23:29 miwi 

Provides a method for storing bookmarks for URIs
in ZConf.

WWW: http://search.cpan.org/dist/ZConf-Bookmarks/

Submitted by:   Zane C, Bowers <vvelox at vvelox.net>

06:57 miwi 

This program produces numerous reports from OpenLDAP 2.1, 2.2, 2.3 and 2.4
slapd logfiles to allow OpenLDAP administrator to analyze server's performance.

WWW: http://prefetch.net/code/index.html

PR:             ports/139474
Submitted by:   Alexey V. Degtyarev <alexey at renatasystems.org>

14:31 kuriyama 

A co-operative multithreaded server using Coro.

WWW: http://search.cpan.org/dist/Net-Server-Coro/

12:37 miwi 

Wowza Media Server Pro is a high-performance, extensible and a fully
interactive Flash media server for live and on-demand streaming,
chat, recording and much more.

Wowza Pro lets you take Flash streaming to new heights with its full
set of features and exclusive capabilities like Wowza's H.264/HE-AAC
ive streaming with non-Flash RTSP/RTP and MPEG-TS encoders.

WWW: http://www.wowzamedia.com/

PR:             ports/139410
Submitted by:   meritus at innervision.pl

07:08 wen 

Net::LDAP::Server provides the protocol handling for an LDAP
server. You can subclass it and implement the methods you need
(see below). Then you just instantiate your subclass and call
its handle method to establish a connection with the client.

WWW: http://search.cpan.org/dist/Net-LDAP-Server/

Approved by:    miwi(mentor)

12:31 edwin 

Welcome net/tcpdump398.

This port is specially for all the people on FreeBSD 8.0 who prefer
the output of the FreeBSD 7.x tcpdump above the new tcpdump.

15:52 bland 

Add net/opal3, VoIP abstraction library v3.

PR:             138718
Feature safe:   yes

12:51 wen 

Net_IPv4 is a Class used for calculating IPv4(AF_INET family)
address information such as network as network address,
broadcast address, and IP address validity.

WWW: http://pear.php.net/package/Net_IPv4/

Approved by:    miwi(mentor)
Feature safe:   yes

22:29 pav 

Callweaver (formely OpenPBX.org) is an open-source multi-platform PBX project.
It is based on Asterisk 1.2 code. Callweaver supports analog and digital
PSTN telephony, IAX/SIP and offers mature T.38 support.

WWW: http://www.callweaver.org

PR:             ports/136133
Submitted by:   Alexander V. Chernikov <melifaro@ipfw.ru>
Feature safe:   yes

12:59 miwi 

2009-09-09 devel/p5-Algorithm-MDiff: the module was removed from CPAN
2009-09-09 devel/p5-Data-Postponed: the module was removed from CPAN
2009-09-08 net/asterisk12-addons: does not build

Feature safe: yes

04:40 yzlin 

Add libnatpmp 20090713, an NAT-PMP lightweight library.

PR:             ports/137676
Submitted by:   Hung-Yi Chen <gaod at hychen.org>
Approved by:    rafan (co-mentor)

22:41 miwi 

FreeSwitch Voip SoftSwitch & OpenSource PBX

WWW: http://www.freeswitch.org/

PR:             ports/137891
Submitted by:   Richard Neese <r.neese at gmail.com>

21:33 timur 

Forgot to add net/nss_ldapd

14:55 dinoex 

Python module for miniupnpc

The usage of the miniUPnP client library is useful whenever an application
needs to listen for incoming connections.
Examples : P2P applications, FTP clients for active mode, IRC (for DCC)
or IM applications, network games, any server.

WWW: http://miniupnp.free.fr/
PR:             137612
Submitted by:   Anonymous

16:34 erwin 

net/ppptraf: "author has abandoned this program"

12:25 miwi 

Google::SAML::Request will parse (and, for the sake of completeness,
create) SAML requests as used by Google. Please note that
Google::SAML::Request is by no means a full implementation of the SAML
2.0 standard. But if you want to talk to Google to authenticate users,
you should be fine.

WWW:    http://search.cpan.org/dist/Google-SAML-Request/

PR:             ports/137444
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

12:24 miwi 

Google::SAML::Response can be used to generate a signed XML document
that is needed for logging your users into Google using SSO.

