibility with python 3.7+
Approved by: portmgr blanket |
0.8.3
24 Feb 2018 13:37:52
|
sunpoet |
Add LICENSE_FILE
- Strip shared library in post-install: |
0.8.3
23 Feb 2018 21:09:47
|
rene |
Reset vg@'s ports after he resigned.
With hat: portmgr-secretary |
0.8.3
09 Oct 2014 12:35:27
|
vg |
HTTP request/response parser for Python compatible with Python 2.x (>=2.6),
Python 3 and Pypy. If possible a C parser based on http-parser
from Ryan Dahl will be used.
WWW: https://github.com/benoitc/http-parser/ |
As an Amazon Associate I earn from qualifying purchases.