libgpg-error is a library that defines common error values
for all GnuPG components. Among these are GPG, GPGSM, GPGME,
GPG-Agent, libgcrypt, pinentry, SmartCard Daemon
and possibly more in the future.
===> The following configuration options are available for libgpg-error-1.61:
DOCS=on: Build and/or install documentation
NLS=on: Native Language Support
TEST=off: Build and/or run tests
===> Use 'make config' to modify these settings
security/libgpg-error: Fix gpgrt-config
Fix the default search path for pkgconfig files in gpgrt-config.
Previously, it was necessary to supply the path manually with the
--libdir argument, but this can now be omitted.
Approved by: portmgr (blanket)
security/libgpg-error: Update to 1.48
Upstream doesn't seem to provide a changelog apart from git commit log
PR: 277273
Reviewed by: novel (maintainer)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
security: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* <ports@c0decafe.net>
* Aaron Dalton <aaron@FreeBSD.org>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
* Aldis Berjoza <aldis@bsdroot.lv>
* Alex Dupre <ale@FreeBSD.org>
* Alex Kapranoff <kappa@rambler-co.ru>
* Alex Samorukov <samm@freebsd.org>
* Alexander Botero-Lowry <alex@foxybanana.com>
* Alexander Kriventsov <avk@vl.ru>
* Alexander Leidinger <netchild@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above )
security/libgpg-error: improve threading detection
Pull the upstream patch to improve threading detection.
This is expected to only fix issues on the older non-supported FreeBSD
releases, so do not bump PORTREVISION.
Obtained from: upstream
Install texinfo files (GNU info) into ${PREFIX}/share/info
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
security/libgpg-error: Revert use of tradcpp (F11 regression)
With the previous change, libgpg-error does not pass configure target
on FreeBSD 11 due tradcpp failing "sanity checks". This is a regression
since this port builds fine on FreeBSD 10. However, 2037 ports get
skipped (this port is *way* too important) as a result, so revert the
gcc-5 fix until a solution can be found.
PR: 197562
security/libgpg-error: Switch cpp to support gcc-5
This port relies on CPP behavior that changes on GCC 5. To ensure
libgpg-error keeps building on the newest GCC, add a build dependency
on tradcpp and use it instead.
PR: 197562
Submitted by: marino
Approved by: maintainer (novel)
Introduce ICONV_CONFIGURE_ARG variable defined at Uses/iconv.mk.
It's value is "--with-libiconv-prefix=/usr/local" for systems
before 100043 with ports libiconv and to use at systems post
100043 with base iconv it's value is "" (NULL).
Co-authors: bapt, madpilot and bsam (me)
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Update CONFIGURE_ARGS for how we pass CONFIGURE_TARGET to configure script.
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
(Only the first 15 lines of the commit message are shown above )
Bump portrevision due to upgrade of devel/gettext.
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
Remove USE_GPG from all effected ports. This knob is a no-op and the way it
was supposed to work is useless, because if we can't trust the distfile from
the remote machine, we can't trust the signature from the same machine either.
Our MD5 and SHA256 are good for checking both the sanity and the
trustiness of distfiles.
Approved by: portmgr (erwin), erwin (mentor)
- Update to 1.4 (shared library version bumped to 3)
- USE_LDCONFIG instead of depracted INSTALLS_SHLIB
- Transfer maintainership to Roman Bogorodskiy (novel)
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
