math/maxima: fix help

PR:		234842
Submitted by:	Lorenzo Salvadore <phascolarctos@protonmail.ch> (maintainer)
Reported by:	jszhao@yeah.net

math/maxima: Update to 5.42.1, cleanup

While here, give maintainership to submitter

PR:		232118
Submitted by:	Lorenzo Salvadore <phascolarctos@protonmail.ch>

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Remove compatibility code for FreeBSD < 11.2 from all ports.

Simplify some ports where DragonFlyBSD no longer needs to be special-cased.
Submitted by:	rene
Reviewed by:	bapt, jbeich
Differential Revision:	https://reviews.freebsd.org/D17724

Remove CLISP option, lang/clisp was removed in 2014

math/maxima: remove expired lang/gcl variant

- Update to 5.41.0 [1]
- Add LICENSE_FILE
- Whitespace fixes
- Switch to new test framework

PR:		223316 [1]
Submitted by:	satosi.kimura@nifty.ne.jp [1]

Convert USES of tcl or tk from 84+ to 85+

This shouldn't change anything in the default case because tcl86 is chosen
anyway.

math/maxima: Update to 5.40.0

PR:		221179
Submitted by:	satosi.kimura@nifty.ne.jp

- Always check OPSYS along with OSVERSION

- Update to 5.39.0

PR:		216838
Submitted by:	yuri@rawbw.com

- Update to 5.38.1

PR:		212827
Submitted by:	satosi.kimura@nifty.ne.jp

Reset ports maintained by bf@ until he has time again to work on them.

PR:		210474
Submitted by:	jbeich
With hat:	portmgr-secretary

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Don't package ${LOCALBASE}/info/dir

- Update to 5.37.3

PR:		204939
Submitted by:	mike.d.ft402@gmail.com
Approved by:	maintainer(timeout, >40 days)

math/maxima: remove bash dependency

- Maintainer's timeout (bf@FreeBSD.org)

PR:		193950
Submitted by:	Jan Kokemuller <jan.kokemueller@gmail.com>

Cleanup plist

- Convert ports of math/ to new USES=python

Approved by:	portmgr (implicit)

Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)

Use staging

Reset maintainership for ports not staged with no pending PR

With hat:	portmgr

Allow to build with texinfo from ports

With hat:	portmgr

Update to 5.31.3

Update lang/sbcl to 1.1.12 [1] and math/maxima to 5.31.1; adjust
dependent ports

PR:		181545 [1]

Add NO_STAGE all over the place in preparation for the staging support (cat:
math)

Removed leftovers USE_GMAKE

Reported by:	az

Convert to new perl framework
Convert USE_GMAKE to USES

update lang/sbcl to 1.1.8, and adjust dependent ports

update lang/sbcl to 1.1.7, and adjust dependent ports

update to 5.30.0

Feature safe:	yes

update lang/sbcl to 1.1.5+bugfixes, and adjust dependent ports

update lang/sbcl to 1.1.4 and adjust dependent ports

update lang/sbcl to 1.1.3 and adjust dependent ports

update sbcl to 1.1.2 and maxima to 5.29.1; adjust dependent ports

update to 5.28.0

update lang/sbcl to 1.0.58 and switch to the new options format;
adjust dependent ports

- update png to 1.5.10

- Convert to new option frame (mutualty exclusive options aka single)
- Should fix make index

With hat:       portmgr

update lang/sbcl to 1.0.57, and adjust dependent ports

update math/maxima to 5.27.0, and adjust a dependent port

update lang/sbcl to 1.0.55, and adjust dependent ports

update to 5.26.0; replace some non-standard GNU extensions in sed(1)
calls in the Makefiles and scripts, which were corrupting some of the
html documents (reported by M. Talon)

update lang/sbcl to 1.0.54, and adjust dependent ports (this allows sbcl to
be build WITH_THREADS on recent versions of FreeBSD once again) [1]; rename
*.core files in sbcl and math/maxima so that they are not removed by
disk-cleaning scripts [2]; make it possible to use the makesum target in sbcl
WITH_SBCL; fix maxima build WITH_CMUCL, and place a default memory cap of
1GiB on amd64; reduce default output from a few targets in maxima, and defer
patch cleaning to the pre-build target to make debugging easier

PR:             162017 [1], 162680 [2]
Approved by:    pav (portmgr)
Feature safe:   yes

update lang/sbcl to 1.0.53, and adjust dependent ports

PR:             161444
Submitted by:   olgeni (earlier version)
Approved by:    miwi (portmgr)
Feature safe:   yes

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

update to 5.25.1

update to 5.25.0

Add a note about the new memory limit

- Update to 5.24.0
- Allow for a limit on memory use [1]

PR:             154899 [1]
Submitted by:   Denny Lin (different patch) [1]

Update to 5.23.2

Approved by:    makc, miwi (mentors, implicit)
Feature safe:   yes

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

- Bump Maxima revision after lang/sbcl update.

