pyOBD (aka pyOBD-II or pyOBD2) is an OBD-II compliant car diagnostic tool.
It is designed to interface with low-cost ELM 32x OBD-II diagnostic interfaces
such as ELM-USB. It will basically allow you to talk to your car's ECU, ...
display fault codes, display measured values, read status tests, etc. All cars
made since 1996 (in the US) or 2001 (in the EU) must be OBD-II compliant, i.e.
they should work with pyOBD.
pyOBD is written entirely in Python and was originally written by Donour
Sizemore, now maintained and improved by SECONS Ltd. and it is Free Software
and is distributed under the terms of the GPL.
You installed pyOBD: OBD-II compliant car diagnostic tool.
pyOBD expects the device /dev/ttyU0 that should be created when you
connect the OBD-II cable.
You need these lines in /etc/devfs.rules to make the device readable
and writable by you. If your user is in the group users:
[localrules=5]
add path 'ttyU*' mode 0660 group users
You also need this line in /etc/rc.conf to allow localrules to take effect:
devfs_system_ruleset="localrules"
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
framework: Add new USES 'magick' for graphics/ImageMagick*
A new USES has been added to depend on ImageMagick.
USES=magick
adds a LIB_DEPENDS on graphics/ImageMagick${IMAGEMAGICK_DEFAULT}.
If a specific version is required, use for example
USES=magick:6 resp. USES=magick:7
If only a build, run or test is required, use for example
USES=magick:build resp. USES=magick:6,build,test
(Only the first 15 lines of the commit message are shown above )
INSTALLS_ICONS: retire the macro and rework the related dependencies
While here, make sure gtk-update-icon-cache is only on run dependency
where added as a dependency
Enforce gtk3 to depend on gtk-update-icon-cache (previously it was
inheriting the dependency)
Move comms/py-serial to comms/py-pyserial
- While I'm here, add NO_ARCH
- Bump PORTREVISION of dependent ports for dependency change
(devel/py-pyvisa-py and finance/odoo will be bumped in next commit, py-pyusb
renaming)
PR: 246546
Submitted by: sunpoet (myself)
Approved by: maintainer (timeout, 40 days)
x11-toolkits/py-wxPython40: GUI toolkit for the Python programming language
py-wxPython40 aka Phoenix is a reborn of wxPython and in particular it allows to
use wxWidgets with Python3.
- Add x11-toolkits/py-wxPython40
- Replace wxPython30 by wxPython40 when python wxWidgets is required
- Fix cad/kicad and cad/kicad-devel to use wxPython40 "Phoenix"
- Update comms/congruity, graphics/py-mayavi from wx 2.8 to 3.0
- While I'm here fix portlint per emulators/playonbsd
- Remove RUN_DEPENDS from USE_WX per graphics/djvusmooth
- Bump portversion
- Fix unicode on x11-toolkits/wxgtk30 and take Maintainer'ship
PR: 241893
Reviewed by: koobs, tcberner
Approved by: tcberner (mentor)
Differential Revision: https://reviews.freebsd.org/D21915
Exp-run by: antoine
Update ImageMagick to 6.9.10.14 [1]
* Add PKGNAMESUFFIX and rename the directory. This was done to show
that IM6 is not the "main" version. But still fully supported by upstream.
* Convert a number of options to optionhelpers.
* Add option for ISO/IEC 23008-12:2017 HEIF suport
* Add comment to pkg-descr explaining IM6's "legacy" tag.
* Add comment to the patch-config_policy.xml file why it still needed.
Please note that IM7 is not a drop in replacement due to library API and
command arguments changes. And as a result ports need to decide for themself
which version to use.
Chase these changes in all the ports that using IM6.
PR: 225102 (based on, only the version update) [1]
Submitted by: Pascal Christen <pascal.christen@hostpoint.ch>
