Remove .1  from GraphicsMagick, as octave doesn't require
paticular version.

Submitted by:	Scott Bennett <bennett@cs.niu.edu>

Update PCRE to 8.32
Introduces the UTF-32 library pcre32
Bump PORTREVISION in dependent ports

update to 3.6.3

Feature safe: yes

- update png to 1.5.10

Update to 3.6.1.

Bump pcre library dependency due to 8.30 update

Fix link against libumfpack.
Bump port revision.

PR:             162988
Submitted by:   Jason Bacon <jwbacon@tds.net>
Feature safe:   yes

adjust linking and comments in dependent ports after the math/atlas update;
math/atlas-devel will be updated to use the same constructs at a later date

PR:             162706
Approved by:    miwi (portmgr)
Feature safe:   yes

update to 3.4.3.
Feature safe:   yes

- update fftw3* to 3.3 [1], and adjust dependent ports
- make use of optimizations by default, where possible
(quad flavor to follow shortly, and mpi at a later date)

Suggestions and patches from:   ache, C. Burns, wen

- LIB_DEPENDS qhull -> qhull5
- Bump portrevision

PR:             ports/161089

- Add LDFLAGS to CONFIGURE_ENV and MAKE_ENV (as it was done with LDFLAGS)
- Fix all ports that add {CPP,LD}FLAGS to *_ENV to modify flags instead

PR:             157936
Submitted by:   myself
Exp-runs by:    pav
Approved by:    pav

Better pkg-plist generation, making octave and octave-forge more
orthogonal.

Discussion with: stephen@

- Bump PORTREVISION for science/hdf5-18 shlib change

- Add missing items in pkg-plist.
- Portlint.
- Bump portrevision.

Approved by:    maho (mentor) and maho (maintainer)

Update to 3.4.2.

Update to 3.4.1.

Add a make target called "check"
you can now check octave port by
$ make check
. [1]

Note: 10 tests failed on FreeBSD 8.1/RELEASE amd64.

Discussion with @tmacchant via twitter

Chase glpk shlib version bump.

Remove legacy dependency to science/hdf5,
and bump portrevision (may not be required, though.)

PR:             156940
Submitted by:   Stephen Montgomery-Smith <stephen@missouri.edu>

update to 3.4.0

PR:             156603
Submitted by:   Stephen Montgomery-Smith <stephen@missouri.edu>

- Get Rid MD5 support

Sync to new bsd.autotools.mk

Punt autoconf267->autoconf268

Autotools update.   Read ports/UPDATING 20100915 for details.

Approved by:    portmgr (for Mk/bsd.port.mk part)
Tested by:      Multiple -exp runs

Add option to allow build with either hdf v1.6 or 1.8.
Build with 1.6 by default, since most of the ports still depend on legacy hdf5.

PR:             ports/148496
Submitted by:   makc@
Approved by:    maintainer timeout (three weeks)

- update to 1.4.1
Reviewed by:    exp8 run on pointyhat
Supported by:   miwi

- Chase x11-toolkits/fltk update

Chase glpk shlib version.

Update to 2.3.4. (this is a bugfix release)

quoting from http://www.gnu.org/software/octave/
> January 28, 2010
>    Version 3.2.4 has been released and is now available for ftp.
> Octave 3.2.4 is a bug-fixing release NEWS file for a
> list of user-visible changes in the 3.2.x series.

Feature safe:   yes

Build fix gotoblas.

Feature safe:   yes

- update to jpeg-8

Chase glpk shlib version.
Bump PORTREVISION.

Update to 3.2.3.

Feature safe:   yes

Unbreak. Now it builds.
Feature safe:   yes

- Mark BROKEN - does not build:
  /libexec/ld-elf.so.1: /usr/lib/libstdc++.so.6: version GLIBCXX_3.4.11 required
by ./gendoc not found

Reported by:    pointyhat
Feature safe:   yes

Bump PORTREVISION for everything that sets USE_FORTRAN=yes which now
implies lang/gcc44 up from lang/gcc43.

Approved by:    portmgr

Chase glpk shlib version bump;
PORTREVISION++.

- Fix pkg-plist
- Bump PORTREVSION

Detect arpack correctly for BLAS and ATLAS, and bump port revision.

Submitted by:    Robert Jenssen <robertjenssen@ozemail.com.au>

Remove metis include dir.

Add dependency to math/qrupdate, and bump portrevision.

Update to 3.2.2.

- bump all port that indirectly depends on libjpeg and have not yet been bumped
or updated
Requested by:   edwin

Chase glpk shlib version.

Bump port revision accordingly. (it should only affects to FSBD6 though)

Fix a commit for prior than FBSD7.
Original patch has been slighlty modified.
PR:             127491
Submitted by:   Stephen Montgomery-Smith

Fix pkg-plist and bump portrevision.

Submitted by:   Stephen Montgomery-Smith
Approved by:    portmgr (pav)

Update to 3.0.5.

