Regenerate all distfiles using gitlab as source.

This regeneration is required as the new gitlab version changed
the address and the directory the source files can be downloaded.

This commit also applies some small fixes to make sure all ports using
gitlab are buildable.

Reviewed by:	mat
Approved by:	portmgr
Differential Revision:	https://reviews.freebsd.org/D29628

One more small cleanup, forgotten yesterday.
Reported by:	lwhsu

Remove # $FreeBSD$ from Makefiles.

Prefer graphics/ligvrsvg2-rust over graphics/librsvg2

- switch to the more modern version of librsvg2 on architectures
  supporting rust
- this will fix some graphical issues on these architectures

PR:		250276
Exp-run by:	antoine
Submitted by:	tobik
Differential Revision:	https://reviews.freebsd.org/D18878

Add USES=xorg USES=gl, ports categories x

Add USES=xorg and USES=gl to ports in categories starting with 'x'
While here, try to sprinkle other USES (mostly gnome and sdl) as needed.

x11/tint: Update to 16.7

PR:		239595
Submitted by:	yamagi@yamagi.orga (maintainer)

Change cmake default behaviour to outsource.

Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".

I tried to only set insource where explictely needed.

PR:		232038
Exp-run by:	antoine

These ports now build on powerpc64.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

x11/tint: Update to 16.6

PR:		230384
Submitted by:	yamagi@yamagi.org (maintainer)

Update to version 16.4

PR:		228221
Submitted by:	maintainer

Update to version 16.2

PR:		227474
Submitted by:	maintainer

- Update `x11/tint' to version 16.1
- Add missing DOCS knob to OPTIONS_DEFINE
- Remove EXAMPLES knob (no-op with 16.1)
- Add USES=gettext-runtime (libintl.so is always linked in)
- Add USE_XORG=xext per `stage-qa' warning
- Changes: https://gitlab.com/o9000/tint2/blob/16.1/ChangeLog

PR:		225166
Submitted by:	Dmitri Goutnik

x11/tint: update 15.2 -> 15.3

- Delete patches accepted by upstream

PR:		223590
Submitted by:	Yamagi Burmeister <yamagi@yamagi.org> (maintainer)

- Update x11/tint to 15.2
- Fix portlint warnings about variable ordering
- While here sort plist

PR:		222725
Submitted by:	yamagi@yamagi.org (maintainer)

Update x11/tint to 0.14.5

PR:		219532
Submitted by:	yamagi@yamagi.org (maintainer)

Mark some ports failing on power64.  In cases where the error message
was a stub, provide a real one.

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)
Reported by:	swills

x11/tint: update 0.12.12 -> 0.13

PR:		217583
Submitted by:	Yamagi <yamagi@yamagi.org> (maintainer)

Update x11/tint to 0.12.12

Slightly modified version of the one originally submitted in the PR.

PR:		216996
Submitted by:	yamagi@yamagi.org
Reported by:	yamagi@yamagi.org
Approved by:	yamagi@yamagi.org (maintainer), rakuco (mentor)

x11/tint: 0.12.9 -> 0.12.11

- Fixed crash in tint2conf when adding background
- Fixed crash in systray with non-Latin languagess
- Battery: do not show negative durations when the sensors return garbage
- Add missing dependencies

PR:		210204
Submitted by:	yamagi@yamagi.org (maintainer)

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

- Update to 0.12.9
- Add a missing example file
- Add INSTALLS_ICONS macro
- Add an NLS knob

PR:		        208921
Submitted by:	maintainer

Remove ${PORTSDIR}/ from dependencies, categories v, w, x, y, and z.

With hat:	portmgr
Sponsored by:	Absolight

x11/tint: 0.12.6 -> 0.12.7

Changes:
  https://gitlab.com/o9000/tint2/blob/0.12.7/ChangeLog
- Fix crash caused by race when reading inconsistent values for
  _NET_CURRENT_DESKTOP and _NET_NUMBER_OF_DESKTOPS
- Fix regression (all desktop tasks not working)
- Fix small memory leak in launcher

PR:		208112
Submitted by:	yamagi@yamagi.org (maintainer)

- Update to 0.12.6
- Adjust MASTER_SITES

PR:		206737
Submitted by:	<yamagi@yamagi.org> (maintainer)

Update to 0.12.3

PR:		205073
Submitted by:	<yamagi@yamagi.org> (maintainer)

- Update to 0.12.2
- Simplify passing etcdir to cmake

PR:		202542
Submitted by:	yamagi@yamagi.org (maintainer)

Update librsvg2 to 2.40.10.

Replace gtk20 dependancy with gdk-pixbuf2 and pango, and drop the
gtk-engines2 run dependacy.

Update ports to take the dependacy changes into account.

