*/*: Bump consumers of liba52

lang/fpc: Refresh mirrorlist for source tarball

Remove dead mirrors and use SourceForge as primary
While at it, switch ftp mirror to https

Approved by:	portmgr (blanket, infrastructure)

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

lang: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Alex Dupre <ale@FreeBSD.org>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Alonso Cardenas Marquez <acm@FreeBSD.org>
  *  Andreas Klemm <andreas@klemm.gtn.com>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrey Zakhvatov
  *  Anton Berezin <tobez@FreeBSD.org>
  *  Anton Berezin <tobez@tobez.org>

lang/fpc: Fix build issues building some fpc based apps

- Add missing parameter to getdirentries syscall function
- Re-build i386 and amd64 bootstrap
- Revert fpc-i386 (FPC_USE_LIBC) build to syscall build
- Bump PORTREVISION in all ports dependant of freepascal compiler

lang/fpc-*: Update bootstrap to 3.2.2

- Update i386 and amd64 bootstrap to 3.2.2
- Fix issues with new stat struct
- Now i386 is build using FPC_USE_LIBC
- Fix build on i386 when FPC_USE_LIBC is used
- Update fpc source code to newer kernel syscalls. It removes COMPAT11
  dependency. Now these ports support FreeBSD >= 12.x
- Bump PORTREVISION

lang/fpc: Fix build issue on lazarus i386 and amd64

- Bump PORTREVISION
- Disable some default OPTIONS
Obtained
from:	https://forum.lazarus.freepascal.org/index.php/topic,57752.msg429737.html#msg429737

lang/fpc: unbreak on i386 after e40d870fc3cb

$ make checksum ARCH=i386
===>   fpc-3.2.2 depends on file: /usr/local/sbin/pkg - found
=> freepascal/ppc386-3.0.4-freebsd.tar.gz is not in
/usr/ports/lang/fpc/distinfo.
=> Either /usr/ports/lang/fpc/distinfo is out of date, or
=> freepascal/ppc386-3.0.4-freebsd.tar.gz is spelled incorrectly.
*** Error code 1

lang/fpc: update to 3.2.2

* Add new unit devel/fpc-tplylib
* Remove COMPAT10 dependency  [PR/254481]
PR:		254481
Reported by:	jbeich

Remove # $FreeBSD$ from Makefiles.

- lang/fpc revert way like linker is taken by fpc compiler
- lang/fpc add binutils to RUN_DEPENDS
- editors/lazarus add binutils to RUN_DEPENDS
- editors/lazarus add gmake to RUN_DEPENDS
- editors/lazarus install fpc units like RUN_DEPENDS too
- Bump PORTREVISiON of fpc/lazarus ports

PR:		251712
Reported by:	amdmi3

- Commit forgotten  changes

- Update to 3.2.0

ChangeLog at:	https://wiki.freepascal.org/FPC_New_Features_3.2.0

graphics/proj: Update to 7.2.0

Changelog:
  - https://proj.org/news.html#release-notes

graphics/proj: Update to 7.1.1

- Add a pkg-message explaining how to access or sync datum grids from the CDN
  (disabled by default)
- Add curl and tiff dependencies since proj can read datum grids from remote
  COG (Cloud Optimized Geotiff)
- Take maintainer'ship (ok wen@)

PR:		245611
Submitted by:	wen (first version)
Reviewed by:	wen, rhurlin
Approved by:	wen
Exp-run by:	antoine

- Remove compat < 11 dependencies from bootstrap and compiler. It could fix
problems
  when GENERIC kernel is not used.
- Rebuild bootstrap (ppcx64 and ppc386) with new changes
- Bump PORTREVISION

PR:		239135
Reported by:	fbsdbugs4  at  sentry.org

- Change LDPATH to FPC_LDPATH into lang/fpc/Makefile. It can be changed from
  /etc/make.conf
- Add FPC_LDPATH to freepascal compiler. By default it is defined to
  %%LOCALBASE%%/bin/ld.bfd but it can be changed setting FPC_LDPATH environment
  variable
- Remove compatX dependencies from bootstrap and compiler. It could fix problems
  when GENERIC kernel is not used [1]
- Rebuild bootstrap (ppcx64 and ppc386) with new changes
- Bump PORTREVISION

PR:		239135
Submitted by:	fbsdbugs4 __at__ sentry.org

- Rebuild bootstrap (ppcx64 and ppc386) with ld patches
- Fix build on 12-STABLE and CURRENT (amd64 and i386)
- Bump PORTREVISION for all ports that depends of lang/fpc
- Add USE_BINUTILS to fpc and lazarus based ports
- Add binutils dependency to Uses/fpc.mk and Uses/lazarus.mk

