The Heartbeat program is one of the core components of the Linux-HA
(High-Availability Linux) project. Heartbeat is highly portable,
and runs on every known Linux platform, and also on FreeBSD and
Solaris. Ports to other OSes are also in progress.
Heartbeat is the first piece of software which was written for the
Linux-HA project. It performs death-of-node detection,
communications and cluster management in one process.
The Heartbeat program has been around for a while. It has a great
many strengths, and yet there were a few weaknesses in version 1
that needed to be addressed:
- limitation on two nodes for cluster size
- inability to monitor resources for their correct operation
- minimal ability to express dependency information
This release removes these limitations.
WWW: http://linux-ha.org
===> The following configuration options are available for heartbeat-2.1.4_29:
APCSNMP=off: Enable APC SNMP Stonith Device
DOCS=on: Build and/or install documentation
DRAC3=off: Enable Dell DRACIII Stonith Device
LDIRECTORD=off: Enable Linux Director Daemon
MGMT=off: Enable X11 Management Utilities
===> Use 'make config' to modify these settings
Remove expired ports:
2020-09-15 audio/abraca: Uses deprecated version of python
2020-09-15 audio/ardour5: Uses deprecated version of python
2020-09-15 audio/cplay: Uses deprecated version of python
2020-09-15 audio/cpp-xmms2: Uses deprecated version of python
2020-09-15 audio/p5-xmms2: Uses deprecated version of python
2020-09-15 biology/haplohseq: Uses deprecated version of python
2020-09-15 biology/tophat: Uses deprecated version of python
2020-09-15 chinese/ibus-array: Uses deprecated version of python
2020-09-15 comms/congruity: Uses deprecated version of python
2020-09-15 comms/libbtbb: Uses deprecated version of python
2020-09-15 comms/quisk: Uses deprecated version of python
2020-09-15 databases/mtools-mongodb: Uses deprecated version of python
2020-09-15 databases/mydbf2mysql: Uses deprecated version of python
(Only the first 15 lines of the commit message are shown above )
- Remove pkg-install.in which stopped heartbeat on
update (even if the changes didn't require it to
do so, so it did more harm than good).
- Take maintainership
PR: 216675
Approved by: maintainer
- Update security/gnutls to 3.4.10.
- Rename the LIBDANE option DANE because that's the name of the protocol
supported by libgnutls-dane and gnutls-cli. Also clarify the option
description.
- Add an IDN option.
- libgnutls-openssl has been removed in 3.4. Some ports used this library
in their LIB_DEPENDS but no port actually required it.
- Some old API functions have been removed. Ports that used these have been
updated or patched to use the new API.
- Add a patch to print/cups to prevent overlinking of libgnutls.so.
- Bump PORTREVISION on dependent ports.
net-im/jabber: This port used the old API to give users fine grained
control over which crypto algorithms were used via a configuration file.
It's not immediately obvious how to port this to the new API so the port
always uses the defaults now.
www/hydra: Mark BROKEN. This uses more removed calls than the other ports,
is said to be alpha quality and not fully functional and has been abandoned
10 years ago.
PR: 207768
Exp-run by: antoine
Approved by: portmgr (antoine)
Install net/libnet headers and libraries back in the location where other
ports expect it. The files were put in a different location to avoid a
conflict with net/libnet10 but this port has been removed a while ago now.
PR: 208122
Exp-run by: antoine
Approved by: portmgr (antoine)
MASTER_SITES cleanup.
- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.
While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.
Also, replace some EXTRACT_SUFX occurences with USES=tar:*.
Checked by: make fetch-urlall-list
With hat: portmgr
Sponsored by: Absolight
Replace USE_AUTOTOOLS=libltdl with an ordinary LIB_DEPENDS in all ports.
There are only 60 such ports so there doesn't need to be a separate
keyword or USES for this.
Approved by: portmgr (bapt)
- Replace security/gnutls with security/gnutls3 and update to 3.2.15
- Bump PORTREVISION on all ports that depend on security/gnutls and
adjust all ports that depend on security/gnutls3
- Update mail/anubis to version 4.2 which supports gnutls 3.x
- Update mail/libvmime to a development snapshot (recommended by upstream
developers)
PR: 191274
Exp-run by: antoine
Approved by: portmgr (antoine)
The FreeBSD x11@ and graphics team proudly presents
a zeising, kwm production, with help from dumbbell, bdrewery:
NEW XORG ON FREEBSD 9-STABLE AND 10-STABLE
This update switches over to use the new xorg stack by default on FreeBSD 9
and 10 stable, on osversions where vt(9) is available.
It is still possible to use the old stack by specifying WITHOUT_NEW_XORG in
/etc/make.conf .
FreeBSD 8-STABLE and released versions of FreeBSD still use
the old version.
A package repository with binary packages for new xorg will
be available soon.
This patch also contains updates of libxcb and related ports, pixman, as well
(Only the first 15 lines of the commit message are shown above )
sysutils/heartbeat: fix build without gcc
- Fix build without gcc
- Convert lib depends to new format [1]
PR: ports/183800
Submitted by: maintainer, wg [1]
* Update the glib to 2.34.3 and gtk20 to 2.24.17 and gtk30 to 3.6.4 which
are the latest stable releases.
* Update vala to the newest stable release 0.18.1, also update a few ports
in the gtk/gnome stack.
* The c++ bindings ports for glib, atk, gconf, etc, have now USE_GNOME toggles.
* Remove pkg-config run depends from glib20 and freetype2. This doesn't
eliminate pkg-config run dependency completely, a second phase is needed
and is planned.
