Astropy is a package intended to contain core functionality and some common
tools needed for performing astronomy and astrophysics research with Python. It
also provides an index for other astronomy packages and tools for managing
them.
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py311-astropy listed in the above command, you can pick from the names under the Packages section.
Mk/Uses/python.mk: Introduce USE_PYTHON=cython3{,_run,_test}
- Update USE_PYTHON=cython{,_run,_test}
- Convert all cython3 occurrence to USE_PYTHON=cython3*
- While I'm here, fix incorrect usage of combining cython3 in BUILD_DEPENDS and
USE_PYTHON=cython
It is added to simplify the future transition from Cython 0.29 to 3.
The minimal version is set to 3.0.12 because it is required by
devel/py-propcache.
The upper bound of version is set to 3.1 because it is limited by multiple
ports.
python: bump all USE_PYTHON=distutils consumers after RUN_DEPENDS removal
Any missed ports, feel free to bump.
Any ports that need setuptools at runtime can have the devel/py-setuptools
manually added back to RUN_DEPENDS, but understand that this practice
is deprecated; see CHANGES for details.
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
astro: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* ABURAYER Rewsirow <rewsirow@ff.iij4u.or.jp>
* Alexander Leidinger
* Alexey Dokuchaev <danfe@FreeBSD.org>
* Andrew Pantyukhin <infofarmer@FreeBSD.org>
* Andrey Zakhvatov
* Anton Berezin <tobez@FreeBSD.org>
* Anton Berezin <tobez@tobez.org>
* Anton Karpov <toxa@toxahost.ru>
* Brion Moss <brion@queeg.com>
* Bruce M Simpson <bms@FreeBSD.org>
* Chris Piazza <cpiazza@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above )
Fix CONFLICTS entries in archivers, astro, audio
Fix conflicts entries based on a script that searches for duplicate
files installed by several ports.
Some patters seem to make ports conflict with themselves, but this is
actually not the case due to the check-*-conflicts logic implemented
in bsd.port.mk, which excludes self-conflicts.
PHP based ports have been ignored in this commit as requested by the
committers currently working on the php-8.1 import.
Approved by: portmgr (implicit)
astro/py-astropy: fix build on GCC architectures
Base GCC doesn't support some new warning flags:
cc1: error: unrecognized command line option "-Wno-unused-result"
cc1: error: unrecognized command line option "-Wno-misleading-indentation"
cc1: error: unrecognized command line option "-Wno-format-overflow"
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
astro/py-astropy: Update 1.1.2 -> 3.1.1
Port changes:
* Replace WWW with the https version
* Now only works for pythion 3.5+
* Add a fix for the wrong plist problem
* Remove patches for compiler warnings, reported them upstream
PR: 231279
Approved by: nwhitehorn@FreeBSD.org (maintainer's timeout; 132 days)
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
astro/py-astropy: create port
Astropy is a package intended to contain core functionality and some common
tools needed for performing astronomy and astrophysics research with Python. It
also provides an index for other astronomy packages and tools for managing
them.
WWW: http://www.astropy.org
PR: 210278
Submitted by: nathanw
