Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

www: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *
  *  <hvo.pm@xs4all.nl>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron LI <aly@aaronly.me>
  *  Aaron Zauner <az_mail@gmx.at>
  *  Abel Chow <achow@transoft.net>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Adrian Steinmann <ast@marabu.ch>
  *  Akinori MUSHA aka knu <knu@idaemons.org>

www/p5-Dancer2: Update to 0.400000

www/p5-Dancer2: Update to 0.301004

www/p5-Dancer2: Update to 0.301003

www/p5-Dancer2: Update to 0.300005

Changes:	https://metacpan.org/changes/distribution/Dancer2

Remove # $FreeBSD$ from Makefiles.

- Update to 0.301001
- Remove p5-App-Cmd from RUN_DEPENDS as per upstream change

- Update to 0.301000

Update to 0.300005

Changes:	https://metacpan.org/changes/distribution/Dancer2

- Update to 0.300004

Cosmetic change

Update to 0.300003

Changes:	https://metacpan.org/changes/distribution/Dancer2

- Update to 0.300001

- Update to 0.300000

Update to 0.208001

Changes:	https://metacpan.org/changes/distribution/Dancer2

- Update to 0.208000

Remove outdated PERL_LEVEL check

Update to 0.207000

Changes:	https://metacpan.org/changes/distribution/Dancer2

Fix every instance of RUN_DEPENDS:=${BUILD_DEPENDS} in p5 ports, except
for where it resulted in a change in output from build-depends-list or
run-depends-list.

Approved by:	portmgr (adamw)

Fix *_DEPENDS

- Add missing p5-Clone
- p5-File-ShareDir-Install is a build-only dependency
- p5-HTTP-Body is not used
- Fix version requirement of p5-HTTP-Headers-Fast
- Bump PORTREVISION for dependency change

- Update to 0.206000
Changes: https://metacpan.org/changes/distribution/Dancer2

Update WWW

search.cpan.org is shutting down.
It will redirect to metacpan.org after June 25, 2018.

With hat:	perl

Update to 0.205002

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Fix license information for portgs that use "the same license as Perl".

Sponsored by:	Absolight

Update to 0.205001

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Add PERL_LEVEL check

- Bump PORTREVISION for dependency change

Update to 0.205000

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Update to 0.204004

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Update to 0.204003

- Add LICENSE_FILE
- Update TEST_DEPENDS:
  - Remove www/p5-Template-Toolkit which was added to BUILD_DEPENDS and
RUN_DEPENDS
  - Add devel/p5-Test-EOL

Changes:	http://search.cpan.org/dist/Dancer2/Changes

- Update to 0.204002
Changes: http://search.cpan.org/src/CROMEDOME/Dancer2-0.204002/Changes

Add a dep on p5-YAML so that p5-Dancer2 can read its own config files.

PR:		215103
Approved by:	swills

Update to 0.204001.

Changes: https://metacpan.org/changes/distribution/Dancer2

Update to 0.204000.

Changes: https://metacpan.org/changes/distribution/Dancer2

Update to 2.03001.

Changes: https://metacpan.org/changes/distribution/Dancer2

Unbreak INDEX (and the port)

Pointy hat:	wen
Sponsored by:	Absolight

- Update to 0.202000
Changes: http://cpansearch.perl.org/src/CROMEDOME/Dancer2-0.202000/Changes

- Update to 0.201000
Changes: http://cpansearch.perl.org/src/CROMEDOME/Dancer2-0.201000/Changes
- Update DEPENDS

Update to 0.200002. Add p5-AnyEvent to TEST_DEPENDS.

Activate the XS option by default.

Changes: https://metacpan.org/changes/distribution/Dancer2

www/p5-Dancer2: 0.200000 -> 0.200001

  http://cpansearch.perl.org/src/XSAWYERX/Dancer2-0.200001/Changes

www/p5-Dancer2: 0.166001 -> 0.200000
security/p5-Dancer2-Plugin-Passphrase: 3.2.2 -> 3.3.0
security/p5-Dancer2-Plugin-Auth-Extensible: 0.502 -> 0.600
security/p5-Dancer2-Plugin-Auth-Extensible-Provider-DBIC: 0.502 -> 0.600
security/p5-Dancer2-Plugin-Auth-Extensible-Provider-Usergroup: 0.24 -> 0.600

Changes:
  http://cpansearch.perl.org/src/XSAWYERX/Dancer2-0.200000/Changes
  http://search.cpan.org/src/SYSPETE/Dancer2-Plugin-Passphrase-3.3.0/CHANGES
 
http://search.cpan.org/src/HORNBURG/Dancer2-Plugin-Auth-Extensible-0.600/Changes
 
http://search.cpan.org/src/HORNBURG/Dancer2-Plugin-Auth-Extensible-Provider-DBIC-0.600/Changes
 
http://search.cpan.org/src/HORNBURG/Dancer2-Plugin-Auth-Extensible-Provider-Usergroup-0.600/Changes

- Upgrade Dancer2 with those other ports that depend on it

PR:		209961, 209962, 209966, 209975, 209978
Submitted by:	Henk van Oers <hvo.pm@xs4all.nl> (maintainer)

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

- Update to 0.166001

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Update to 0.166000.

Changes: https://metacpan.org/changes/distribution/Dancer2

- Update to 0.165000
- Sort PLIST

Changes:	http://search.cpan.org/dist/Dancer2/Changes

- Update to 0.164000
Changes: http://search.cpan.org/src/XSAWYERX/Dancer2-0.164000/Changes
- Update DEPENDS

- Update to 0.163000
- Fix *_DEPENDS:
  - Remove p5-MIME-Base64: it is already in all supported Perl releases
  - Remove p5-MooX-Types-MooseLike-Numeric and add p5-MooX-Types-MooseLike
  - Add missing p5-Role-Tiny

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Make it so that the default Perl is always called perl5.

