*/*: Replace CONFIGURE_ARGS with MESON_ARGS

Meson based ports that uses CONFIGURE_ARGS "works" as MESON_ARGS is
appended however framework and documentation expects that MESON_ARGS
is used for Meson based ports

PR:		294808
Approved by:	blanket

libxml2: chase libxml soversion bump

misc/shared-mime-info: add new mimesubdirs

Sponsored by:   Future Crew, LLC
Pull Request:	https://github.com/freebsd/freebsd-ports/pull/335

misc/shared-mime-info: update to 2.4

Sponsored by:   Future Crew, LLC
Co-authored-by:	Gleb Popov <arrowd@FreeBSD.org>
Pull Request:	https://github.com/freebsd/freebsd-ports/pull/331

misc/shared-mime-info: Use SETENVI instead of SETENV

PR:		278684

misc/shared-mime-info: Fix python shebang patch.

Sponsored by:	Serenity Cybersecurity, LLC

misc/shared-mime-info: mark TESTING_UNSAFE

*/*: Sanitize MANPREFIX for meson ports

Approved by:	portmgr

bsd.sites.mk: Update all ports using USE_GITLAB

Replace GL_COMMIT by GL_TAGNAME in all ports. The new GL_TAGNAME is
backwards-compatible (accepting any commit hash as before), but also
understands an actual tag name. Moving to tag names where appropriate is
left to individual ports' maintainers.

Approved by:		portmgr (tcberner, mentor)
Differential Revision:	https://reviews.freebsd.org/D37077

misc/shared-mime-info: remove minixmlto dependency

xmlto is not needed since 2.2

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

misc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adam@vectors.cx>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alan E <alane@FreeBSD.org>
  *  Alex Semenyaka <alex@rinet.ru>
  *  Alex Stangl <alex@stangl.us>
  *  Alexander Logvinov <avl@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexander Nusov <alexander.nusov@nfvexpress.com>
  *  Alexander Timoshenko <gonzo@univ.kiev.ua>

textproc/libxml2: bump all LIB_DEPENDS consumers

This is a separate commit to facilitate easier cherry-picking for
quarterly.

PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)

misc/shared-mime-info: update to 2.2

shared-mime-info 2.2 (2022-03-27)
	* model/3mf: new
	* Match shared libraries with version suffix
	* model/obj: add mtllib and Blender comment based magic
	* model/mtl: add Blender comment magic, increase newmtl range
	* model/obj, model/mtl: new types
	* Add Electron Archive Format type application/x-asar
	* text/x-qml: Lower match priority to avoid conflicts with
	  Python
	* Move '*.blend' to top of Blender glob list
	* Adding SPARQL media types
	* application/zip: Add `*.zipx` glob and test fixture
	* Added DSD mime type

textproc/libxml2: bump all dependencies

This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246

devel/meson: update to 0.60.1

Changes:	https://mesonbuild.com/Release-notes-for-0-60-0.html
PR:		259080
Reported by:	GitHub (watch releases)
Exp-run by:	antoine

misc/shared-mime-info: fix cleanup

update-mime-database generates tons of xml files during the trigger
execution, cleanup should remove them

Reported by:	many

shared-mime-info: use triggers

the rebuild of the database is now handled by a trigger and happen only
once at the end of the transaction instead of after each package
installation.

While make shared-mime-info a runtime only dependency

Reviewed by:	manu, mat
Differential Revision:	https://reviews.freebsd.org/D32452

misc/shared-mime-info: Unbreak this port after
e497a16a286972bfcab908209b11ee6a13d99dc9

===>  Building package for shared-mime-info-2.0
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
pkg-static: Use of '@unexec' is deprecated: Use @preunexec/@postunexec instead
*** Error code 1

Stop.
make: stopped in /usr/ports/misc/shared-mime-info

Approved by:	portmgr (blanket)

Regenerate all distfiles using gitlab as source.

This regeneration is required as the new gitlab version changed
the address and the directory the source files can be downloaded.

This commit also applies some small fixes to make sure all ports using
gitlab are buildable.

Reviewed by:	mat
Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D29628

Remove # $FreeBSD$ from Makefiles.

Switch the dependencies from xmlto to minixmlto.