PR:		240293 239934 233413 214864
Exp-run by:	antoine

- Add new fpc bootstrap (i386 and x86_64). It could need less COMPATX
  dependencies in kernel
- Add patch file to solve some linking problem
- Remove LD_UNSAFE. Now it can be defined via LDPATH (/usr/bin/ld.bfd by
  default). fpc is not working with lld. We will use binutils-ports when
  ld.bfd is moved from base if lld not working on future version
  of fpc
- Bump PORTREVISION

onvert to UCL & cleanup pkg-message (categories l-m)

lang/fpc: Revert the LICENSE change because it conflicts with slave ports

Reported by:	acm

lang/fpc: Add LICENSE/LICENSE_FILE; Order ONLY_FOR_ARCHS

Approved by:	portmgr blanket

- Fix typos

PR:		218214
Submitted by:	aaa5500 .at. ya.ru

- Migrate Mk/bsd.fpc.mk to Mk/Uses/fpc.mk
- Convert all fpc-based ports to USES=fpc

PR:             227210
Reviewed by:    portmgr
Approved by:    portmgr
Exp-run by:     antoine
Differential Revision:  https://reviews.freebsd.org/D14617

lang/fpc: Set LLD_UNSAFE

fpc produces and needs to link an object file with invalid section
header alignment, which lld refuses to do.  The build fails with:

/usr/bin/ld: error: x86_64/units/x86_64-freebsd/i_linux.o: \
    invalid alignment of section headers

Setting LLD_UNSAFE makes the port link with ld.bfd instead.

PR:		222172
Approved by:	portmgr (LLD_UNSAFE blanket)
Sponsored by:	The FreeBSD Foundation

Do not override PLIST_SUB set by the framework

Reported by:	pkg-fallout (via fpc-symbolic)

- Fix distinfo

- Update to 3.0.4
- Connect www/fpc-libmicrohttpd

Revert recent fpc changes, they were obviously untested

With hat:	portmgr

- Update to 3.0.4
- Link www/fpc-libmicrohttpd

Remove support for variables that have been deprecated for a while.

variables                  deprecation       revision
WITHOUT_NLS                2013-12-13        r336337
WITH_/WITHOUT_             2014-02-24        r345870
NOPORT(DOC|EXAMPLE)S       2014-04-19        r351587
WITH_BDB_VER               2016-05-02        r414444
OVERRIDE_LINUX_BASE_PORT   2016-09-05        r421387
WITH_OPENSSL_(BASE|PORT)   2016-06-16        r416965

While there, add an ERROR variable that works like DEV_ERROR, but for
user facing errors, and move NOPORTDOCS,
NOPORTEXAMPLES and WITHOUT_NLS to it.

Cleanup bsd.sanity.mk a bit.

Fix fallout.

PR:		224613
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D13490

- Pass maintainership to me. marino@ is not part of FreeBSD committers

- Update WWW

Approved by:	portmgr blanket

- Freepascal update to 3.0.2
- Lazarus BUMP PORTREVISION
- Connect www/fpc-googleapi and devel/fpc-fcl-pdf

- Install serial .ppu and .o files
- Bump fpc-rtl-extra PORTREVISION

${RM} already has -f.

PR:		213570
Submitted by:	mat
Exp-run by:	antoine
Sponsored by:	Absolight

- update libgd to 2.2.2
- new MASTER_SITES
- add security patch
PR:		210913
Submitted by:	Piotr Kubaj
MFH:		2016Q3
Security: CVE-2015-8874
Security: CVE-2016-3074
Security: http://www.openwall.com/lists/oss-security/2016/07/12/4

- Fix trailing whitespace in pkg-messages

Approved by:	portmgr blanket

lang/fpc: Restore DragonFly support

FPC cannot use the gold linker.  Gold requires that the linker script have
the --script flag passed, but doing so will break FreePascal (the flags
causes the internal linker to be bypassed).  Since DragonFly switches
linkers through the environment and it's not clear how to set that, I've
hardcoded the linker path for DragonFly for now.  Also, we must avoid using
Gold for the bootstrap compiler (which has not been hardcoded) so passing
LDVER=ld.bfd during the bootstrap stage is necessary to guarantee this.
FreeBSD doesn't use this variable so its harmless on that OPSYS.

The other major fix was fixing the dirent record which differs on DragonFly.
This is why unit searching has always failed.