You have some sort of web application that can identify and
authenticate users. You want users to be able to use some sort of
Google service such as Google mail.

When using SSO with your Google partner account, your users will send
a request to a Google URL. If the user isn't already logged in to
Google, Google will redirect him to a URL that you can define. Behind
this URL, you need to have a script that authenticates users in your
original framework and generates a SAML response for Google that you
send back to the user whose browser will then submit it back to
Google. If everything works, users will then be logged into their
Google account and they don't even have to know their usernames or
passwords.

WWW:    http://search.cpan.org/dist/Google-SAML-Response/

PR:             ports/137445
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

12:19 lippe 

This module provides a perl interface to the Twitter APIs. It uses the
same API definitions as Net::Twitter, but without the extra bells and
whistles and without the additional dependencies. Same great taste,
less filling.

This module is related to, but is not part of the "Net::Twitter"
distribution. It's API methods and API method documentation are
generated from "Net::Twitter"'s internals. It exists for those who
cannot, or prefer not to install Moose and its dependencies.

WWW: http://search.cpan.org/dist/Net-Twitter-Lite/

14:12 miwi 

Getting network addresses from Python

It.s been irritating me for ages that it isn.t possible to
straightforwardly get the network address(es) of the machine
you.re running on from a Python program.

WWW:    http://alastairs-place.net/netifaces/

PR:             ports/137236
Submitted by:   Stanislav Svirid <count at 211.ru>

13:17 miwi 

opentracker is a open and free bittorrent tracker project.
It aims for minimal resource usage and is intended to run
at your wlan router. Currently it is deployed as an open and
free tracker instance.

WWW: http://erdgeist.org/arts/software/opentracker/

PR:             ports/137130
Submitted by:   utisoft at gmail.com

18:49 amdmi3 

Dbeacon is a distributed multicast monitoring tool.  The main purpose of a
beacon is to monitor other beacons' reachability and to collect statistics
such as loss, delay, and jitter between beacons.  Dbeacon supports both
IPv4 and IPv6 multicast and supports collecting information using both Any
Source Multicast (ASM) and Source-Specific Multicast (SSM).

WWW: http://fivebits.net/proj/dbeacon

PR:             136916
Submitted by:   Antonio Querubin <tony@lava.net>

11:15 miwi 

Event::tcp is a bunch of glue code to make it very easy to build
client-server style TCP-based services.

WWW:    http://search.cpan.org/dist/Event-tcp/

Submitted by:   Frank Steinborn

21:44 miwi 

This module provides an interface the to Cassandra distributed
database. It uses the Thrift interface. This is changing rapidly and
supports the development version of Cassandra built from Subversion
trunk.

WWW:    http://search.cpan.org/dist/Net-Cassandra/

PR:             ports/136780
Submitted by:   Gea-Suan Lin <gslin at gslin.org>

21:25 kmoore 

PC-BSD Networking Utilities

Includes GUI's for setting up and managing ethernet and wireless devices.

WWW: http://www.pcbsd.org/

Approved by:    miwi (mentor)

07:41 miwi 

Net::Rendezvous::Publish - publish Rendezvous services

WWW:    http://search.cpan.org/dist/Net-Rendezvous-Publish/

PR:             ports/136690
Submitted by:   TERAMOTO Masahiro <markun at onohara.to>

19:41 timur 

Add samba4-devel port.

13:13 dhn 

Rubytter is simple twitter library. Supports OAuth
and Implemented with API methods.

WWW:    http://github.com/jugyo/rubytter/tree/master

00:31 bms 

Add a stub port to install the vendor-neutral
AMQP 0.8 XML specification in a fairly central place.
This is hard versioned like the autotools ports.

19:17 bms 

Add new port py-txamqp, an asynchronous-capable AMQP messing transport
module for Python/Twisted, by Esteve Fernandez.

Tested with RabbitMQ 1.6.0 on FreeBSD 7.2-STABLE, i386 and amd64, using
Esteve's example code here:
        http://fluidinfo.com/esteve/stuff/txamqp_consumer.py
        http://fluidinfo.com/esteve/stuff/txamqp_publisher.py

Note: The Thrift-in-AMQP support is not yet built as it depends on the
Thrift bindings for Python which need to be fixed.

