devel/schilybase: update to 2024-03-21

Changelog: http://fuz.su/pub/schilytools/AN-2024-03-21.txt

archivers/star: include libstreamar

This library is needed only for strar.  Installing it in this package
simplifies omitting the man pages from devel/schilybases.

*/*: Update WWW to use HTTPS for sourceforge.net projects

Homepage link is permanent redirected to its HTTPS counterpart
Issue reported by repology : https://repology.org/repository/freebsd/problems

Approved by:	portmgr (blanket)
PR:		274888

devel/schilybase: update to 2022-10-16

ChangeLog: http://fuz.su/pub/schilytools/AN-2022-10-16.txt

This commit creates a new port archivers/tartest splitted off from
archivers/star. misc/schilytools depends now on this new port.

PR:		267131
Reported by:	fuz@fuz.su (maintainer)

devel/schilybase: update to 2022-09-18

 - point MASTER_SITES to new upstream
 - split bosh from sysutils/schilyutils into new port shells/bosh
   - stop installing pfbosh, a SunOS-only feature
   - install jsh as jbosh to avoid a conflict
   - patch shell names in man pages
 - point WWW to subproject-specific sites if available
 - misc/schilytools: deprecate man2html component
 - devel/schilybase: add missing file to pkg-plist
 - make test suite work better
   - do not pass INS_*BASE/DESTDIR to smake tests
   - account for devel/sccs placing files in /tmp
   - make sh/tests/common/test-common find bosh after
     we patched out the hardlink to sh
   - Test suite passes on armv7 except for archivers/star.
     Will have to investigate further.
 - sysutils/schilyutils: add vctags command
   I forgot about that one when I made the port initially.
   The ctags link is not installed to avoid conflicts.

Changelog: http://fuz.su/pub/schilytools/AN-2022-09-18.txt

PR:	266475

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

devel/schilybase: 2022 schilytools touchup

Following Jörg Schilling's death in 2021, this is a light touch up of
the port in preparation of future updates at the project's new home.

 - Jörg's domains have started to run out.  Change the WWW to our new
   project lest they point to some unrelated site.
 - Instead of building profiled libraries and then throwing them out,
   have -PROFILE not build these in the first place.
 - Enable symbol versioning for hardening against mismatched library
   versions.  While tested well on Linux, this option was never enabled
   on FreeBSD due to Jörg's lack of experience with the system.  Given
   that the toolchain is pretty much the same, little to now issues are
   to be expected.
 - Relax schilybase dependency to just LIB_DEPENDS to simplify partial
   upgrades.  This is reasonably safe now that symbol versioning has
   been enabled.

WWW:		https://codeberg.org/schilytools/schilytools

ChangeLog: https://codeberg.org/schilytools/schilytools

PR:	265040
Reported by:	fuz@fuz.su (maintainer)

archivers/star: Update pkg-descr after devel/schilybase update.

PR:		258722

devel/schilybase: update to 2021.07.29

- Update to 2021.07.29
- Fix related PR (Do not install broken gnutar by default)

PR:		257063
Reported by:	ice@extreme.hu

misc/schilytools: Consolidate old schily's tools

- Update and consolidate schily's tools into more reasonable state
- Transfer maintenance to Robert Clausecker <fuz@fuz.su>

From Robert Clausecker <fuz@fuz.su> (new maintainer):

In 2018, Jörg Schilling consolidated all his projects into the
schilytools project and stopped providing new separate releases for the
individual projects (such as cdrtools, smake, star, and ved).  Hence,
the FreeBSD ports of these projects have been stuck on outdated versions
for years.

With this changeset, the schilytools are added to the ports collection
as a collection of 10 ports:

Remove # $FreeBSD$ from Makefiles.

Mark as BROKEN on riscv64.

This appears to be an older project that has no autoconf stanza for riscv64.

Approved by:	portmgr (tier-2 blanket)
Obtained from:	lonesome.com build testing

Drop build dependency on GNU m4.

m4 from base is able to do the job, if properly wrapped to mimic GNU m4

Differential Revision:	https://reviews.freebsd.org/D21835

archivers/star: replace in less files and fix build

archivers/star add missing build dependency on m4

Update archivers/star to 1.6

- Spell `LICENSE_FILE' variable correctly
- Fix some nearby bogosities (when noticed)

Takeover maintainership

PR:		213135
Submitted by:	mm@FreeBSD.org
Approved by:	maintainer timeout

Update star to 1.5.3
Allow build with clang
Add patch for FreeBSD NFSv4 ACL support

PR:		212274
Submitted by:	mm@FreeBSD.org
Approved by:	maintainer timeout

Cleanup patches, a* categories.