All patches will be submitted upstream.  This should be a no-op for FreeBSD,
thus no bump.

Don't use GH_TAGNAME when DISTVERSION* variables can be used.

With hat:	portmgr
Sponsored by:	Absolight

FPC ecosystem: Upgrade version 2.6.4 => 3.0.0

This is the first major release of FreePascal in nearly four years.
There are a ton of new features, way more to list here. see:
http://wiki.freepascal.org/FPC_New_Features_3.0

Several new unit ports were added, some were contracted.  Most of
those were absorbed into the main FPC packages, but two units are
no longer supported: sndfile and matroshka.

All 99 remaining ports (including Lazarus ports) were build tested
on FreeBSD i386 and amd64 Release 10.2

Remove UNIQUENAME and LATEST_LINK.

UNIQUENAME was never unique, it was only used by USE_LDCONFIG and now,
we won't have conflicts there.

Use PKGBASE instead of LATEST_LINK in PKGLATESTFILE, the *only* consumer
is pkg-devel, and it works just fine without LATEST_LINK as pkg-devel
has the correct PKGNAME anyway.

Now that UNIQUENAME is gone, OPTIONSFILE is too. (it's been called
OPTIONS_FILE now.)

Reviewed by:	antoine, bapt
Exp-run by:	antoine
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D3336

Revert part of r376655 that is breaks freebsd ports

With hat:	portmgr

lang/fpc: Remove unnecessarily variable substition and EXTRACT_SUFX

There were several substitions like "${XXX:S/$/.something/} which is the
equivalent of appending, e.g. "${XXX}.something".

So for the sake of comprehension, change these to appends, and also just
hardcode ".tar.gz" instead of using ${EXTRACT_SUFX} for the same reason.
Since the distfiles are being manually defined, there's no real purpose
to have a variable in the name, and if the EXTRACT_SUFX changes for any
reason (say a new distfile with a different suffix requiring USES+=tar),
then the code actually breaks.  These changes make the code easier to
read, comprehend, and arguably makes the port more robust.

lang/fpc: Remove googlecode from MASTER_SITES

The googlecode URL only provides 2.6.0 and 2.6.2 versions of the man pages
and bootstrap compiler, but not the current 2.6.4, so remove those urls.

While here, simplify the LOCAL distcache site urls.  The substition is not
necessary.

lang/fpc: Prepare for 3.0 and the use of older bootstrap

The Free Pascal Compiler port currently mandates that the bootstrap
compiler be the same version of the compiler being built.  This means that
every update requires a new bootstrap compiler to be generated before the
update.  This goes against the philosophy of a bootstrap compiler, which
aims to allow older compilers to build self-hosting modern compilers.  FPC
is capable of this, but the feature wasn't being leveraged.

There are a lot of changes in this commit, but I believe the resulting
compiler is the same as before the commit, thus PORTREVISION has not been
bumped.  Changes include:

  * Add DragonFly bootstrap compiler 2.6.4 to list of distfiles
  * use OPSYS to make builds generic between FreeBSD and DragonFly

Assign maintainership of FPC ports to new FPC ports team

The new team currently consists of the previous maintainer (acm@) and
myself (marino@).

PR:	195363

- Use proper command for manpage installation
- Strip binaries

Approved by:	bapt

Simplify plist

Cleanup plist

lang/fpc: IGNORE on DragonFly (for now, support is long-term goal)

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

- Update to 2.6.4

Stage support

- remove reference to /usr/X11R6 in pkg-message

PR:		185127
Submitted by:	crees
Approved by:	maintainer timeout (1 month)

Stage support

Fix properties on pkg-plist

Convert the tree to USES=openal

Approved by:	portmgr (bapt)

- Fix static linking issues on amd64
- Bump PORTREVISION

Add NO_STAGE all over the place in preparation for the staging support (cat:
lang)

Teach fpc not to try to link to libiconv on head after the iconv change.

This fixes the lang/fpc-utils port build.

Bump PORTREVISION due to runtime behaviour change on head.