20:58 nox 

This is a Linux Fedora 10 infrastructure port for...

OpenLDAP is a suite of Lightweight Directory Access Protocol (v3) servers,
clients, utilities and development tools.

This package includes the following major components:

 * slapd - a stand-alone LDAP directory server
 * LDIF tools - data conversion tools for use with slapd

This is the latest stable release of OpenLDAP Software for general use.

WWW: http://www.OpenLDAP.org/

Obtained from:  Peter Jeremy <peterjeremy@optushome.com.au>

05:34 miwi 

p5::Jifty::Plugin::Authentication::Ldap is a LDAP Authentication Plugin
for p5-Jifty.

WWW:    http://search.cpan.org/dist/Jifty-Plugin-Authentication-Ldap/

PR:             ports/135558
Submitted by:   Wen Heping <wenheping at gmail.com>

20:47 garga 

GeoIP searches a GeoIP database for a given host or IP address, and
returns information about the country where the IP address is allocated.

This is a GeoIP implementation for rubygems

WWW:    http://geoip.rubyforge.org

20:30 miwi 

- Disconnect net/p5-ZConf-BGSet

19:34 miwi 

- Disconnect net/p5-ZConf-Mail

19:53 erwin 

Remove net/openpbx.org as it has been marked BROKEN for over 2 years.

19:51 erwin 

Remove net/evolution-rss as it has been marked BROKEN for over 4 months.

20:24 tabthorpe 

- Link citrix_xenapp to the build

15:41 amdmi3 

Clamz is a little command-line program to
download MP3 files from Amazon.com's music
store. It is intended to serve as a
substitute for Amazon's official MP3
Downloader, which is not free software
(and therefore is only available in binary
form for a limited set of platforms.)

Clamz can be used to download either individual
songs or complete albums that you have purchased
from Amazon.

Text from http://code.google.com/p/clamz/.

WWW:    http://code.google.com/p/clamz/

PR:             135401
Submitted by:   Helko Glathe <glathe.helko@googlemail.com>

23:05 edwin 

Curses based overview for the statistics generated by the Huawei
E169 3G USB modem. Please note that this requires at least FreeBSD
7.2 because it makes use of the u3g(4) driver.

20:59 pav 

- net/tftp-hpa and ftp/tftp-hpa are the same thing.  Remove the one more
  recently added.

Approved by:    maintainer

18:41 miwi 

This package helps you to encode and decode punycode strings easily.

WWW: http://pear.php.net/package/Net_IDNA/

PR:             ports/134962
Submitted by:   Michael Frey <frey at raum3.de>

04:21 cy 

net/ntp is no longer in RC status. It has gone GA.

21:41 imp 

Firmware port for bwi driver.

01:04 acm 

- New port: net/gambas2-gb-net

The gambas networking component

02:23 amdmi3 

Simpleproxy program acts as simple tcp proxy. It listens for local
socket, and any connection to this port will be forwarded to another
socket at remote host.

WWW: http://www.crocodile.org/software.html

PR:             134266
Submitted by:   pluknet <pluknet at gmail dot com>

17:18 dhn 

- Remove net/vnstati, use net/vnstat

Approved by:    tabthorpe (co-mentor)

23:45 miwi 

Grdc is a remote desktop client based on GTK+ and GNOME.

The Grdc GNOME applet:

 * A GNOME Desktop applet for easy-access of Grdc main features
 * List all remote desktop files and make the connection easily
 * Support remote desktop files grouping feature

WWW: http://grdc.sourceforge.net/

PR:             ports/133955
Submitted by:   Alexander Logvinov <ports at logvinov.com>

21:21 glarkin 

The RightScale Flexiscale gem has been designed to provide a robust
interface to Flexiscale's existing API.

WWW:    http://rightaws.rubyforge.org/

21:21 glarkin 

The RightScale Slicehost gem has been designed to provide a robust
interface to Slicehost's existing API.

WWW:    http://rightaws.rubyforge.org/

21:11 glarkin 

The RightScale GoGrid gem has been designed to provide a robust
interface to GoGrid's existing API.

WWW:    http://rightaws.rubyforge.org/

17:30 miwi 

Grdc is a remote desktop client based on GTK+ and GNOME.

