Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

textproc/groff: allow to build preconv(1) without encoding autodetection

After commit f515b0e657e7, I've received another complaint that, quote,
"the number of dependencies of [this] groff thing is quite unreasonable"
and entails installing e.g. Ninja and Meson, which in turn pulls Python,
etc.  This happens because `textproc/uchardet' which can be used by the
preconv(1) utility for automatic encoding detection is built with CMake.

As this dependency is optional upstream, allow conservative ports users
to disable it and thus avoid pulling CMake and all that stuff.

textproc: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Choe, Cheng-Dae" whitekid
  *  -
  *  <glewis@FreeBSD.org>
  *  <koshy@india.hp.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Aaron Dalton <aaron@daltons.ca>
  *  Aaron Straup Cope
  *  Aaron Straup Cope <ascope@cpan.org>
  *  Ache
  *  Adam Herzog <adam@herzogdesigns.com>
  *  Adam Weinberger <adamw@FreeBSD.org>

Fix CONFLICTS entries of multiple ports

There have been lots of missing CONFLICTS_INSTALL entries, either
because conflicting ports were added without updating existing ports,
due to name changes of generated packages, due to mis-understanding
the format and semantics of the conflicts entries, or just due to
typoes in package names.

This patch is the result of a comparison of all files contained in
the official packages with each other. This comparison was based on
packages built with default options and may therefore have missed
further conflicts with optionally installed files.

Where possible, version numbers in conflicts entries have been
generalized, some times taking advantage of the fact that a port

*/*: Remove redundant '-[0-9]*' from CONFLICTS

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".

Approved by:	portmgr (blanket)

textproc/groff: enforce iconv from ports

groff silently links to iconv from ports, declare properly the
dependency

all: Remove all other $FreeBSD keywords.

Remove # $FreeBSD$ from Makefiles.

Drop workaround for qemu-user-static hang after r517350

GSlice as used by qemu-user still aborts due to low RLIMIT_VMEM in an
emulated application but no longer hangs. While the behavior differs
from real hardware it matches the one from before r456518 that was
hardcoded as gl_cv_func_printf_enomem=no workaround.

PR:		224740

groff: remove X11 option and dependency

Now that groff is required for manpages that are not supported by mandoc
the default dependency on X11 has become a big concern for many people.

From now the entire X11 option has been removed as it is only needed for
legacy part of groff that have little end user value.

The other part that was dragging in all the X11 dependencies was the ghostscript
dependency which is needed for 2 cases:
1. find the path of the urw fonts which is needed for pdf generation. the
configure script has been patched to stop using ghostscript to find that path,
but directly use the one provided.
2. the html driver which calls at runtime the gs binary along with some binaries
provided by the netpbm package. Given how little use it is, add a message to
tell the users to manually install ghostscript and netpbm as optional dependency
if they do need to use groff -Thtml.

Requested by:	many

Fix groff build with libc++ 9.0.0

Because libc++ 9.0.0 now includes <math.h> from <stdlib.h>, groff fails
to build with an error similar to:

In file included from src/libs/libgroff/assert.cpp:20:
In file included from /usr/include/c++/v1/stdlib.h:100:
./lib/math.h:38:3: error: "Please include config.h first."
 #error "Please include config.h first."
  ^
./lib/math.h:40:1: error: unknown type name '_GL_INLINE_HEADER_BEGIN'
_GL_INLINE_HEADER_BEGIN
^

Fix this in the least intrusive way, by simply including config.h
instead of emitting an error message.

Approved by:	bapt (maintainer)
PR:		240701
MFH:		2019Q3

textproc/groff: Fix build/packaging with URWFONTS disabled

With URWFONTS disabled, the groff build fails:

pdfroff: installation problem: cannot find GhostScript interpreter

*** FATAL INSTALLATION ERROR ***

'pdfroff' requires a GhostScript interpreter to convert PostScript to PDF.
Since you do not appear to have one installed, 'pdfroff' connot continue.

This change provides configure with a more explicit argument to disable
ghostscript, vs the CONFIGURE_ENV method [1] introduced in ports 499077
after ports r499075 introduced the option.

Update pkg-plist to mark files not conditional on this option.

PR:		237615
Submitted by:	<fullermd over-yonder net> [1]
Approved by:	portmgr (blanket: build fix, just fix it)
MFH:		no (not affected)

Fix configure still detecting ghostscript if installed and URWFONTS disabled
Fix plist when URWFONTS is disabled

Reported by:	Zeus Panchenko <zeus@ibs.dn.ua>

Add a new option URWFONTS

This options allows to disable at build time dependency on gsfonts and
ghostcript, to reduce the number of dependency for minimal setup.

Note that ghostscript and gsfonts are only needed at build time otherwise (mark
ghostscritp as such in any case now) and they are needed for some usage of
gropdf.

Reported by:	Zeus Panchenko <zeus@ibs.dn.ua>

textproc/groff: unhang on qemu-aarch64-static after r488509

checking whether printf survives out-of-memory conditions...