This avoids a circular dependency on w3m when building w3m with INLINE_IMAGE
option
While here drop the now useless intltool [1]

This also reduces the number of dependencies to build shared mime info, removing
perl
bash from the build dependencies

Reported by:	mi@

misc/shared-mime-info: update to 2.0

shared-mime-info 2.0 (2020-06-05) [1]:
        * Port build system to meson, and ship test suite with tarball
        * Install ITS file to allow gettext to translate mime-type descriptions
        * Add BPS and IPS patch formats
        * Lower weight for "use strict" and similar in the perl mimetype
        * Add new magic for Sega Mega Drive ROMs
        * Add Common Lisp mime-type
        * Rename text/x-tcl to text/tcl
        * Add text/vbscript
        * Add PySpread spreadsheet mime-types
        * Add Kotlin source mime-type
        * Add AVIF image mime-type
        * Split versions of the Audible audio mime types
        * Add *.spx glob for audio/x-speex+ogg
        * Add Apple System Profiler XML mime-type

[1] https://gitlab.freedesktop.org/xdg/shared-mime-info/-/releases

PR:		248558
Reported by:	jbeich

- OPTIONize NLS

PR:		241957
Submitted by:	amdmi3
Approved by:	maintainer timeout (desktop, 2 weeks)

Create desktop@ as maintainer of some shared desktop ports

This idea has been around for quite some time. Time to make it happen.

In order to share the load on the ports required by multiple desktop
environments start to share the responsibility of maintainership.

This is the initial list that came to mind, but we can probably extend it, to
include another handful of ports.

WWW: https://wiki.freebsd.org/DesktopTeam
Mailing List: https://lists.freebsd.org/mailman/listinfo/freebsd-desktop

Approved by:	swills, kwm (gnome), madpilot (xfce)
Differential Revision:	https://reviews.freebsd.org/D22389

Update MASTER_SITES

Approved by:	portmgr (blanket)

Clean up leftovers

With hat:	portmgr

Update to 1.10

Update WWW

Approved by:	portmgr (blanket)

Update to 1.8

Update shared-mime-info to 1.5.

Update shared-mime-info to 1.4.

Remove useless execution of post install script

Cleanup plist

Convert a bunch of USE_XZ to USES=tar:xz.

Approved by:	portmgr (not really, but touches unstaged ports)

The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:

NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE

This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.

This patch also contains updates of libxcb and related ports, pixman, as well

- Stage support

Add NO_STAGE all over the place in preparation for the staging support (cat:
misc)

This port is still not jobs safe, so add back MAKE_JOBS_UNSAFE.

PR:		ports/178362
Submitted by:	mandree@

Update to 1.1.

- Convert USE_GETTEXT to USES (part 1)

Approved by:	portmgr (bapt)

Finish converting the whole ports tree to USES=pkgconfig

Use USES=pathfix instead of gnomehack and add USE_PKGCONFIG=build [1].

Submitted by:	Joe Maloney <pkgdemonteam@gmail.com> [1]

* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
  are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
  in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
  eliminate pkg-config run dependency completely, a second phase is needed
  and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
  Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
  versions for some ports.
* Fix other ports so they build with the new glib version.

Thanks to miwi and crees for helping out with some exp-runs.
Approved by:	portmgr (miwi & bapt)
Obtained from:	gnome team repo

shared-mime-info currently registers in plist all auto-generated files (those
in share/mime/*/ directories), while only files in share/mime/packages/ should
be registered, and then update-mime-database should generate the others. The
same applies to many more ports, but that's not the point here. Anyway,
registering those files can create conflicts when another package updates the
definition of one of such auto-generated files. (written by avilla@)

-Minor correct grammar in COMMENT/pkg-descr.
-some clean up
-Bump the PORTREVISION.

PR:		ports/168220
Submitted by:	avilla

-Add a missing dependency. [1]
-Fix the plist. [2]
-Bump the PORTREVISION.

PR:             ports/168204 [1]
Reported by:    romain [1]
Submitted by:   fluffy [2]

- Update shared-mime-info to 1.0 release
- USE_XZ

PR:             ports/167867
Submitted by:   myself
Approved by:    mezz

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Mark MAKE_JOBS_UNSAFE.

Update to 0.90.

sort pkg-plist

PR:             ports/158902
Submitted by:   Jin-Sih Lin <linpct@gmail.com>

Fix a screw-up I introduced when I revved s-m-i a while ago.

Reported by:    kwm

Update to 0.80.

Bounce PORTREVISION for gettext-related ports.  Have fun, ya'll.

Update to 0.71.

Presenting GNOME 2.28.1 for FreeBSD.  The official release notes for this
release can be found at http://library.gnome.org/misc/release-notes/2.28/ .
Officially, this is mostly a polishing release in preparation for GNOME 3.0
due in about a year.

On the FreeBSD front, though, a lot went into this release.  Major thanks
goes to kwm and avl who did a lot of the porting work for this release.
In particular, kwm brought in Evolution MAPI support for better Microsoft
Exchange integration.  Avl made sure that the new gobject introspection
repository ports were nicely compartmentalized so that large dependencies
aren't brought in wholesale.

But, every GNOME team member (ahze, avl, bland, kwm, mezz, and myself)
contributed to this release.

Restore the %%MIMEDIRS%% to respect the paths, bump the PORTREVISION.

