Beast is a powerful music composition and modular synthesis
application. It supports a wide range of standards in the field, such
as MIDI, WAV/AIFF/MP3/OggVorbis/etc audio files and LADSPA modules. It
has excellent technical abilities like multitrack editing, unlimited
undo/redo support, real-time synthesis support, 32bit audio rendering,
full duplex support, multiprocessor support, precise timing down to
sample granularity, on demand loading of partial wave files, on the
fly decoding and full scriptability in scheme. The plugins, synthesis
core and the user interface are actively being developed and
translated into a variety of languages, regularly assimilating user
feedback such as from our FeatureRequests page.
WWW: https://beast.testbit.org/
===> The following configuration options are available for beast-0.7.8_9:
DEBUG=off: Build with debugging support
SSE=on: Use SSE optimized routines
===> Use 'make config' to modify these settings
For ports that are marked BROKEN on armv6, and also fail to build on
armv7, mark them so.
This is part two of a multipart commit to bring armv7 ports to parity
with armv6.
Approved by: portmgr (tier-2 blanket)
Obtained from: lonesome.com -exp run
Mark DEPRECATED with an EXPIRATION_DATE of 2018-01-04 since this port
is based on a 4.5 years old version, at least six versions behind, and
requires an old toolchain [1], and nobody seems to even care.
PR: 196849 [1]
Bump PORTREVISION for ports depending on the canonical version of GCC
(via Mk/bsd.default-versions.mk and lang/gcc) which has moved from
GCC 5.4 to GCC 6.4 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c++11-lib, c++11-lang,
c++14-lang, c++0x, c11, or gcc-c++11-lib.
PR: 219275
Mark some ports failing on power64. In cases where the error message
was a stub, provide a real one.
While here, pet portlint.
Approved by: portmgr (tier-2 blanket)
Reported by: swills
Attempt to fix build on non-x86 archs.
I admit to not understanding the A= B= construct. This hack was the only
way I could figure out to make the flags properly conditionalize.
Most commonly used build systems support silent builds, when they
hide actual commands executed and only show short summary line (like
"CC foo.c"). CMake and ninja enable this by default, some autotools
using ports do as well. This is unacceptable because we need complete
build logs at any time, so we now switch to verbose build logs
unconditionally. Note that this change deliberately affects ALL
builds and not only package builds on cluster, because we need to
be sure that user experiencing failure can always provide informative
build log regardless of settings and without rerunning the build.
Change summary:
- Always do verbose builds for cmake, ninja and GNU configure (the
latter includes check if --disable-silent-rules is actually supported
by the configure script; there are isolated cases when it's not true)
(Only the first 15 lines of the commit message are shown above )
- Convert to option helpers, provide better support and defaults for SSE
- Remove BROKEN on powerpc statement which is no longer true these days
- Wrap overly long USES line and move OPTIONS block lower while I'm here
Part 1 of adding USE_GNOME=intltool to ports that require it.
The reason for this is that in the GNOME 3.16 update, USE_GNOME gtk20 and
gtk30 don't pull intltool in anymore.
PR: 201980
Exp-run by: antoine@
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it. Bump PORTREVISION on their dependent
ports except the ones that depend on these:
audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt
In these cases the same trick as in the recent gettext update is used.
(Only the first 15 lines of the commit message are shown above )
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Update the default version of GCC used in the Ports Collection from
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
- Fix port build (remove BROKEN). Remove -DG_DISABLE_DEPRECATED from
Makefile.(in|am), this port uses deprecated functions from glib20.
- Use gcc 4.6+ to support -std=gnu++0x
- Add stage support
- Convert LIB_DEPENDS to new syntax
- Add desktop-file-utils and shared-mime-info to USES
Update to libmpc version 1.0.1 which brings the following fixes:
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
(Only the first 15 lines of the commit message are shown above )
Convert audio from USE_GMAKE to USES=gmake
While here:
- Trim headers
- Convert some USE_GNOME=pkgconfig to USES=pkgconfig
- Add some missing pkgconf dependencies
- Convert some USE_GNOME=gnomehack to USES=pathfix
Replace USE_GCC=4.6+ and USE_GCC=4.4+ by USE_GCC=yes.
Right now this is a noop in the former case and a noop in the latter
case unless lang/gcc44 has been installed explicitly.
This puts a bit more emphasis on standardizing on a canonical version
"current" GCC and makes it easier to update that canonical version
by changing the default in Mk/bsd.gcc.mk and updating the lang/gcc port.
That is, USE_GCC=yes means "use a decent/modern version of GCC" without
having to worry about details.
Approved by: portmgr (bdrewery)
Add a redirect for a sysctl's stderr. This fixes the package logfile
header being bogus on pointyhat on powerpc, and should have no other
effect.
Approved by: maintainer
Presenting GNOME 2.30.1 for FreeBSD. The offical release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.30/ .
This release brings initial PackageKit support, Upower (replaces power
management part of hal), cuse4bsd integration with HAL and cheese, and a
faster Evolution.
Sadly GNOME 2.30.x will be the last release with FreeBSD 6.X support. This
will also be the last of the 2.x releases. The next release will be the
highly-anticipated GNOME 3.0 which will bring with it a new UI experience.
Currently, there are a few bugs with GNOME 2.30 that may be of note for our
users. Be sure to consult the UPGRADING note or the 2.30 upgrade FAQ at
http://www.freebsd.org/gnome/docs/faq230.html for specific upgrading
instructions, and the up-to-date list of known issues.
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
Presenting GNOME 2.20.1 and all related works for FreeBSD. The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ . Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).
The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy. We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD. This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.
This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully. Ahze and pav also deserve thanks for
(Only the first 15 lines of the commit message are shown above )
Chase the GNOME X11BASE to LOCALBASE move, and fix the build with the
new freetype2 where needed.
Submitted by: mezz, ahze, pav, and many others
Approved by: portmgr (implicit, kris)
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Fully-qualify the path to update-desktop-database and update-mime-database in
the plist since /usr/local/bin isn't in pkg_add's PATH. Bump the PORTREVISION.
- Update to 0.6.4
- Mark IGNORE on FreeBSD 4.x, missing some mathematical functions in math.h
PR: ports/76440
Submitted by: Jean-Yves Lefort <jylefort@brutele.be> (maintainer)
