The Lumina Desktop Environment is a lightweight system interface that is
designed for use on any Unix-like operating system. It takes a
plugin-based approach, allowing the entire interface to be assembled or
arranged by each individual user as desired, with a system-wide default
layout which can be customized by the system administrator. This allows
every system (or user session) to be designed to maximize the individual
user's productivity.
===> The following configuration options are available for lumina-core-1.6.2_11:
MULTIMEDIA=on: Install multimedia support backend (gstreamer)
NLS=on: Native Language Support
TRUEOS=off: Use the TrueOS system interface settings.
===> Use 'make config' to modify these settings
The Lumina Desktop Environment has been installed!
An entry for for launching Lumina from a graphical login manager has already been added to the system, but if you with to start Lumina manually, you will need to do one of the following:
1) Run "start-lumina-desktop" directly from the command line after logging in.
2) Put the line "exec start-lumina-desktop" at the end of your user's "~/.xinitrc" file before running startx with any special X11 flags
Also note that the system-wide default settings for Lumina are contained in ${PREFIX}/etc/luminaDesktop.conf[.dist]. While it is possible to customize the desktop to the user's liking after logging in, you may want to adjust the default settings as necessary if there are multiple user accounts on this system.
x11/lumina-core: Fix new window resize issue
New windows were sometimes inappropirately resized when near the
bottom of the screen. This was due to the erroneous use of
setBottom() where moveBottom() was needed to move, rather than
resize the window.
x11/lumina-core: Expand battery icon notification
Add additional color changes to yellow and orange during discharge
for earlier warning about low battery.
Add change to green at 80% during charge to indicate optimal
time to unplug for minimizing battery wear.
lumina*: Adopt from ports@
Taking over maintenance of the following ports
and beginning work on upstream code
deskutils/lumina-archiver
deskutils/lumina-calculator
deskutils/lumina-fileinfo
deskutils/lumina-fm
deskutils/lumina-mediaplayer
deskutils/lumina-pdf
deskutils/lumina-photo
deskutils/lumina-screenshot
deskutils/lumina-textedit
x11/lumina-core
x11/lumina-coreutils
x11/lumina
x11/lumina-core: Disable CPU-saturating "Warp" screensaver
Lumina currently has no configuration interface for the screensaver,
so users cannot prevent Warp from starting and using all available
CPU time. This is a temporary hack to make Lumina more CPU-friendly
until the screensaver options are configurable.
Mk/Uses: always use colon for build/run suffix
Most USES use a colon for build/run(/test) suffixes. Change kde.mk,
qt.mk and pyqt.mk to do the same, and update all ports using that.
Document in CHANGES.
PR: 266034
Exp-run by: antoine
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D36349
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
x11: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* Adam Weinberger <adam@vectors.cx>
* Adam Weinberger <adamw@FreeBSD.org>
* Alex Dupre <ale@FreeBSD.org>
* Alexander Matey <matey@cis.ohio-state.edu>
* Alexander Nedotsukov <bland@FreeBSD.org>
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Alexey Dokuchaev <danfe@regency.nsu.ru>
* Alexey Mikhailov <karma@ez.pereslavl.ru>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Anton Berezin <tobez@FreeBSD.org>
* Anton Toernqvist <antont@inbox.lv>
(Only the first 15 lines of the commit message are shown above )
framework: convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert bsd.gstreamer.mk to Uses/gstreamer.mk
- convert ports tree to make use of USES=gstreamer
- remove duplicate dependency lines from the tree
Differential Revision: https://reviews.freebsd.org/D35097
x11/lumina-core: Fix LScreensaver password check
lumina-checkpass was disabled in the previous build, causing the
screensaver to unlock on any input rather than just the correct pw.
Also removed xscreensaver dep, replaced by LScreensaver.
LPanel patch is a hack to redraw the panel after screen resize. Makes
Lumina usable, though still not pretty, in a VirtualBox guest with
guest additions. Still needs wallpaper redraw.
PR: 262320
Approved by: lbartoletti
x11/lumina-core: Replace apm battery monitoring with sysctls()
The apm command does not exist on arm, powerpc, or riscv.
This also reduces CPU time for lumina-desktop.
Patches have been proposed to upstream.
PR: 262018
Approved by: lbartoletti
graphics/mesa-libs: Bump reverse deps for libglvnd
Per discussion with bapt on helping pkg handle the changing of these
deps and avoiding impossible upgrade senarios.
PR: 246767
Reviewed by: manu, bapt
Approved by: x11
Differential Revision: https://reviews.freebsd.org/D30824
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Fix Qt5 symbol version scripts to put the catch-all clause first. When
a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
(Only the first 15 lines of the commit message are shown above )
This port needs USES=compiler:c++11-lang to build on GCC-based architectures.
While here, add USES=gl.
PR: 233926
Submitted by: Piotr Kubaj
Approved by: portmgr (tier-2 blanket)
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
- Fix Lumina ports to use DISTVERSIONSUFFIX properly and not mis-interpret the
-p1
PR: 222452
Submitted by: Ken Moore <ken@pcbsd.org>
Sponsored by: iXsystems
