libftdi1 - A library (using libusb) to talk to FTDI's FT2232C,
FT232BM and FT245BM type chips including the popular bitbang mode.
Note: When you get a -5 error "can't claim usb device" during
ftdi_usb_open(), make sure the kernel ftdi_sio driver is unloaded.
===> The following configuration options are available for libftdi1-1.5_9:
BOOST=on: Build with boost
DOCS=on: Build and/or install documentation
EXAMPLES=on: Build and/or install examples
PYTHON=on: Build Python bindings
===> Use 'make config' to modify these settings
devel/libftdi1: prepare for boost 1.89
With boost 1.89, libboost_system, which is already an empty dummy
library will finally go away. Turn the boost dependency into a build
time dependency as no boost library is required at runtime.
Consumers of <ftdi.hpp> will have to depend on boost-libs at build time
to get the necessary headers, but a library dependency can be avoided
in many cases.
Approved by: bofh (maintainer)
MFH: 2025Q3
*/*: Sunset 12.4-RELEASE/12-STABLE from ports tree
- Remove all references to defunct ARCH arm
- Remove all references to defunct ARCH sparc64
- Remove x11-drivers/xf86-video-sunffb which requires defunct sparc64
ARCH
- Remove sysutils/afbinit requires defunct sparc64 ARCH
- Remove all references to bktr driver
- Remove all references to defunct FreeBSD_12
- Remove all references to OSVERSION/OSREL corresponding to 12
- Remove conditionals in Mk/Uses/cabal.mk
- Remove sparc reference from Mk/Uses/qt-dist.mk
- Remove BROKEN_sparc64/NOT_FOR_ARCH=sparc64
- Remove BROKEN_FreeBSD_12* from:
- Remove OpenSSL patches from:
- Remove conditional flags for OSVERSION >= 1300000 to fixed flags.
Also move conditional flags for non sparc64/arm ARCH to fixed flags.
Reviewed by: brooks, jbeich, rene, salvadore
Differential Revision: https://reviews.freebsd.org/D42068
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
- Update MASTER_SITES to https
- Switch to options helpers, CMAKE_BOOL, PORTEXAMPLES
- Install examples into designated EXAMPLESDIR, instead of bin/
- Fix inability to enable PYTHON and DOCS at the same time
PR: 252922
Submitted by: amdmi3
Approved by: maintainer timeout (bsam, 2 weeks)
devel/libftdi1: Update to version 1.5 and:
- mark dual licensed;
- regenerate patches;
- pet portlint (shuffle some Makefile lines).
New in 1.5 - 2020-07-07
-----------------------
* Implement tc[io]flush methods & deprecate broken purge_buffers methods
Please check your code for ftdi_usb_purge_rx_buffer(),
ftdi_usb_purge_tx_buffer() and ftdi_usb_purge_buffers()
and migrate to the new ftdi_tc[io]flush() methods.
Old code will continue to function, but you'll get
(Only the first 15 lines of the commit message are shown above )
Bump PORTREVISION for ports depending on the canonical version of GCC
as defined in Mk/bsd.default-versions.mk which has moved from GCC 8.3
to GCC 9.1 under most circumstances now after revision 507371.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, everything INDEX-11 shows with a dependency on lang/gcc9 now.
PR: 238330
Change cmake default behaviour to outsource.
Ports that build out of source now simply can use "USES=cmake"
instead of "USES=cmake:outsource". Ports that fail to build
out of source now need to specify "USES=cmake:insource".
I tried to only set insource where explictely needed.
PR: 232038
Exp-run by: antoine
Bump PORTREVISION for ports depending on the canonical version of GCC
defined via Mk/bsd.default-versions.mk which has moved from GCC 7.4 t
GCC 8.2 under most circumstances.
This includes ports
- with USE_GCC=yes or USE_GCC=any,
- with USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and
- with USES=compiler specifying openmp, nestedfct, c11, c++0x, c++11-lang,
c++11-lib, c++14-lang, c++17-lang, or gcc-c++11-lib
plus, as a double check, everything INDEX-11 showed depending on lang/gcc7.
PR: 231590
Bump PORTREVISION for ports depending on the canonical version of GCC
in the ports tree (via Mk/bsd.default-versions.mk and lang/gcc) which
has now moved from GCC 6 to GCC 7 by default.
This includes ports
- featuring USE_GCC=yes or USE_GCC=any,
- featuring USES=fortran,
- using Mk/bsd.octave.mk which in turn features USES=fortran, and those
- with USES=compiler specifying one of openmp, nestedfct, c11, c++0x,
c++11-lib, c++11-lang, c++14-lang, c++17-lang, or gcc-c++11-lib.
PR: 222542
Adjust USES to fix builds on gcc-based architectures.
While here, pet portlint.
Tested for no regression on amd64.
Approved by: portmgr (tier-2 blanket)
devel/libftdi1: DOCS and PYTHON options can not be used together.
PR: 219013
Submitted by: drhowarddrfine@charter.net
Patch by: w.schwarzenfeld@utanet.at
Add USES=pathfix support for CMake. Some ports that use CMake to build
already had USES=pathfix, although it did nothing. For those ports, I
either removed it as they were handling the pkgconfig files differently
or I removed patches and substitutions that accomplished the same thing
as pathfix.
Differential Revision: https://reviews.freebsd.org/D850
Reviewed by: antoine, bapt, tijl
Approved by: portmgr (bapt)
New port: devel/libftdi1
Talking to FTDI's FT2232C, FT232BM and FT245BM type chips including
the popular bitbang mode, using libusb.
WWW: http://www.intra2net.com/en/developer/libftdi/
Please note that this is an updated version of devel/libftdi,
but dependencies require both versions to be available for a while.
PR: 191656
Submitted by: uffe@uffe.org