The Grdc main program:

 * A pure GTK+ 2.0 application!
 * Maintain a list of remote desktop files for most frequently used servers
 * Make quick connections by directly putting in the server name
 * Remote desktops with higher resolutions are scrollable/scalable in both
   window and fullscreen mode
 * Viewport fullscreen mode: remote desktop automatically scrolls when the
   mouse moves over the screen edge.
 * Floating toolbar in fullscreen mode, allows you to switch between modes,
   toggle keyboard grabbing, minimize, etc.
 * RDP protocol is supported by rdesktop; VNC protocol is supported by
   libvncclient; SSH tunneling is supported by libssh.

WWW: http://grdc.sourceforge.net/

PR:             ports/133673
Submitted by:   Alexander Logvinov <ports at logvinov.com>

09:14 miwi 

Socket::Class provides a simple, fast and efficient way to
communicate with sockets. It operates outside of the Perl
IO layer and can be used as a replacement to IO::Socket.
Little parts of Bluetooth technology has been integrated.

WWW:    http://search.cpan.org/dist/Socket-Class/

PR:             ports/133796
Submitted by:   Wen Heping <wenheping at gmail.com>

09:16 clsung 

Net::GitHub - Perl Interface for github.com

http://github.com is a popular git host.

WWW:    http://search.cpan.org/dist/Net-GitHub/

16:02 ume 

New port - p5-Net-INET6Glue
Make common modules IPv6 ready by hotpatching

14:35 skreuzer 

Please welcome Net::OAuth::Simple

A simple Perl wrapper around the OAuth protocol

Approved by:    wxs (mentor)

00:10 cy 

An ntp release candidate is now available. Port has been resurrected.

22:52 miwi 

2009-03-27 net/sipxcalllib: old version, needs updating
2009-03-27 net/sipxcommserverlib: old version, needs updating, and does not
compile
2009-03-27 net/sipxconfig: depends on broken port net/sipxcommserverlib
2009-03-27 net/sipxmediaadapterlib: old version, needs updating
2009-03-27 net/sipxmedialib: old version, needs updating
2009-03-27 net/sipxpbx: depends on broken port net/sipxcommserverlib
2009-03-27 net/sipxproxy: depends on broken port net/sipxcommserverlib
2009-03-27 net/sipxportlib: old version, needs updating
2009-03-27 net/sipxpublisher: depends on broken port net/sipxcommserverlib
2009-03-27 net/sipxregistry: depends on broken port net/sipxcommserverlib
2009-03-27 net/sipxtacklib: old version, needs updating
2009-03-27 net/sipxvxml: old version, needs updating

04:10 edwin 

Remove net/penguintv-devel since the development version has not
been used for a long long time.

15:18 bms 

Add new port igmpproxy.
This is an IGMPv2 aware multicast forwarding proxy.
It cannot be run simultaneously with other multicast
routing daemons.

PR:             ports/130174
Submitted by:   Alexander Chernikov

04:03 wxs 

PKtAnon performs network trace anonymization. It is highly configurable
and uses anonymization profiles. Anonymization profiles allow for
mapping of arbitrary anonymization primitives to protocol attributes,
thus providing high flexibility and easy usability. A huge number of
anonymization primitives and network protocols are supported and ready
to use for online and offline anonymization.

WWW:    http://www.tm.uka.de/software/pktanon/

16:40 miwi 

This module implements the encoding and decoding of the IPv6 layer.

RFC: 2460

WWW: http://search.cpan.org/dist/Net-Frame-Layer-IPv6/

PR:             ports/132448
Submitted by:   Mars G Miro <spry at anarchy.in.the.ph>

16:40 miwi 

These modules implement the encoding and decoding of the ICMPv6 layer.

RFCs: 2463, 2461, 2460

WWW: http://search.cpan.org/dist/Net-Frame-Layer-ICMPv6/

PR:             ports/132445
Submitted by:   Mars G Miro <spry at anarchy.in.the.ph>

00:01 lwhsu 

Add istgt 20090223, an iSCSI target for FreeBSD 7.x with ZFS.

PR:             ports/132016
Submitted by:   Daisuke Aoyama <aoyama at peach.ne.jp>

13:57 beat 

It is new generation of TSOCKS.

Torsocks allows you to use most socks-friendly applications in
a safe way with Tor. It ensures that DNS requests are handled
safely and explicitly rejects UDP traffic from the application
you're using.

