| Port details |
- rubygem-sinatra1 Classy web development framework in ruby
- 1.4.8 www
 =1      Version of this port present on the latest quarterly branch. - Maintainer: sunpoet@FreeBSD.org
- Port Added: 2017-05-16 18:21:16
- Last Update: 2023-01-14 23:08:33
- Commit Hash: 18c6e18
- People watching this port, also watch:: py39-pycparser, py39-Automat, p5-CPAN-Meta-YAML, p5-Net-HTTP, python
- Also Listed In: rubygems
- License: MIT
- Description:
- Sinatra is a DSL for quickly creating web-applications in Ruby
with minimal effort. It sits on top of Rack, a minimal standard
interface for Ruby web frameworks. For templating, the choices
include erb, haml, sass and Builder.
  ¦  ¦  ¦  ¦  - pkg-plist: as obtained via:
make generate-plist - Dependency lines:
-
- rubygem-sinatra1>0:www/rubygem-sinatra1
- To install the port:
- cd /usr/ports/www/rubygem-sinatra1/ && make install clean
- To add the package, run one of these commands:
- pkg install www/rubygem-sinatra1
- pkg install rubygem-sinatra1
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above.- PKGNAME: rubygem-sinatra1
- Flavors: there is no flavor information for this port.
- distinfo:
- TIMESTAMP = 1485797857
SHA256 (rubygem/sinatra-1.4.8.gem) = 18cb20ffabf31484b02d8606e450fbf040b52aea6147755a07718e9e0ffddd2f
SIZE (rubygem/sinatra-1.4.8.gem) = 369152
Packages (timestamps in pop-ups are UTC):
- Dependencies
- NOTE: FreshPorts displays only information on required and default dependencies. Optional dependencies are not covered.
- Build dependencies:
-
- ruby30 : lang/ruby30
- gem : devel/ruby-gems
- Runtime dependencies:
-
- rubygem-rack16>=1.5<2 : www/rubygem-rack16
- rubygem-rack-protection1>=1.4<2 : www/rubygem-rack-protection1
- rubygem-tilt>=1.3<3 : devel/rubygem-tilt
- ruby30 : lang/ruby30
- gem : devel/ruby-gems
- Patch dependencies:
-
- ruby30 : lang/ruby30
- gem : devel/ruby-gems
-
- This port is required by:
- for Run
-
- databases/leo_center
- net-mgmt/rubygem-oxidized-web
- net-mgmt/rubygem-visage-app
- www/rubygem-sinatra-contrib1
- www/rubygem-sinatra-respond_to
-
Deleted ports which required this port:
- * - deleted ports are only shown under the This port is required by section. It was harder to do for the Required section. Perhaps later...
Configuration Options:- No options to configure
- Options name:
- www_rubygem-sinatra1
- USES:
- cpe gem
- pkg-message:
- For install:
- Sinatra optionally integrates with haml/sass or Builder
for templating and mongrel or thin as an HTTP server.
To use them, install the respective ports separately:
www/rubygem-haml
devel/rubygem-builder
www/rubygem-mongrel
www/rubygem-thin
- WWW: http://www.sinatrarb.com/
- Master Sites:
|
| Commit History - (may be incomplete: for full details, see links to repositories near top of page) |
| Commit | Credits | Log message |
|---|
1.4.8
14 Jan 2023 23:08:33
 |
Muhammad Moinur Rahman (bofh) |
Mk/**ruby.mk: Switch from USE_RUBY=yes to USES=ruby
Switch from Mk/bsd.ruby.mk to Mk/Uses/ruby.mk
Notable changes are.
- Mk/bsd.ruby.mk is moved to Mk/Uses/ruby.mk.
- USE_RUBY=yes is replaced with USES=ruby.
- USE_RUBY_EXTCONF is replaced with USES=ruby:extconf.
- USE_RUBY_RDOC is replaced with USES=ruby:rdoc.
- USE_RUBY_SETUP is replaces with USES=ruby:setup.
- RUBY_NO_BUILD_DEPENDS and RUBY_NO_RUN_DEPENDS are replaced with
USES=ruby:{build,none,run}.
- RUBY_REQUIRE isn't used anywhere, so removed.
- USES=gem now implies USES=ruby.
This is mainly the work of yasu@ at https://reviews.freebsd.org/D27863
I have just made some cosmetic changes and ran exp-run to test that the
tree is not in a BROKEN state.
Approved by: portmgr
Differential Revision: https://reviews.freebsd.org/D37925 |
07 Sep 2022 21:58:51
|
Stefan Eßer (se) |
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner) |
1.4.8
07 Sep 2022 21:10:59
|
Stefan Eßer (se) |
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above  ) |
1.4.8
20 Jul 2022 14:23:26
|
Tobias C. Berner (tcberner) |
www: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
*
* <hvo.pm@xs4all.nl>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron LI <aly@aaronly.me>
* Aaron Zauner <az_mail@gmx.at>
* Abel Chow <achow@transoft.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Adrian Steinmann <ast@marabu.ch>
* Akinori MUSHA aka knu <knu@idaemons.org> (Only the first 15 lines of the commit message are shown above ) |
1.4.8
25 Oct 2021 15:58:06
|
Po-Chuan Hsieh (sunpoet) |
www/rubygem-sinatra1: Cosmetic change |
1.4.8
21 Oct 2021 15:41:00
|
Stefan Eßer (se) |
www/rubygem-sinatra1: Add CPE information
Approved by: portmgr (blanket) |
1.4.8
06 Apr 2021 14:31:07
|
Mathieu Arnold (mat) |
Remove # $FreeBSD$ from Makefiles. |
1.4.8
24 Aug 2019 00:10:21
 |
sunpoet |
Update version requirement of RUN_DEPENDS |
1.4.8
14 Aug 2019 12:25:09
|
mat |
Convert to UCL & cleanup pkg-message (categories w) |
1.4.8
16 May 2017 18:19:27
|
sunpoet |
Add rubygem-sinatra1 1.4.8 (copied from rubygem-sinatra)
- Change RUN_DEPENDS from rubygem-rack-protection to rubygem-rack-protection1
- Add PORTSCOUT |
As an Amazon Associate I earn from qualifying purchases.