===> The following configuration options are available for py27-qt4-core-4.12.1_8,1:
API=on: Install QtCore API for QScintilla2
DEBUG=off: Build with debugging support
===> Use 'make config' to modify these settings
Qt4 deprecation: Remove Qt4 and its consumes.
2019-03-15 accessibility/qt4-accessible: Qt4 has been EOL since december 2015
2019-03-15 astro/qlandkartegt: Qt4 has been EOL since december 2015
2019-03-15 astro/stellarium-qt4: Qt4 has been EOL since december 2015
2019-03-15 astro/xglobe: Qt4 has been EOL since december 2015
2019-03-15 audio/acoustid-fingerprinter: Qt4 has been EOL since december 2015
2019-03-15 audio/cueplayer: Qt4 has been EOL since december 2015
2019-03-15 audio/esperanza: Qt4 has been EOL since december 2015
2019-03-15 audio/lastfm-desktop: Qt4 has been EOL since december 2015
2019-03-15 audio/minitunes: Qt4 has been EOL since december 2015
2019-03-15 audio/mixxx20: Qt4 has been EOL since december 2015
2019-03-15 audio/mumble: Qt4 has been EOL since december 2015
2019-03-15 audio/murmur: Qt4 has been EOL since december 2015
2019-03-15 audio/puddletag: Qt4 has been EOL since december 2015
(Only the first 15 lines of the commit message are shown above )
Mark QT4 ports/functionality for removal on 2019-03-15
While here, chase some KDE4 ports and functionality, these are scheduled for
removal on 2018-12-31. Change the default option/flavor to QT5 where applicable
or use alternative toolkits like GTK.
Submitted by: tcberner
Reviewed by: adridg, jhale, rene, tcberner
Approved by: portmgr (implicit, flavor hook)
Differential Revision: https://reviews.freebsd.org/D17741
pyqt: Change install directories for Python flavor support
* PyQt could not be installed for multiple Python versions at
the same time, as there were conflicting files.
This patch creates Python-version versioned directories for
all these, and further installs binaries with a version number.
* Note, there might be some hickups for software that depends on
on of the .so's provided by PyQt5, which might not be found
anymore autmotically, and maybe need some LD-flaggery.
* Update PyQt5 to 5.10.1
* Mark www/py-qt5-webengine broken. It is unforuntately no longer
compatible with the old qt5-webengine-5.9.4 we ship.
PR: 232745
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D8714
Replace bsd.qt.mk by Uses/qt.mk and Uses/qt-dist.mk
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: -https://reviews.freebsd.org/D15540
Update QScintilla 2.10.2.
Upstream has renamed its libraries and we no longer need to patch
devel/qscintilla-qt5 to create a library whose name does not conflict with
devel/qscintilla's. However, the library names are different so we need to bump
PORTREVISION in several ports (the SOVERSION has changed too).
Thanks to antoine for the exp-run.
PR: 225928
Update SIP to 4.19.6, PyQt4 to 4.12.1 and PyQt5 to 5.9.2.
Upstream no longer ships the contents of misc/py-qt5-doc, so the port has been
removed.
This is also a requirement for updating the Qt5 ports, as the PyQt5 version
currently in the tree has license conflicts with later Qt versions.
Big thanks to tcberner for doing most of the work here, and antoine for the
exp-run.
PR: 224739
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
devel/py-qt4-core: change USE_PYQT from sip_build to sip to fix build
for those ports, unbreak:
science/veusz
math/qtiplot
emulators/swine
devel/ninja-ide
PR: 210045
Reported by: antoine
Submitted by: Tobias C.Berner <tcberner@gmail.com> (kde)
devel/py-qt4-core cleanups in py-qt4-*
- Cleanup work on the py-qt4 ports, leading to a reduced runtime footprint.
PR: 209283
Submitted by: groot@kde.org (kde), rakuco
PyQt: Replace bsd.pyqt.mk with Uses/pyqt.mk.
In preparation for landing PyQt5 ports, generalize devel/py-qt4's
bsd.pyqt.mk and make it a proper file in Uses/.
Ports wishing to depend on PyQt4 ports can now do the following:
USES= pyqt:4
USE_PYQT= foo bar_build baz_run
Other changes include the renaming of the PYQT4_DIST variable to PYQT_DIST
and the introduction of the PYQT_SIPDIR plist substitution variable. The
rest of the contents of Uses/pyqt.mk are pretty much identical to what we
had in bsd.pyqt.mk with additional processing of USE_PYQT.
Even though this patch touches files in many different ports, the goal is
(Only the first 15 lines of the commit message are shown above )
Update PyQt and its dependencies.
* PyQt4 has been updated to 4.11.3.
* QScintilla has been updated to 2.8.4.
* SIP has been updated to 4.16.5.
This update is much smaller than the previous one, as there has been no
further need for clean ups in the ports infrastructure.
Pretty much the entire patch set has been originally contributed by Tobias
Berner, who sent it to the KDE on FreeBSD mailing list. Thanks a lot!
PR: 198016
Submitted by: Tobias Berner <tcberner@gmail.com>
Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.
Part II, Bump PORTREVISIONs.
PR: 192025
Tested by: antoine (-exp runs)
Approved by: portmgr (implicit)
Update PyQt to 4.11.1, QScintilla to 2.8.3 and SIP to 4.16.2.
... And bump PORTREVISION on ports that depend on devel/qscintilla2 due to
the shlib version change.