WWW: http://code.google.com/p/torsocks/

PR:             ports/131653
Submitted by:   Andrei Lavreniyuk <andy.lavr AT gmail.com>
Approved by:    miwi (mentor)

18:51 sobomax 

Update to 1.6.0.1 after repo-copy from net/asterisk-addons.

PR:             ports/131934
Submitted by:   Florian Smeets <flo@kasimir.com>

05:57 timur 

Submitted by:   timur

Brand new version of Samba 3.3.1, the starter of the 3.3 series. New
features, new bugs. Enjoy!

Major enhancements in Samba 3.3 include:

 General changes:
 o The passdb tdbsam version has been raised.

 Configuration/installation:
 o Splitting of library directory into library directory and separate
   modules directory.
 o The default value of "ldap ssl" has been changed to "start tls".

 File Serving:
 o Extended Cluster support.
 o New experimental VFS modules "vfs_acl_xattr" and "vfs_acl_tdb"
   to store NTFS ACLs on Samba file servers.

 Winbind:
 o Simplified idmap configuration.
 o New idmap backends "adex" and "hash".
 o Added new parameter "winbind reconnect delay".
 o Added support for user and group aliasing.
 o Added support for multiple domains to idmap_ad.

 Administrative tools:
 o The destination "all" of smbcontrol does now affect all running
   daemons including nmbd and winbindd.
 o New 'net rpc vampire keytab' and 'net rpc vampire ldif' commands.
 o The 'net' utility can now use kerberos for joining and authentication.
 o The 'wbinfo' utility can now add, modify and remove identity mapping entries.

05:31 marcus 

Add libproxy-webkit, a plug-in which allows WebKit-based web browsers to
make use of libproxy.

05:30 marcus 

Add libproxy-mozjs, a plug-in which allows Mozilla-based web browsers to
make use of libproxy.

05:29 marcus 

Add libproxy-kde, a plug-in which allows KDE applications to make use
of libproxy.

05:28 marcus 

Add libproxy-gnome, a plug-in which allows GNOME applications to make use
of libproxy.

05:26 marcus 

Add libproxy, a library that provides automatic proxy configuration management.
Plug-ins are available for GNOME, KDE, Mozilla, and WebKit.

WWW: http://code.google.com/p/libproxy/

11:10 lth 

Add p5-POE-Component-Server-Twirc 0.06, Twitter/IRC gateway.

20:24 miwi 

A versitile background setter supporting random backgrounds
that uses ZConf as the setting storage backend.

zbgset - Background setter.
zbgset-admin - Manages the settings.

WWW: http://search.cpan.org/~vvelox/ZConf-BGSet/

PR:             ports/131517
Submitted by:   Zane C, Bowers <vvelox at vvelox.net>

14:22 timur 

Rename sanba32-devel into samba32 to finish repocopy

21:33 cy 

Ntp is no longer in release candidate status. Remove the ntp-rc port.

21:17 sobomax 

Add asterisk16 after repo-copy from net/asterisk. Some functions (e.g.
DAHDI support) are still missed and will be added on later date.