- Move Perl's man1 files along with its man3 files.
- Move where Perl installs its modules man1 pages.
- Convert the ports installing man1 pages.
- Make different Perl versions installable at the same time.
  Though you should note that only the default version can be used to
  install Perl modules, and the non default Perl versions cannot use the
  modules installed via ports if they contain .so as they are installed
  in a version specific directory.

Reviewed by:	bapt (the Mk bits)
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3542

Piggyback off the previous commit. Add two more modules two TEST_DEPENDS
to enable the full test suite, and add two more XS modules to the XS
option that should have meaningful effects.

- Update to 0.162000

Changes:	http://search.cpan.org/dist/Dancer2/Changes

- Update to 0.161000

Changes:	http://search.cpan.org/dist/Dancer2/Changes

- Update to 0.160003

Changes:	http://search.cpan.org/dist/Dancer2/Changes

- Update to 0.160002
- Add NO_ARCH
- Sort PLIST

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Update to 0.160001.

While here, sort TEST_DEPENDS, and add the XS modules to it.

Changes: https://metacpan.org/changes/distribution/Dancer2

Update to 0.160000, and fix whitespace alignment.

Changes: https://metacpan.org/changes/distribution/Dancer2

- Update to 0.159003

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Use XS from bsd.options.desc.mk.

- Add missing dependency
- Bump PORTREVISION for dependency change

PR:		198334
Submitted by:	<fullermd@over-yonder.net>

- Update to 0.159002

Changes:	http://search.cpan.org/dist/Dancer2/Changes

Digest::SHA dependency is unnecessary here.

Remove a number of unused dependencies.
	p5-HTTP-Server-Simple-PSGI support was removed
	p5-LWP-Protocol-PSGI is for testing
	p5-Path-Class isn't used
	p5-URI-Escape-XS isn't used; it wants p5-URI instead

While here, add an XS option that depends on optional XS modules:
	p5-CGI-Deurl-XS
	p5-URL-Encode-XS
	p5-JSON-XS
	p5-YAML-LibYAML (moved from BUILD_DEPENDS to here)

PORTREVISION bump for these changes.

Update to 0.159001.

Changes: https://metacpan.org/changes/distribution/Dancer2

Update to 0.159000.

Changes: https://metacpan.org/changes/distribution/Dancer2

Dancer2 now preferentially uses Plack::MIME instead of MIME::Types so remove
that as a dependency.

Also, reset maintainership to perl@ per maintainer's request. Thanks to wen
for his time spent maintaining this port.

PR:		197993
Approved by:	wen (maintainer)

- Update to 0.158000
Changes: http://search.cpan.org/src/XSAWYERX/Dancer2-0.158000/Changes

PR:		196494
Submitted by:	adamw@

- Update to 0.157001
Changes: http://cpansearch.perl.org/src/XSAWYERX/Dancer2-0.157001/Changes

- Update to 0.156001
Changes: http://search.cpan.org/src/XSAWYERX/Dancer2-0.156001/Changes

- Update to 0.155004
Changes: http://cpansearch.perl.org/src/XSAWYERX/Dancer2-0.155004/Changes
- Add missing DEPENDS

Change the way Perl modules are installed, update the default Perl to 5.18.

Before, we had:

  site_perl :           lib/perl5/site_perl/5.18
  site_perl/perl_arch : lib/perl5/site_perl/5.18/mach
  perl_man3 :           lib/perl5/5.18/man/man3

Now we have:

  site_perl : lib/perl5/site_perl
  site_arch : lib/perl5/site_perl/mach/5.18
  perl_man3 : lib/perl5/site_perl/man/man3

Modules without any .so will be installed at the same place regardless of the

- Update to 0.153002
Changes: http://search.cpan.org/src/XSAWYERX/Dancer2-0.153002/Changes

- Update to 0.151000
Changes: http://cpansearch.perl.org/src/XSAWYERX/Dancer2-0.151000/Changes

- Add missing DEPENDS

Reported by:	info@alvin.be

- Update to 0.150000
Changes: http://cpansearch.perl.org/src/XSAWYERX/Dancer2-0.150000/Changes
- Add missing depends

- Fix plist

Reported by:	swill@ (Thanks !)

- Update to 0.141000
Changes: http://search.cpan.org/src/XSAWYERX/Dancer2-0.141000/Changes

- Update to  0.140001

PR:		189287
Submitted by:	Muhammad Moinur Rahman <5u623l20@gmail.com>

- Update to 0.11
Changes: http://cpansearch.perl.org/src/XSAWYERX/Dancer2-0.11/Changes
- Add missing DEPENDS

- Move man pages into pkg-plist to finish stage conversion

Spotted by:	az@

- Update to 0.10
Changes: http://cpansearch.perl.org/src/SUKRIA/Dancer2-0.10/Changes
- Support stage build

Add NO_STAGE all over the place in preparation for the staging support (cat:
www)

- Update to 0.08
Changes: http://cpansearch.perl.org/src/XSAWYERX/Dancer2-0.08/Changes

- Convert to new perl5 framefork

Reported by:	az@

Dancer2 is the new generation of Dancer, the lightweight web-framework for
Perl. Dancer2 is a complete rewrite based on Moo.

WWW: http://search.cpan.org/dist/Dancer2/