U-Boot loader and related files for the FriendlyARM NanoPi-R4S (4GB/LPDDR4)
To install this bootloader on an sdcard just do:
dd if=/usr/local/share/u-boot/u-boot-nanopi-r4s/idbloader.img of=/path/to/sdcarddevice seek=64 bs=512 conv=sync
dd if=/usr/local/share/u-boot/u-boot-nanopi-r4s/u-boot.itb of=/path/to/sdcarddevice seek=16384 bs=512 conv=sync
sysutils/u-boot-nanopi-r4s: Unbreak after the update to v2023.10
Like Rockpro64 it also uses RK3399 so likely needs those patches.
Untested as I don't have this board.
Sponsored by: Beckhoff Automation GmbH & Co. KG
Fix WWW in parent/child ports
Many of the WWW are overwritten later which means the wrong value
is used. This did not happen before where the children were either
a) just using the pkg-descr from the parents
b) or had their own separate pkg-descr with custom WWW
Use WWW?= in parents when the child's WWW is different.
Children that use the same WWW as the parent can just inherit it,
i.e., the child WWW can be removed.
Approved by: portmgr (implicit)
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
sysutils/u-boot-nanopi-r4s: u-boot port for FriendlyArm NanoPi R4S
U-Boot loader and related files for the FriendlyARM NanoPi-R4S (4GB/LPDDR4)
To install this bootloader on an sdcard just do:
dd if=/usr/local/share/u-boot/u-boot-nanopi-r4s/idbloader.img
of=/path/to/sdcarddevice seek=64 bs=512 conv=sync
dd if=/usr/local/share/u-boot/u-boot-nanopi-r4s/u-boot.itb
of=/path/to/sdcarddevice seek=16384 bs=512 conv=sync
WWW: https://www.denx.de/wiki/U-Boot
PR: 257045
Approved by: manu@