This is brought to you by the KDE on FreeBSD team. Besides updating to newer
upstream releases, this commit also contains a lot of under-the-hood changes
to the PyQt/QScintilla/SIP ports. Their Makefiles had accumulated a lot of
cruft over time, so it was time for some summer cleaning:
- General, belated changes:
* Use OPTIONS helpers wherever possible, stop including
<bsd.port.options.mk> when not necessary, stop checking for
${PORT_OPTIONS:MDOCS} and ${PORT_OPTIONS:MEXAMPLES} when not necessary,
add options such as DOCS and/or DEBUG where they were only checked for.
(Only the first 15 lines of the commit message are shown above )
Build with Python 3 as well.
Instead of forcefully removing the pyuic/uic/port_v3/ directory, which in
effect prevents the port from building with Python 3, check for the major
Python version being used and selectively remove either port_v2/ or
port_v3/.
Additionally, set PYTHON_PY3K_PLIST_HACK, since PyQt does not use either
distutils or setuptools, and Python >= 3.2 store .pyc/.pyo files in a
different directory.
PR: 180467
Submitted by: nwhitehorn@ (original version)
MFH: 2014Q2
- Rebase patch-configure.py on top of the current PyQt version, to make it
easy to change it, which leads us to...
- Build pylupdate and pyrcc only for py-qt4-xml again.
This fixes a regression introduced last year when PyQt was updated to
4.10.3: configure.py started building pylupdate and pyrcc unconditionally
instead of only if "QtXml" was specified.
If the API option is off, the build would fail because the QtXml headers
needed to build those tools would not be added as a dependency.
PR: 183706
MFH: 2014Q2
Fix the multimedia/py-qt4-phonon build with multimedia/phonon 4.7.0.
Change the configure.py so that the Phonon test program uses a different
Phonon header, as upstream commit b51f5bf2 changed the QWidget include in a
way that breaks PyQt's detection, and PyQt refuses to support KDE's Phonon
for some reason and is thus unwilling to fix its configuration program.
See https://bugs.kde.org/show_bug.cgi?id=306261 for more information.
Update SIP to 4.15.2 and PyQt to 4.10.3.
This commit also adds proper staging support to all the ports being updated.
In collaboration with Schaich Alonso <alonsoschaich@fastmail.fm> and
Tomasz Kowalczyk <kowalczfbsd@gmail.com>.
KDE/FreeBSD team presents:
SIP 4.14.3
QScintilla 2.7
PyQt 4.9.6
The area51 repository features commits by jhale and myself.
Changes:
- Trim Makefile header
- Convert to new option framework
Merge changes from area51 repository (SVN commit 8197 by avilla):
- Remove SIPFILES option, some ports (e.g., pykde4) require the files
to be installed.
- Remove DEBUG and TRACING options, and merge them under WITH_DEBUG.
- Pet Tinderbox and friends.
OPTIONSFILE must be set using ?= to allow overriding.
PR: 163743
PR: 163744
PR: 163745
PR: 163746
Submitted by: A.J. Kehoe IV (Nanoman) <vOo4vyPj@nanoman.ca>
KDE FreeBSD team is glad to present Qt 4.7.1 in ports.
Along with Qt4 the following ports are updated:
PyQt4 ports to 4.8.1
devel/py-sip to 4.11.2
devel/qscintilla2 to 2.4.5
PyKDE3 to 3.16.7
PyQt3 tp 3.18.2-snapshot-20091119
New ports added:
devel/qt4-declarative
devel/py-qt4-declarative
x11/qt4-graphicssystems-opengl
This release has been contributed by:
Thomas Abthorpe (tabthorpe)
Max Brazhnikov (makc)
Dima Panov (fluffy)
Alberto Villa (avilla)
We'd like to thank Martin Wilke (miwi) for exp-run.
The KDE FreeBSD team is proud to announce the release of SIP-4.10 and
PyQt-4.7 for FreeBSD. The official update notes can be found at
http://www.riverbankcomputing.com
We'd like to say thanks to all helpers, testers and submitters.
- Update py-qt4* to 4.6.2
- Update py-sip to 4.9.3
The KDE FreeBSD team would like to say thanks to all the helpers
and submitters.
Tested by: pointyhat-exp-run (myself)
- Update py-qt4 to py-qt4.5.4
- Update qscintilla-2* to 2.4
- Update py-sip to 4.8.2
- Update py-kde to 1.16.3
- Update py-qt to 1.18.1
The KDE FreeBSD team would like to say thanks to all the helpers
and submitters
New Port:
devel/py-qt4-scripttools
Update PyQt4 ports to 4.4.4, new ports:
devel/py-qt4-help
multimedia/py-qt4-phonon
textproc/py-qt4-xmlpatterns
www/py-qt4-webkit
Update QScintilla2 to 2.3.2, PyQt3 to 3.17.6, PyKDE3 to 3.16.2.
Pass maintainership to kde@FreeBSD.org. Thanks Danny Ricin for his great work.
PR: based on ports/130219
Submitted by: Dima Panov" <fluffy at fluffy.khv.ru>
The first iteration of the py-qt4-* ports had a snapshot date as its
PORTVERSION. After that the PORTVERSION became 4.foo. Because this is
numerically lower than before, the PORTEPOCH should have been bumped.
Poked by: kris@
PR: 125814
Submitted by: Danny Pansters <danny@ricin.com> (maintainer)
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Update to 4.3.3
- Configure.py now has a flag to specify component, patch is now simpler
- Update qscintilla2 so version where used
- Use bsd.pyqt.mk
Submitted by: Danny Pansters <danny@ricin.com> (maintainer via private mail)
PyQt4 is a set of Python bindings for Trolltech's Qt4 application framework.
This package provides the QtCore module.
WWW: http://www.riverbankcomputing.co.uk/pyqt/
PR: ports/109619
Submitted by: Danny Pansters <danny at ricin.com>