Approved by:	portmgr (bapt, implicit)

- update libdg to 2.1.0

- Update to 7.31.0
- Bump PORTREVISION for ftp/curl shlib change
- Add TEST_DEPENDS
- Convert to new options framework
- Adjust options:
  - Add COOKIES
  - Add CYASSL, NSS, POLARSSL, THREADED_RESOLVER, TLS_SRP [1]
  - Add GSSAPI and SPNEGO [2]
  - Remove KERBEROS4
  - Rename LIBIDN to IDN
  - Remove TRACKMEMORY [1]
- Sort option handler
- Add SLAVEDIRS: ftp/curl-hiphop
- Cosmetic change
- Cleanup Makefile header
- While I'm here, fix typo (PORTREVSION) in x11-wm/ede/Makefile

Changes:	http://curl.haxx.se/changes.html
PR:		ports/172325 (-exp run), ports/177369 (based on) [1]
Submitted by:	Hirohisa Yamaguchi <umq@ueo.co.jp> [1], hrs (via email) [2]
Exp run by:	miwi

Rely on bsdtar to autodetermine the format of the distfiles when possible

For a while now bsdtar is able to autotermine compression and archive format.
Let's then use tar directly instead of piping to tar.

Now USE_BZIP2 and USE_XZ only set EXTRACT_SUFX to the right format

Convert the last USE_ICONV to USES=iconv

- Update to 2.6.2
- Trim Makefile headers

In categories starting with [h-m], remove empty lines from pkg-plist (and
purge one empty file).

- Fix editors/fpc-ide

- Now freepascal units respect LOCALBASE

PR:		ports/153567
Submitted by:	amdmi3

- update png to 1.5.10

- Fix install

Reported by:    pav

- Fix a problem when fpc.cfg is removed on deinstall time
- Bump PORTREVISION

Reported by:    erwin

- Add ${LOCALBASE}/lib/qt4 path to fpc.cfg config file
- Bump PORTREVISION

- Use USE_XORG instead of USE_XLIB

Suggested by:   bapt

- Update to 2.6.0

- Chase unixODBC shlib bump

- change required APACHE version from 13+ to 20+
  (prepare to remove www/apache13)

- no PORTREVISION bump since apache22 is the default

with hat apache@

- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)

Suggestions and patches from:   ache, C. Burns, wen

- Track dependencies after databases/gdbm update

- Chase x11-toolkits/xforms shlib version bump

Last commit message is wrong!

New commit message:
- Fix: comments should begin with the line whithout whitespaces in front.

- set EXPIRATION_DATE to "one week after FreeBSD 9.0-RELEASE-p0"

with hat apache@

- Update to 2.4.4

- DISTNAME= ${PORTNAME}-${PORTVERSION} is the default and not needed.

PR:             ports/153292
Submitted by:   myself (pgollucci)
Tested by:      -exp run by pav
Approved by:    portmgr (pav)

- Fix distinfo entry

Reported by:    sahil

- Update to 2.4.2

See changelog at: http://wiki.freepascal.org/User_Changes_2.4.2

- Change s/LIB_DEPENDS/RUN_DEPENDS on rexx-regina dependency. It solves a
  problem with rexx-regina install detection

Reported by:    QAT

- s/NOPORTSDOCS/NOPORTDOCS

Reported by:    QAT

- Update to 2.4.0
- Add support for amd64 [1]
- Add 23 new ports to  to bsd.fpc.mk
- Remove obsolete patch file patch-packages-fcl-db_Makefile
- Turn off some optional dependencies like databases/unixODBC,
  graphics/svgalib, databases/oracle8-client for avoid break amd64 support
- Clean up

PR:     ports/146001
Submmitted by:  Christopher Key <cjk32__ at _cam.ac.uk>
Patch reviewed by:      marcov_ at _pascalprogramming.com (fpc developer)[1]

Chase the ftp/curl shlib version bump.

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Fix some more SF URLs, including ones in PATCH_SITES and comments (for
consistency)

Approved by:    portmgr (pav)

- Chase fftw3 update

- Fix all MASTER_SITES entries. Now it will compile without problems

Reported by:    Zahemszky Gábor <Gabor __ at__zahemszky.hu> via email

- Update to 2.2.4
- Add convertors/fpc-iconvenc port to bsd.fpc.mk
- pkg-plist fixes

- Update X.org ports to 7.4+ (few ports are more recent than the katamari).
- Bump PORTREVISION for all ports depending on libglut since the shlib
version number went from 4 to 3.
- Bump PORTREVISION for all ports depending on libXaw as libXaw.so.8 isn't
installed anymore.
- Couple of ports fixes (mostly missing xorg components added to USE_XORG).

Bump the version of the curl shared library after the ftp/curl update
to 7.19.2.
Bump PORTREVISION, even on the ports that do not have a versioned
dependency, since the binaries will most probably still stop working.

- Remove example files from fpc-gtk1 and fpc-gtk2 ports. It can be
  obtained from fpc-source into distfiles directory.

- Update to 2.2.2