===> The following configuration options are available for libvirt-glib-5.0.0_1:
DOCS=on: Build and/or install documentation
VAPI=on: Build VALA API files
===> Use 'make config' to modify these settings
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above )
textproc/libxml2: bump all LIB_DEPENDS consumers
This is a separate commit to facilitate easier cherry-picking for
quarterly.
PR: 262853, 262940, 262877, 263126
Approved by: fluffy (mentor)
textproc/libxml2: bump all dependencies
This should make sure that all dependent ports will pick
up the new version commited with a13ec21cd733f67a9fc0dc00ab45268bdc236246
devel/libvirt-glib: update to 4.0.0
- Switch to meson,
- Add DOCS option (enabled by default) to build gtk-doc documentation,
- Enable VALA option by default.
devel/libvirt-glib: update to 1.0.0
- update to 1.0.0
- add an option for vala bindings: VALA, disabled by default
- add an explicit libxml2 dependency
Split devel/gettext in devel/gettext-runtime and devel/gettext-tools. The
first contains runtime libraries such as libintl and the latter contains
developer tools such as msgfmt. Ports that use gettext will usually need
a LIB_DEPENDS on gettext-runtime and a BUILD_DEPENDS on gettext-tools.
USES=gettext-runtime can be used to set a LIB/BUILD/RUN_DEPENDS on
devel/gettext-runtime and USES=gettext-tools can be used to set a
BUILD/RUN_DEPENDS on devel/gettext-tools. USES=gettext is now the same
as "USES=gettext-runtime gettext-tools" meaning a LIB_DEPENDS on
devel/gettext-runtime and a BUILD_DEPENDS on devel/gettext-tools.
Update gettext to 0.19.3.
Remove :oldver from converters/libiconv and devel/gettext-runtime. Leave
symlinks with the old library versions to avoid the need to bump
PORTREVISION on a large number of dependent ports. When most of the
dependent ports have had normal version updates, PORTREVISION can be
bumped on the remaining ones (low number) and the links can be removed.
Fix some ports that installed files in lib/locale instead of share/locale.
PR: 194038
Reviewed by: bapt
Exp-run: antoine
Approved by: portmgr (antoine)
- update libvirt,py-libvirt,libvirt-glib to 0.1.9
- shift var from ${PREFIX} to /var
- bump shared libs of dep. port
PR: 192441 (based on)
Submitted by: olevole@olevole.ru
- Set CPPFLAGS and LIBS in a number of ports so configure can find libintl.h
and libintl.so. This fixes a problem where DATADIRNAME gets an incorrect
value which causes locale files to be installed in the wrong place.
- The only configure checks that still need to be patched are related
to intltool so move DATADIRNAME patching from USES=pathfix to
USE_GNOME=intlhack.
- games/klavaro: remove excessive dependencies
- japanese/libskk: add INSTALL_TARGET=install-strip
- math/libqalculate: add INSTALL_TARGET=install-strip and remove pthread
patching
- multimedia/freetuxtv: remove excessive dependencies
- science/gramps: fix shared-mime-info use
Exp-run by: antoine
Approved by: portmgr (antoine)
security/libssh2:
- Convert to USES=libtool and USES=pathfix
- Add INSTALL_TARGET=install-strip
- Only depend on openssl if GCRYPT option is off
- Sanitize libssh2.pc
devel/libvirt:
- Remove workaround for broken libssh2.pc
- Add USES=libtool and bump dependent ports
- Convert to INSTALL_TARGET=install-strip
devel/libvirt-glib:
- Convert to USES=libtool
Approved by: portmgr (implicit, bump unstaged port)
- update libvirt to 1.2.2
- fix qemu when not enabled, and disable linux containers [1]
- update libvirt-glib to 0.1.8
Changes: http://libvirt.org/news.html
Submitted by: roman@ [1]
- update to 1.2.0 and bump shared libraries in respective ports
- while here shift new lib_depends format where needed
Changes: http://libvirt.org/news.html
- update to 1.1.0 and bump shared libraries in respective ports
- while here:
- fix option check in sysutils/cfengine34
- move devel/libvirt-glib to use glib20 in favor of gio-fam-backend (suggested
by kwm@)
- restore ABI version in net-mgmt/collectd5