22:38 miwi 

2009-01-19 games/emacs-chess: has been broken for more than 6 months
2009-02-01 devel/subversion-devel: Use devel/subversion or
devel/subversion-freebsd instead of this port
2009-01-19 devel/hs-hat: has been broken for more than 6 months
2009-01-19 devel/hs-hpl: has been broken for more than 6 months
2009-01-19 databases/mysqlbigram: has been broken for more than 6 months
2009-01-19 mail/claws-mail-clamav: has been broken for more than 6 months
2009-01-19 mail/sylpheed2-devel: has been broken for more than 6 months
2009-01-19 www/pecl-mnogosearch: has been broken for more than 6 months
2009-01-31 x11-fonts/mathfonts: This port was supported by Mozilla 1.8
(including Firefox 2.0) - to be replaced by  STIX fonts for Firefox 3.x
2009-01-19 x11-wm/fluxspace: has been broken for more than 6 months
2009-01-31 x11-wm/expocity: project has been abandoned
2009-01-19 x11/bbuname: has been broken for more than 6 months
2009-01-19 security/squidclam: has been broken for more than 6 months
2009-01-19 print/virtualpaper: depends on broken, expired port
2009-01-19 print/ifhp: has been broken for more than 6 months
2009-01-19 net-p2p/peercast: has been forbidden for more than 6 months
2009-01-19 palm/pdbc: has been broken for more than 6 months
2009-01-19 net-mgmt/NeTraMet: has been broken for more than 6 months
2009-01-19 net-im/sulci: has been broken for more than 6 months
2009-01-19 multimedia/mjpegtools-yuvfilters: has been broken for more than 6
months
2009-01-19 multimedia/helixplayer: has been broken for more than 6 months
2009-01-19 lang/quack: has been broken for more than 6 months
2009-01-19 misc/pybliographer: has been broken for more than 6 months
2009-01-19 net/versuch: has been broken for more than 6 months
2009-01-19 net/py-mantissa: has been broken for more than 6 months
2009-01-19 net/libunpipc: has been broken for more than 6 months
2009-01-19 net/gnometelnet: has been broken for more than 6 months
2009-01-19 net/gacxtool: depends on expired, broken port
2009-01-19 devel/py-coro: has been broken for more than 6 months
2009-01-19 chinese/stardict2-dict-zh_TW: has been broken for more than 6 months
2009-01-19 x11-themes/gtk-industrial-theme: has been broken for more than 6
months

22:48 pgollucci 

- Fix INDEX
- relocate net/p5-IO-MultiPipe -> devel/p5-IO-MultiPipe

Pointhat:       me :(

17:44 pgollucci 

This module implements various functions needed for making a ZConf backed mail
cleint. It also currently includes two small utilities, listed below.

zcmailcompose - Composes a mail message and sends it using the specified
 account.
zcgetmail - A getmail replacement using ZConf::Mail.

WWW: http://search.cpan.org/dist/ZConf-Mail/

PR:             ports/ports/130564
Submitted by:   Zane C, Bowers <vvelox at vvelox.net>

17:44 pgollucci 

Normally if a part of a pipe fails, depending on the location, it won't
be detected. This breaks down a command involving pipes and runs each
command seperately.

It uses open3 to run each chunk of the pipe.

    use IO::MultiPipe;

    my $pipes = IO::MultiPipe->new();

    #This sets the pipe that will be run.
    $pipes->set('sed s/-// | sed s/123/abc/ | sed s/ABC/abc/');
    if ($pipes->{error}){
        print "Error!\n";
    }

    #'123-ABCxyz' through the command set above.
    my $returned=$pipes->run('123-ABCxyz');

WWW: http://search.cpan.org/~vvelox/IO-MultiPipe/

PR:             ports/ports/130563
Submitted by:   Zane C, Bowers <vvelox at vvelox.net>

12:33 gerald 

Remove net/mpich.  It fails to build, does not have a maintainer, no
other port depends on it, and has been superseded by net/mpich2.

Discussed with: pav

00:54 kuriyama 

Add p5-URI-Template-Restrict 0.02, perl extension for restricted URI
Templates handler.

23:11 makc 

Add new port net/wpa_gui:

wpa_gui is a nice GUI frontend for wpa_supplicant tool.

WWW:    http://hostap.epitest.fi/wpa_supplicant/

PR:             ports/130347
Submitted by:   Ilya Bakulin <webmaster at kibab.com>
Approved by:    miwi (implicit)

12:03 miwi 

- Connect net/spread4

06:44 acm 

- Now it's part of fpc-fcl-net

06:23 acm 

- This unit was renamed to devel/fpc-fcl-async

09:42 az 

Net::OpenSSH is a secure shell client package implemented on top of
OpenSSH binary client (ssh).

10:24 pav 

- Remove net/nvnet, it's been in base since FreeBSD 6.0

17:22 miwi 

The purpose of vnstati is to provide image output support for
statistics collected using vnstat(1). However, the image file
format is limited to png. All basic outputs of vnStat are
supported excluding live traffic features. The image can be
outputted either to a file or to standard output.

vnstati is the image output command for vnstat(1). It provides
png image file output from database files created using vnStat.