* Support for .:run. and .:build. for USE_GNOME components was added.
Currently only libxml2 and libxslt support this mechanism.
* Updates of the telepathy stack and empathy.
* Trim makefile headers, convert ports to new options, trim off library
versions for some ports.
* Fix other ports so they build with the new glib version.
Thanks to miwi and crees for helping out with some exp-runs.
Approved by: portmgr (miwi & bapt)
Obtained from: gnome team repo
In the rc.d scripts, change assignments to rcvar to use the
literal name_enable wherever possible, and ${name}_enable
when it's not, to prepare for the demise of set_rcvar().
In cases where I had to hand-edit unusual instances also
modify formatting slightly to be more uniform (and in
some cases, correct). This includes adding some $FreeBSD$
tags, and most importantly moving rcvar= to right after
name= so it's clear that one is derived from the other.
Remove more tags from pkg-descr files fo the form:
- Name
em@i.l
or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.
- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead
PR: 157936
Submitted by: myself
Exp-runs by: pav
Approved by: pav
- fix crash when clock_t (signed 32bit int) rolls over on amd64
Thanks to Rudolf Polzer and Justin Head!
PR: ports/157176
Submitted by: Rudolf Polzer <rpolzer@mucke-novak.de>
Approved by: Justin Head <ports@encarnate.com> (maintainer)
- Proper FreeBSD startup script is now available.
- Building with NOPORTDOCS succeeds.
- Added drac3 and apcmastersnmp stonith plugin install options.
- Workaround for vacm, bladehpi, and ipmilan stonith plugin auto-building.
- Added further information on v1 => v2 upgrade to pkg-message.
- Added MAKE_JOBS_SAFE as the port can be parallel built.
- Bumped PORTREVISION
PR: ports/139132
Submitted by: Justin Head <ports@encarnate.com>
. fix some regexps for ip address detection; [1]
. bump PORTREVISION.
PR: ports/140012 [1]
Submitted by: Mark Round <mark.round at ahc.uk.com> [1]
Final patch by: maintainer (Justin Head <ports at encarnate.com>) [1]
. current implementation of function find_interface_bsd() in [1]
heartbeat-2.1.4 used in port sysutils/heartbeat does not
work correctly if there are multiple interfaces with the
same IP address (where only one of is UP, the others are
DOWN). Fix this with files/patch-resources-OCF-IPaddr;
. bump PORTREVISION.
PR: ports/137865 [1]
Submitted by: Michael Leun <michael.leun at arcor.net> [1]
Approved by: Justin Head <ports at encarnate.com> (maintainer) [1]
-Repocopy devel/libtool15 -> libtool22 and libltdl15 -> libltdl22.
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
. update to version 2.1.4;
. add a note to /usr/ports/UPDATING;
. add $PATCH_DEPENDS found by tinderbox test;
. switch maintainership to the submitter;
. use %%DATADIR%% at pkg-plist;
. use $DIST_SUBDIR because distname does not include "heartbeat" string.
PR: ports/121050
Submitted by: Justin Head <ports@encarnate.com>
Approved by: scott-ports@tummy.com (maintainer timeout at least two months)
Bump the version of the curl shared library after the ftp/curl update
to 7.19.2.
Bump PORTREVISION, even on the ports that do not have a versioned
dependency, since the binaries will most probably still stop working.
- Patch net/libnet* to versioned libraries and header files, so they can
coexist
PR: ports/103861
Submitted by: alepulver
Tested by: pointyhat
With hat: portmgr
Update the ftp/curl port to 7.16.0.
Bump PORTREVISION of all dependent ports.
Fix the build errors in the few ports that still use the long deprecated,
and now obsoleted, cURL options.
Thanks to everyone who took the time to look over the patch!
Discussed on: -ports
- Update to 1.2.5, fixing a DoS vulnerability.
- usr /var for runtime files making it possible to keep /usr mounted r/o.
- Grab 275 as a reserved UID and GID.
- Remove old cruft in pkg-install.
- Make 'make -DBATCH install' work non-interactively.
- Make 'pkg_add heartbeat-1.2.5' work non-interactively.
- Installation will fail without the user/group, so I simply create them.
PR: ports/104577
Submitted by: Ulrich Spoerlein <uspoerlein@gmail.com>
Approved by: Scott Kleihege <scott-ports@tummy.com> (maintainer)
- s,INSTALLS_SHLIB,USE_LDCONFIG,g
- these include security/ sysutils/ textproc/ maintained by ports@
PR: ports/101916
Submitted by: Gea-Suan Lin <gslin_AT_gslin dot org>
- Update to 1.2.4 [1]
This port now also:
- respects NOPORTDOCS
- installs documentation in ${DOCSDIR} instead of ${DOCSDIR}-${PORTVERSION}
- builds on 4.x with an EXTRA_PATCH
- installs startup scripts in ${PREFIX}/etc/rc.d instead of hardcoded
/usr/loal/etc/rc.d
PR: 93851
Submitted by: Scott Kleihege <scott-ports@tummy.com> (maintainer) [1]
Security: VuXML (f6447303-9ec9-11da-b410-000e0c2e438a)
Mass-conversion to the USE_AUTOTOOLS New World Order. The code present
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
libnet update:
- move 1.0 obsoleted version to net/libnet10
net/libnet is latest Stable Version
net/libnet is latest Beta Version
- Fix all depended ports with a new DEPENDS scheme
- While I'm here fix security/yersinia build on 4.x
(getopt_long and ncurses issues)
PR: ports/85519 (based on)
Submitted by: Stas Yakovlev <stas.yakovlev_at_gmail.com>