Round one migration of ports from automake{19,110} to automake111

Bump portrevision. A rebuild is needed after rebuilding lang/sbcl,
even if the sbcl version did not change in the end.

Submitted by:   Jan Henrik Sylvester <me janh de>

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Update to 5.22.1

Approved by:    miwi (co-mentor)

Add lisp to CATEGORIES

Approved by:    makc (co-mentor)

-Update to 5.22.0
-Fix a localization problem [1]
-Temporarily rename regression-test target to prevent tinderbox
errors WITH_SBCL
(See http://www.math.utexas.edu/pipermail/maxima/2010/022185.html )

PR:             147861 [1]
Submitted by:   Kuan-Chung Chiu <buganini@gmail.com> [1]
Approved by:    makc (co-mentor)

Change my ports to use my FreeBSD.org email address.

- Update to 5.21.1

PR:             ports/146168
Submitted by:   bf <bf1783@gmail.com> (maintainer)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

- Bump maxima portrevision as lang/sbcl has been updated.

Update to 5.20.1

PR:             ports/141455
Submitted by:   maintainer

- Bump PORTREVISION to reflect the lang/sbcl update.

- Update to 5.19.2

PR:             138494
Submitted by:   bf <bf1783@gmail.com> (maintainer)

- Remove remaining SFP references (switch these ports to SF)

Approved by:    portmgr (pav)

- Update to 5.19.1
- Switch to SFP

PR:             137863
Submitted by:   bf <bf1783@gmail.com> (maintainer)

Update to 5.19.0

PR:             ports/137613
Submitted by:   bf <bf1783 at gmail.com> (maintainer)

- Chase lang/sbcl update.

- Update maintainer mail adresse

Submitted by:   "b. f." <bf1783@gmail.com> (maintainer via private mail)

- Bump maxima portrevision due to lang/sbcl update.

- Update to 5.18.1

PR:             134012
Submitted by:   bf <bf2006a@yahoo.com> (maintainer)

- Bump revision because of lang/sbcl update.

- Change default Tcl/Tk version to 8.5
- Bump PORTVERSION of ports affected

Tested by:      pointyhat (pav)

- Bump maxima's PORTREVISION after lang/sbcl update.

- Update to 5.17.1

PR:             ports/131105
Submitted by:   bf <bf2006a@yahoo.com> (maintainer)

- Update to 5.17.0

PR:             129505
Submitted by:   bf <bf2006a@yahoo.com> (maintainer)

- Bump portrevision because of sbcl update.

- Bump up the maxima PORTREVISION because of lang/sbcl update.

- Bump revision because of lang/sbcl update.

- Bump up portrevision because of lang/sbcl update.

- Update to 5.16.3
- Pass maintainership to submitter

PR:             ports/126995
Submitted by:   bf <bf2006a at yahoo.com>

Reset sf@slappy.org due to maintainer-timeouts and no response to email.

Hat:    portmgr

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- Bump PORTREVISION to force rebuild after the lang/sbcl update.

- Bump PORTREVISION to reflect the lang/sbcl update.

- Update to 5.15.0
- This port respects CC now, so no need to use MAKE_ENV nowadays

PR:             ports/123328
Submitted by:   bf <bf2006a at yahoo.com>
Approved by:    maintainer timeout (6 weeks)

Bump portrevision due to upgrade of devel/gettext.

The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).

PR:             ports/124340
Submitted by:   edwin@
Approved by:    portmgr (pav)

- Bump portrevision as SBCL version was updated.

Reported by:    Jan Henrik Sylvester <me@janh.de>

- Use USE_TK and add tk to category

PR:             ports/122220
Submitted by:   bf <bf2006a at yahoo.com>
Approved by:    maintainer timeout (3 weeks)

- Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
        Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
        ehaupt, nox, itetcu, flz, pav

PR:             116263
Tested on:      pointyhat
Approved by:    portmgr (pav)

- Update to 5.14.0

PR:             ports/120531
Submitted by:   Yoshiaki Uchikawa <yoshiaki at north.bokutou.jp>
Approved by:    maintainer timeout (1 month)

Switch autoconf dependencies from 2.53 or 2.59 to 2.61.

PR:             ports/116639
Submitted by:   aDe

- Update to 5.13.0

PR:             115827
Submitted by:   bf <bf2006a@yahoo.com>
Approved by:    maintainer timeout

- Convert to OPTIONS framework

PR:             ports/114109
Submitted by:   Scott Flatman <sf at slappy.org> (maintainer)

- Fix build

PR:             ports/113976
Submitted by:   Scott Flatman <sf@slappy.org> (maintainer)

- Mark BROKEN on amd64

PR:             ports/113665
Submitted by:   Scott Flatman <sf@slappy.org> (maintainer)