WWW:    http://humdi.net/vnstat/

PR:             ports/129994
Submitted by:   Dennis Herrmann <adox at mcx2.org>

08:24 beech 

The FreeRADIUS Client is a framework and library for writing RADIUS
Clients which additionally includes radlogin, a flexible RADIUS aware
login replacement, a command line program to send RADIUS
authentication/authorisation requests and accounting records and a
utility to query the status of a RADIUS server.  All these programs are
based on a library which lets you develop a RADIUS-aware application in
less than 50 lines of C code. It is highly portable and runs on Linux,
many BSD variants and Solaris.

PR:             ports/129250
Submitted by:   netch at netch.kiev.ua

10:32 miwi 

Rubygem-oauth is a RubyGem for implementing both OAuth clients and
servers in Ruby applications.

WWW:    http://oauth.rubyforge.org/

PR:             ports/129514
Submitted by:   wenheping <wenheping at gmail.com>

20:36 miwi 

2008-09-19 japanese/escpf: Has been broken for more than 6 months
2008-09-19 java/java-gcj-compat: Has been broken for more than 6 months
2008-09-19 lang/screamer: Has been broken for more than 6 months
2008-10-01 misc/documancer: Unmaintained upstream
2008-09-19 misc/ipbt: Has been broken for more than 6 months
2008-10-13 multimedia/manslide: Use multimedia/smile instead
2008-09-19 net/globus4: Has been broken for more than 6 months
2008-09-19 net/p5-Parallel-MPI: Has been broken for more than 6 months
2008-01-28 net/p54u: website disappeared
2008-09-19 net-im/ginsu: Has been broken for more than 6 months
2008-09-19 net-p2p/py-kenosis-bittorrent: Has been broken for more than 6 months
2008-09-19 sysutils/sjog: Has been broken for more than 6 months
2008-09-19 textproc/Ebnf2ps: Has been broken for more than 6 months
2008-09-19 www/roxen: Has been broken for more than 6 months
2008-09-19 x11-fm/evidence: Has been broken for more than 6 months

15:33 miwi 

py-oauth is a python libarary for OAuth. OAuth is an open
protocol to allow API authentication in a simple and standard
method from desktop and web applications.

WWW:    http://pypi.python.org/pypi/oauth/

PR:             ports/129410
Submitted by:   Wen Heping <wenheping at gmail.com>

14:05 skv 

Add p5-XML-RPC 0.8, pure Perl implementation for an XML-RPC client and
server.

19:51 miwi 

Proxies are special objects which serve as mostly-transparent wrappers
around another object, intervening in the apparent behavior of the
wrapped object only when necessary to apply the policy (e.g., access
checking, location brokering, etc.) for which the proxy is responsible.

WWW: http://pypi.python.org/pypi/zope.proxy

PR:             ports/129159
Submitted by:   Wen Heping <wenheping at gmail.com>

20:53 miwi 

pecl-oauth is a php interface to the oauth protocol.
Oauth is an authorization protocol built on top of
HTTP which allows applications to securely access
data without having to store usernames and passwords.

WWW: http://pecl.php.net/package/oauth/

PR:             ports/129167
Submitted by:   Wen Heping <wenheping at gmail.com>

16:28 miwi 

Sort::Key::IPv4
Sorts lists of objects by some property containing an IPv4 address

WWW: http://search.cpan.org/dist/Sort-Key-IPv4/

23:04 miwi 

Rubygem-macaddr is a cross platform mac address determination
for ruby.

WWW:    http://codeforpeople.com/lib/ruby

PR:             ports/128625
Submitted by:   Wen Heping <wenheping at gmail.com>

20:07 miwi 

LinKNX is a backend for controlling a KNX/EIB home and building automation
system. It connects to eibd which is part of the BCU SDK and keeps state of
KNX devices such as lamps, window blinds, heating and so on.
Furthermore it provides a powerful, rule-based event after treatment, e.g.
for switching other KNX devices, sending e-mail or SMS or executing a shell
command. You can configure and control the LinKNX daemon using an XML-style
protocol via TCP network socket or Unix domain socket.

WWW: http://linknx.sourceforge.net/

PR:             ports/128320
Submitted by:   Björn König <bkoenig at alpha-tierchen.de>

20:00 miwi 

An interface for communicating with Twitter's public API.
Send status updates, fetch information, add friends, etc.

WWW: http://pear.php.net/package/Services_Twitter/

PR:             ports/128647
Submitted by:   Wen Heping <wenheping at gmail.com>