PR:             ports/134449
Submitted by:   Tim Bishop <tim@bishnet.net>

Update to 0.60.

Update shared-mime-info to 0.51, and remove conflicts with x11-fm/nautilus.
Add an UPDATING entry on how to properly perform this upgrade.

Update to 0.40.

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

Update to 0.30.

The FreeBSD GNOME team is proud to annunce the release of GNOME 2.22.0 for
FreeBSD.  The official GNOME 2.22 release notes can be found at
http://library.gnome.org/misc/release-notes/2.22/ .  On the FreeBSD front,
this release features an updated hal port with support for video4linux
devices, DRM (Direct Rendering), and better support of removable media.  Work
is also underway to tie webkit more closely into GNOME.  As part of the
GNOME 2.22 upgrade, GStreamer received a rather large upgrade as well.
Be sure to consult UPDATING on the proper steps to upgrade all of your
GNOME ports.

This release would not have been possible without the contributions and
testing efforts of the following people:

Pawel Worach
kan
edwin
Peter Ulrich Kruppa
J. W. Ballantine
Yasuda Keisuke
Andriy Gapon

Update WWW to: http://www.freedesktop.org/wiki/Software/shared-mime-info

Update to 0.23.

Presenting GNOME 2.20.1 and all related works for FreeBSD.  The official
GNOME 2.20 release notes can be found at
http://www.gnome.org/start/2.20/notes/en/ .  Beyond that, this update
includes the new GIMP 2.4 (courtesy of ahze).

The GNOME 2.20 update also includes a huge change in the FreeBSD GNOME
hierarchy.  We are now using the more standard DATADIR of ${PREFIX}/share
rather than ${PREFIX}/share/gnome. The result is that fewer patches and
hacks are needed to port GNOME components to FreeBSD.  This will mean some
user changes may be required, so be sure to read /usr/ports/UPDATING for
more details.

This release and the things we accomplished in it would not have been
possible without mezz's crazy idea to collapse DATADIR, and his persistence
to make it happen successfully.  Ahze and pav also deserve thanks for

Update to 0.22.

- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
  supports them.  This is determined by running ``configure --help'' in
  do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
  which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
  Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
  PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
  subdirectory detection.

PR:             ports/111470
Approved by:    portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by:      pointyhat exp run

Remove X11BASE stuff from plist, they are no longer need.

Reviewed by:    marcus

Remove support for a separate X11BASE.

Approved by:    portmgr (implicit)

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

Restore a hunk that was accidentally removed with the MIMEDIRS fix.

Submitted by:   roam

Correct MIME dirs in patch.

Update to 0.21.

Update to 0.20.

Update to 0.19.

Update to 0.18.

Remove USE_REINPLACE from ports starting with M

Update the MASTER_SITES to fix the fetch.

Reported by:    krismail

Clean up leftover mime.cache files, and add another MIME subdirectory.

Update to 0.17.

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256 checksums

Bump PORTREVISION to chase the glib20 shared library update.

- Update to 0.16

* Sync with Freedesktop CVS to add support for a few new MIME types including
  D source code, CHM files, Stuffit archives, and Oasis documents
* Add support for aliases and subtypes, new to the MIME spec

Obtained from:  Freedesktop CVS

Bump PORTREVISION to chase the glib20 shared lib version change.

Be sure to create all of the X11BASE MIME subdirectories since we will
be responsible for removing them.

Approved by:    portmgr (implicit)

- Create an empty database in X11BASE

  This is not strictly needed, and it violates a "stay in prefix" rule,
  but it's necessary to avoid pointyhat from reporting leftover files
  in ports which actually do create mime database in X11BASE, for example,
  comms/xlog.

- Change @cwd+%D to %%X11BASE%%, there are no files listed after @cwd anymore.

- Silence unexec lines

Make sure update-mime-database is run during package installation as well.

Reported by:    GNOME Tinderbox

Don't statically add dynamically generated files to the plist.  Instead,
just remove them if they exist during deinstall.  This should fix
the packaging problems.

Fix the pkg-plist for X11BASE stuff.

Reported by:    pointyhat via kris

Fix a potential overflow leading to incorrect MIME detection on 64-bit
and bigendian platforms.  See

https://bugs.freedesktop.org/show_bug.cgi?id=1506
https://bugs.freedesktop.org/show_bug.cgi?id=1507

For more details.

Reported by:    Sean McNeil <sean@mcneil.com>
Obtained from:  FreeDesktop CVS

Update WWW: line

Add a temporary mirror until fd.o gets their act together.

Update to 0.15.

Sync the MIME search directories from gnome-vfs.  This fixes some
prioritization issues with custom MIME types.

Add support for a mime database in ${X11BASE} as well as ${LOCALBASE}.

Requested by:   pav

Bump PORTREVISION for the NULL pointer check.