Rename them to follow the make makepatch naming, and regenerate them.

With hat:	portmgr
Sponsored by:	Absolight

When there is a do-install target, do not use a post-install target, do
everything at once.  Sometime, rename post-install into a options helper
target.

I did not fix ports that were such a mess that I could not figure out
what they really wanted to do.  I also did not change ports that had
some version of an auto-plist code in post-install, for the same reason.

With hat:	portmgr
Sponsored by:	Absolight

Patches don't have keywords expansion.

Sponsored by:	Absolight

Remove ${PORTSDIR}/ from dependencies, Mk and categories a, b, and c.

With hat:	portmgr
Sponsored by:	Absolight

archivers/star: revive port

- update MASTER_SITES
- modernize (staging, USES, manual pages, @sample)
- add license information (CDDL + GPLv2)
- regenerate patches (no content changes)
- pass maintainer to submitter

While here:
- add USE_GCC=any to allow build on FreeBSD 10+

PR:		188974
Submitted by:	Chris Hutchinson (portmaster@BSDforge.com)

Removed some expired ports:

2014-05-12 archivers/star: Depends on deprecated smake
2014-05-12 editors/ved: Depends on deprecated smake
2014-04-12 japanese/chasen: Unmaintained since 2001

Chase smake deprecation

With hat:	portmgr

Remove trailing whitespaces from category archivers

According to the Porter's Handbook (5.12.2.3.) default options must be added to
OPTIONS_DEFINE. This policy has been implemented only recently that's why we
have many ports violating this policy.

This patch adds the default options specified in the Porter's Handbook to
OPTIONS_DEFINE where they are being used. Ports maintained by
gnome@FreeBSD.org, kde@FreeBSD.org and x11@FreeBSD.org have been excluded.

Approved by:    portmgr (bapt)

Add NO_STAGE all over the place in preparation for the staging support (cat:
archivers)

- Convert USE_ICONV=yes to USES=iconv
- Change USE_GNOME=pkgconfig|gnomehack to USES=pathfix|pkgconfig while here

Reviewed by:	bapt, kwm

- Convert USE_GETTEXT to USES (part 3)

Approved by:	portmgr (bapt)

Update to 1.5.2.

PR:		ports/175638
Submitted by:	John Hein <jhein@symmetricom.com>

Use PORT_OPTIONS:MDOCS instead of NOPORTDOCS
Trim headers

The vast majority of pkg-descr files had the following format when they
had both lines:

Author: ...
WWW: ....

So standardize on that, and move them to the end of the file when necessary.

Also fix some more whitespace, and remove more "signature tags" of varying
forms, like -- name, etc.

s/AUTHOR/Author/

A few other various formatting issues

- Get Rid MD5 support

With hat:       portmgr (myself)

Drop maintainership of star, which I haven't been using for a while.

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Upgrade to version 1.5.1.

PR:             ports/141373
Submitted by:   ehaupt

Silence ${MV} command.

Fix package: don't install doc/rmt/default-rmt.sample.

Upgrade to version 1.5 using code from archivers/star-devel; also install srmt
and tartest.

- Fix syntax

Reported by:    FreshSanity
Pointy hat to:  pav

- Mark BROKEN on CURRENT

Reported by:    pointyhat

- Pass literal gmake as MAKEPROG, build breaks when passed full path to gmake
- Allow build on non-english locale

SHA256ify

Approved by:    krion@

At Kris's request, back out the MACHINE_ARCH spelling correction until
after 5.4-RELEASE.

- ARCH is defined in bsd.port.mk

Assist getting more ports working on AMD64 by obeying the
Ports Collection documentation and use 'ARCH' rather than 'MACHINE_ARCH'.

- Register conflict with newly added archivers/star-devel port

Add SIZE data.

Submitted by:   trevor

Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.

(Part 2)

Suppress command echo.

De-pkg-comment my ports + some more.

Update to version 1.4.3.

Take over maintainership.

upgrade to 1.4.2

PR:             45866
Submitted by:   Ports Fury

Fix master_site.
Noticed by: portsurvey

USE_BZIP2

* Fix a typo.
* Allow this to build with other compilers than "cc" or "gcc".

Update to version 1.4.1.

upgrade to 1.4

PR:             39428
Submitted by:   Ports Fury

Tidy up after repo copy of ports/sysutils/star to ports/archivers/star.

PR:             37145
Submitted by:   Thomas Hurst