PR:		202378
Exp-run by:	antoine@

- Update to 0.12.1
- Use new mirror
- Adjust dependencies
- Rewrite options helper (remove DOCS and PYCONF options)
- Update WWW entry (pkg-descr), project is now hosted on GitLab.com

PR:		202137
Submitted by:	myself
Approved by:	yamagi (maintainer)

x11/tint: use options helpers and other goodies.

- Use OPTIONS helpers, PORTDOCS, PORTEXAMPLES, and shorten pkg-plist.

Approved by:	Yamagi (maintainer)

Cleanup plist

x11/tint: USES+= alias to fix battery indicator on DragonFly

- Remove Mk/bsd.efl.mk
- Convert USE_EFL=libtool_hack to USES=libtool
- Convert USE_EFL=imlib2 to LIB_DEPENDS=libImlib2.so:...
- Bump PORTVERSION in graphics/imlib2 and in all ports
  which depends on imlib2

PR:		196062
Approved by:	portmgr

- Convert ports from korean/, shells/, x11/, x11-clocks/, x11-fm/,
  x11-fonts/, x11-toolkits and x11-wm to new USES=python

Approved by:	portmgr (implicit)

Convert a bunch of USE_BZIP2 to USES=tar:bzip2

Approved by:	portmgr (not really, but touches unstaged ports)

Do not remove directory belonging to BSD.local.dist mtree

Reported by:	poudriere -cat
With hat:	portmgr

- Remove manual creation and removal of share/applications, as it's now in the
mtree (remaining categories)
- Add note on mtree change to CHANGES

Approved by:	portmgr (bdrewery)

Enable stage[1]
Use new LIB_DEPENDS format
Unsilent the install process
Use pkg-plist[1]
Use OPTIONS_SUB

PR:		ports/182928
Submitted by:	Yamagi Burmeister <yamagi@yamagi.org> (maintainer)

Add NO_STAGE all over the place in preparation for the staging support (cat:
x11)

Add explicit dependency on pkgconf
While here:
- trim headers
- convert USE_GMAKE to USES=gmake

- Remove MAKE_JOBS_SAFE variable

Approved by:	portmgr (bdrewery)

- convert USE_CMAKE to USES
- while here clean up some ports from CMAKE_VERBOSE, which is intended
  for users

Approved by:	portmgr (miwi)

- Add a patch to enable battery support [1]
- Don't depend depend on a specific library version
- Quiet install
- Bump PORTREVISION
- Pass maintainership to submitter

PR:		ports/175332 [1]
Submitted by:	Yamagi Burmeister <yamagi@yamagi.org>

Convert to new options framework

Feature safe:	yes

Throw my ports back in the pool, and make my intentions clear for the
various ports that I've created.

I bid fond fare well
A chapter closes for me
What opens for you?

/usr/local/share/applications should be PLIST_DIRSTRY

tintwizard.py requires pygtk2

PR:		ports/169989
Submitted by:	Yanhui Shen <shen.elf@gmail.com>

- update png to 1.5.10

Remove more tags from pkg-descr files fo the form:

- Name
em@i.l

or variations thereof. While I'm here also fix some whitespace and other
formatting errors, including moving WWW: to the last line in the file.

Use INSTALL_SCRIPT for the python script so STRIP is not attempted

The config tool needs gtk20

Thanks QAT!

Update to version 2-0.11, which contains improved transparency
support, and a graphical theme editor.

Add LICENSE information to my ports where the right answer is obvious

- Mark BROKEN on 6.X: does not link

Reported by:    pointyhat

Add xdamage and xcomposite dependencies

Update to version 2.09

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- update to jpeg-8

Update to tint2-0.7.1 which contains a minor systray fix.

Upgrade to version 2.07. There are a lot of new configuration options which
allow for some fairly cool effects. This version also adds a built in
systray functionality.

For the port, this version has switched to a GNU auto* format, so overhaul
accordingly. Also mod the source Makefile slightly to not install what we
would consider PORTDOCS by default.

Create a pkg-deinstall file to remove the ${X11BASE}/etc/xdg directory
if it's empty. I can't add it to PLIST_DIRS since other ports add stuff
there.

Add xrandr to the list of dependencies.

Submitted by:   Ion-tindy

Tint is a simple panel/taskbar intentionally made for openbox3, but should
also work with other window managers.

The goal is to keep a clean and unintrusive look with lightweight code and
compliance with freedesktop specifications.

Tint taskbar features
    * color/transparency on font, icon, border and background
    * customize mouse event
    * drag and drop task between desktop and switch desktop

Tint panel features
    * clock with font, color and transparency
    * multi-monitor : panel position adjust to monitor, taskbar by monitor

WWW:    http://code.google.com/p/tint2/