Update to 3.0.5.

Bump glpk shlib version.

Fix build with suitesparse 3.2.
patch is obtained from
http://hg.tw-math.de/release-3-0-x/rev/712d9e045b1e
.

* Remove direct dependency to gcc42. now USE_FORTRAN implies
  RUN_DEPENDS as well. (now points to gcc43, though).
* Bump portrevision.

Submitted by:   pav, gerald

- Remove conditional checks for FreeBSD 5.x and older

Chase glpk shlib version bump.

Fix latest link.

PR:             128706
Submitted by:   Stephen Montgomery-Smith <stephen@math.missouri.edu>

Chase glpk shlib version, bump PORTREVISION.

Update to 3.0.3.

Add gcc42 dependency at runtime.

Fix pkg-plist, and bump portrevision.

Update to 3.0.2, and sort pkg-plist.

Chase glpk shlib version.

Recognize the -pthread flag, and bump port revision.

PR:             126899
Submitted by:   Stephen Montgomery-Smith <stephen@math.missouri.edu>

Bump portrevision due to the shared lib update
of glpk.

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

Chase glpk shlib version bump.

Bump portresivion after a fix of pkg-plist.

Submitted by:   erwin

Fix pkg-plist.

Submitted by:   pav

- Remove duplicates from MAKE_ENV after inclusion of CC and CXX in default
MAKE_ENV

Fix build.

Spotted by: itetcu

Fix build with
NOPORTDOCS=yes,  NOPORTEXAMPLES=yes, NOPORTDATA=yes, FORCE_PACKAGE=yes

Spotted by: itetcu

Fix build.
Submitted by:   itetcu, pav, erwin

Update to 3.0.1

Chase glpk shared library version.

Fix dependency and bump portrevision.

PR:             124386
Submitted by:   Max Brazhnikov

Better BLAS/LAPACK support.

Since bsdtar can detect the type of file it's extracting, simplify
handling of compressed tarballs and zip files.

Approved by:    maho (maintainer)

1. FreeBSD tar requires extra switches to read the archive from stdin.
2. Fix installation of packages from octave-forge. make is not GNU make.
3. Bump portrevision accordingly.

Submitted by:   Ryan Hinton <rwh4s@virginia.edu>

Use the C++ compiler for linking liboctinterp.so in order
to avoid lots of "Undefined symbol" errors also the tests passes.

Submitted by:   Ryan Hinton <rwh4s@virginia.edu>

Use termios terminal interface, so that COMPAT_43TTY kernel
option can be removed without strange side-effects.

Submitted by:   Ed Schouten <ed@fxq.nl>

Bump port revision by former commit.

Submitted by:   pav

Add gsed in the RUN_DEPEND section.
mkoctfile requres gsed.

Submitted by:   pav

Update to 3.0.0, and grab maintainership.

Remove always-false/true conditions based on OSVERSION 500000

Now we use USE_FORTRAN=yes to use FORTRAN compiler.

Reset rainer.alves@gmail.com by request due to current lack of time to
work on FreeBSD.

- Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.

- atlas and blas library number are bumped to 2

Forgotten by:   maho

* Migrate to gfortran.
* Bump port revision.

Approved by:    portmgr(kris)

- Add more MASTER_SITES [1]
- portlint and remove duplicated 5.x directive [1]
- Use %%DATADIR%% in pkg-plist [1]
- Take maintainer [1]
- Make it possible to build w/o math/atlas. Now use math/blas as default,
instead of math/atlas. [2]

PR:             97199 [1], 100330 [2]
Submitted by:   Rainer Alves <rainer.alves___gmail.com> [1], trasz
<trasz___pin.if.uz.zgora.pl> [2]

octave executable is now installed under libexec,
so that we can install multiple versions of octaves.
(esp for upcoming math/octave-devel port)

Update to 2.1.73

This commit is a result of hacks at the CodeFest Akihabara 2006 hosted by FSIJ.

Replace ugly "@unexec rmdir %D... 2>/dev/null || true" with @dirrmtry

Approved by:    krion@
PR:             ports/88711 (related)

- Add SHA256

Fix pkg-plist when both octave and octave-forge are
installed

Fix package list

[1]:
  - Update to 2.1.71
  - Use ${INFO}

Moreover:
  - Polish the Makefile

PR:             ports/81482 [1]
Submitted by:   Johan van Selst <johans@stack.nl> [1]

BROKEN on 5.x: Does not compile

Approved by:    portmgr (self)

- Use more graceful way to unbreak on amd64

PR:             ports/74669
Submitted by:   Roland Smith <rsmith(at)xs4all.nl>

BROKEN on 4.x: Does not compile

Unbreak on AMD64 by linking libglob statically vs. dynamically until the
PIC issues are properly dealt with.

Submitted by:   Roland Smith <rsmith@xs4all.nl>