www/py-webargs: Update 8.4.0 → 8.5.0

Changelog:
https://github.com/marshmallow-code/webargs/blob/8.5.0/CHANGELOG.rst

PR:	280939

www/py-webargs: Upgrade to 8.4.0

Changelog:
https://github.com/marshmallow-code/webargs/blob/dev/CHANGELOG.rst#840-2024-01-07

PR:             278211
Approved by:    submitter is maintaner

*: Switch consumers over to Django 4.2

Django 3.2 reached its End-of-Life on 1st April 2024 and Django 4.2 is
the new LTS (= Long Term Support) release which will be supported until
April 2026.

* Switch most ports that use www/py-django32 to www/py-django42.

* Ports that are not compatible with Django 3.2 have already been set
  with an expiration date were not taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		276319
Reviewed by:	dvl, grembo, ultima
Approved by:	bofh (implicit), dvl, grembo, Kevin Golding, sunpoet,
		ultima, maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D44637

*: Fix build after 3232af18957315da73e0e4105cac869d8cb3c6b1 (www/py-flask
PORTNAME change)

Approved by:	portmgr (blanket)

www/py-webargs: Update to 8.3.0

PR:		273153
Changelog:	https://github.com/marshmallow-code/webargs/blob/dev/CHANGELOG.rst#830-2023-07-10

www/py-webtest: Move www/py-WebTest to www/py-webtest

- Use lowercase PORTNAME and path
- Bump PORTREVISION of dependent ports for dependency change
- While I'm here, fix py-zope.testbrowser

error in zope.testbrowser setup command: 'install_requires' must be a string or
list of strings containing valid project/version requirement specifiers;
Expected end or semicolon (after name and no valid version specifier)
    pytz > dev
         ^
*** Error code 1

Stop.
make: stopped in /usr/ports/devel/py-zope.testbrowser

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

www/py-WebTest: chase PORTNAME in consumers after d35a222edd93

===>   py39-pecan-1.3.3 depends on package: py39-WebTest>=1.3.1 - not found
===>   Installing existing package /packages/All/py39-webtest-3.0.0.pkg
Installing py39-webtest-3.0.0...
[...]
Extracting py39-webtest-3.0.0: .......... done
===>   py39-pecan-1.3.3 depends on package: py39-WebTest>=1.3.1 - not found
*** Error code 1

Reported by:	pkg-fallout

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

www/py-webargs: Update to 8.2.0

ChangeLog:	https://github.com/marshmallow-code/webargs/blob/dev/CHANGELOG.rst#820-2022-07-11
PR:		265235

www/py-django32: Switch consumers over to Django 3.2

Django 2.2 became End-of-Life on 11th April 2022 and Django 3.2 is the
new LTS (= Long Term Support) release which will be supported until
April 2024.

* Switch the most ports that use www/py-django22 to www/py-django32

* Switch www/seahub over to www/py-djangorestframework

* Ports that are not yet ready for Django 3.2 (only three so far) or
  those that have already been set with an expiration date were not
  taken into account.

* Bump PORTREVISION due dependency change where necessary.

PR:		261313
Reviewed by:	bofh, dvl, koobs, ultima
Approved by:	bofh, dvl, koobs, ultima, sunpoet, Kevin Golding, Ivan Rozhuk,
		Alexander Sieg (maintainers)
		maintainer timeout (remaining maintainers)
Differential Revision:	https://reviews.freebsd.org/D34859

www/py-webargs: Update to 8.1.0

PR:		261594

www/py-webargs: Add CPE information

Approved by:	portmgr (blanket)

www/py-webargs: Update to 8.0.1

Changelog:	https://github.com/marshmallow-code/webargs/blob/dev/CHANGELOG.rst#801-2021-08-12

PR:		257856

www/py-webargs: Update to 8.0.0

Changes:
https://github.com/marshmallow-code/webargs/blob/dev/CHANGELOG.rst#800-2021-04-08

PR:		255283
Submitted by:	Goran Mekić <meka AT tilda DOT center> (maintainer)

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Simplify some ports using PYTHON_VER and Python 3.6+

www/py-webargs: Update to 7.0.1

Changelog:
https://github.com/marshmallow-code/webargs/blob/dev/CHANGELOG.rst#701-2020-12-14

PR:		252440
Submitted by:	Goran Mekic <meka@tilda.center> (maintainer)
Approved by:	arrowd (mentor)
Differential Revision:	https://reviews.freebsd.org/D28037

www/py-webargs: Update to 6.1.1

Changelog:	https://github.com/marshmallow-code/webargs/blob/dev/CHANGELOG.rst#611-2020-09-08

PR:		249220
Submitted by:	Goran Mekic <meka@tilda.center> (maintainer)
MFH:		2020Q3 (blanket: bugfix release)

www/py-webargs: Update to 6.1.0

Changelog:	https://github.com/marshmallow-code/webargs/blob/6.1.0/CHANGELOG.rst

PR:		246249
Submitted by:	Goran Mekic <meka@tilda.center> (maintainer)

www/py-webargs: invoking 3s rule on portepoch bump

- downgrade is no longer needed for dependencies

www/py-webargs: Downgrade to 5.5.3

PR:		244948
Submitted by:	Goran Mekic <meka@tilda.center>  (maintainer)

www/py-webargs: Update to 6.0.0

PR:		244727
Submitted by:	Goran Mekic <meka@tilda.center>  (maintainer)

www/py-webargs: Update to 5.5.3

PR:		243828
Submitted by:	Goran Mekic <meka@tilda.center> (maintainer)

[NEW] www/py-webargs: Python library for parsing and validating HTTP request
objects

webargs is a Python library for parsing and validating HTTP request
objects, with built-in support for popular web frameworks, including
Flask, Django, Bottle, Tornado, Pyramid, webapp2, Falcon, and aiohttp

WWW: https://github.com/marshmallow-code/webargs

PR:		242610
Submitted by:	Goran Mekic <mekaat tilda center>