KSBA = rot13(digit_to_letter(x509)) to be pronounced as Kasbah
KSBA is a library to make X.509 certificates as
well as the CMS easily accessible by other applications. Both
specifications are building blocks of S/MIME and TLS.
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
security: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Dupre <ale@FreeBSD.org>
* Alex Kapranoff <kappa@rambler-co.ru>
* Alex Samorukov <samm@freebsd.org>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kriventsov <avk@vl.ru>
* Alexander Leidinger <netchild@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above )
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
- Add LICENSE
- Convert to new LIB_DEPENDS format
- Use USES=tar:bzip2
- Cosmetic change
- Take maintainership
- Remove Author line
- Use single space after WWW:
[Errno 11] Resource Temporarily Unavailable
Reassigning my ports back to the pool with the hope of freeing up
to do more FreeBSD work in the future.
Submitted by: glarkin
- Updated to 1.3.0
- Removed explicit library version number from gpg-error in LIB_DEPENDS
PR: ports/172202
Submitted by: Doug Barton <dougb@freebsd.org>
Update libksba to 1.2.0, and update dependent ports.
The patch also adds a verify target for the PGP signature
of the distfile.
Noteworthy changes in version 1.2.0 (2011-03-01)
------------------------------------------------
* New functions to allow the creation of X.509 certificates.
This release adds features required by the GnuPG 2.1 development
version.
PR: ports/155506
Submitted by: me
Approved by: maintainer timeout
- Updated to 1.1.0
- Bumped shlib version in pkg-plist to match upstream
Noteworthy changes in version 1.1.0 (2010-10-26)
------------------------------------------------
* New functions to fix a leak in dirmngr.
* Interface changes relative to the 1.0.0 release:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ksba_reader_set_release_notify NEW
ksba_writer_set_release_notify NEW
Reported by: portscout via miwi
- Updated to 1.0.8.
- Added explicit minimal version check for libgpg-error dependency.
- Explicitly build static library, since the default changed to "off" with
this upstream version.
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Set --mandir and --infodir in CONFIGURE_ARGS if the configure script
supports them. This is determined by running ``configure --help'' in
do-configure target and set the shell variable _LATE_CONFIGURE_ARGS
which is then passed to CONFIGURE_ARGS.
- Remove --mandir and --infodir in ports' Makefile where applicable
Few ports use REINPLACE_CMD to achieve the same effect, remove them too.
- Correct some manual pages location from PREFIX/man to MANPREFIX/man
- Define INFO_PATH where necessary
- Document that .info files are installed in a subdirectory relative to
PREFIX/INFO_PATH and slightly change add-plist-info to use INFO_PATH and
subdirectory detection.
PR: ports/111470
Approved by: portmgr
Discussed with: stas (Mk/*), gerald (info related stuffs)
Tested by: pointyhat exp run
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
Update libksba to version 0.9.11.
Update gnupg-devel to 1.9.16.
Update dirmngr to 0.9.2.
Bump PORTREVISION for pinentry (for libksba shared library bump).
Update libgcrypt to 1.2.1. Changes:
* made the code try to lock secure memory pool not only when running as
root,
* fixed type usage in Serpent,
* made the code mix the PID into the entropy pool for better protection
after a fork,
* fixed memory leak in RSA.
* fixed alignment problems in Rijndael,
* fixed memory leak in gcry_pk_sign(),
* fixed broken pointer access in gcry_ac_open(),
* updated the documentation,
* fixed several other bugs.
Chase Shared library version and bump PORTREVISION of affected ports.
Apply a big libtool patch to allow porters to use the libtool installed by
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Update libgcrypt to the new stable version 1.2.0
Retire libgcrypt-devel
Switch back to security/libgcrypt and bump PORTREVISION for
- gnutls
- gnutls-devel
- gsasl
- opencdk
- vpnc
libggz:
- Remove dependency on libgcrypt, because the port does not yet
work with the new libgcrypt
libksba:
(Only the first 15 lines of the commit message are shown above )
Whoa there, boy, that's a mighty big commit y'all have there...
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
libtool uber-patch
* kill devel/libtool and move to devel/libtool13, upgrading to 1.3.5
* upgrade repo-copied devel/libtool14 to 1.4.3
* break out libltdl into its own separate port
* move to version-numbered binaries/scripts (ie: there is *no* 'libtool'
any more -- USE_LIBTOOL and USE_LIBTOOL_VER are your friends)
Approved by: portmgr (kris) - for the bsd.port.mk hooks
Tested by: bento 4-exp builds (repeatedly)