PR:		224740

Groff now requires texinfo to be installed to build

Update to 1.22.4

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

Add build dependency on print/gsfonts.  This used to be pulled in by
Ghostscript.

Reported by:	antoine

Fix broken build since r441842 (May 27, 2017). Add missing %%HTMLDOCS%%
tag to webpage-17.html plist entry.

PR:		220196, 220856

textproc/groff: lift BROKEN after r441842

PR:		220731
Pointy hat to:	linimon (r441879 acted on obsolete logs)
Submitted by:	mikael.urankar@gmail.com
Approved by:	maintainer timeout (2 weeks)

Mark some ports failing to package on armv6, with errors classified as
"install_error".

While here, pet portlint.

Approved by:	portmgr (tier-2 blanket)

Update to 1.22.3
Small cleanups
Take maintainership

Reviewed by:	uqs (previous maintainer)

Make MAKE_JOBS_UNSAFE, tries to use stuff before building them, for example:

/wrkdirs/usr/ports/textproc/groff/work/groff-1.22.2/src/devices/gropdf/pdfmom:
not found
gmake[3]: *** [Makefile.sub:117: examples/letter.pdf] Error 127

While there, remove the bsd.port.pre/post inclusion.

Sponsored by:	Absolight

Consistently prefer ${CONFIGURE_CMD} over ./${CONFIGURE_SCRIPT}

This also fixes SET_LATE_CONFIGURE_ARGS with custom CONFIGURE_CMD.

PR:		208294
Exp-run by:	antoine
Approved by:	portmgr (antoine), perl (mat)
Differential Revision:	https://reviews.freebsd.org/D4158

Remove ${PORTSDIR}/ from dependencies, categories r, s, t, and u.

With hat:	portmgr
Sponsored by:	Absolight

Make print/ghostscript9-agpl-base the default Ghostscript port.  Upstream
changed the license to the AGPL 3 in version 9.07 so print/ghostscript9-base
is stuck at 9.06 which is almost 4 years old now.

Fix the logic in Uses/ghostscript.mk so "agpl" is treated as a real version
on its own instead of as a variant of other versions.

Fix print/ghostscript9-agpl-base to install eps2write.

Update math/asymptote to 2.37 to support newer Ghostscript.

PR:		208159
Exp-run by:	antoine
Approved by:	portmgr (antoine)

- Fix shebangs

Approved by:	portmgr blanket

- Split ghostscript into X11-independent and -dependent parts:

 * print/ghostscript{7,8,9,9-agpl}-base

   Installs Ghostscript binary, libgs, and related files.
   These ports do not depend on X11 libraries (i.e. x11* devices
   are not available).  USES=ghostscript will set dependency on
   one of them depending on GHOSTSCRIPT_DEFAULT.

   The default device is set to "display" or "bbox".

 * print/ghostscript{7,8,9,9-agpl}-x11

   Installs a shared library which provides X11 support to
   the installed Ghostscript binaries.  x11* devices will be

Convert code in bsd.port.mk for USE_GHOSTSCRIPT* to USES=ghostscript.

Add GHOSTSCRIPT_DEFAULT to bsd.default-versions.mk for easy version selection.
Arguments supported: <empty>, build, run, nox11 and agpl

PR:		201201 (exp-run)
Approved by:	portmgr (mat@)
Exp run by:	antione@ (previous patch)
Differential Revision:	https://reviews.freebsd.org/D2938

MASTER_SITES cleanup.

- Replace ${MASTER_SITE_FOO} with FOO.
- Merge MASTER_SITE_SUBDIR into MASTER_SITES when possible. (This means 99.9%
  of the time.)
- Remove occurrences of MASTER_SITE_LOCAL when no subdirectory was present and
  no hint of what it should be was present.
- Fix some logic.
- And generally, make things more simple and easy to understand.

While there, add magic values to the FESTIVAL, GENTOO, GIMP, GNUPG, QT and
SAMBA macros.

Also, replace some EXTRACT_SUFX occurences with USES=tar:*.

Checked by:	make fetch-urlall-list
With hat:	portmgr
Sponsored by:	Absolight

Fix packaging as a user (pkg already set the proper owners)

textproc/groff: add CPE information

- Maintainer's timeout (uqs@FreeBSD.org)

PR:		198593
Submitted by:	Shun <shun.fbsd.pr@dropcut.net>

Cleanup plist

Fix textproc/groff pkg-plist for WITHOUT_X11 builds

Submitted by:	Phil Pennock <phil.pennock@spodhuis.org>

textproc/groff: shebangfix and pet portlint

PR:		189654
Submitted by:	paul inetstat net
Approved by:	maintainer

Convert all :U to :tu and :L to :tl

Since FreeBSD 8.4 and FreeBSD 9.1 make(1) do support :tu and :tl as a
replacement for :U and :L (which has been marked as deprecated)

bmake which is the default on FreeBSD 10+ only support by default
:tu/:tl a hack has been added at the time to support :U and :L to ease
migration. This hack is now not necessary anymore

Note that this makes the ports tree incompatible with make(1) from
FreeBSD 8.3 or earlier

With hat:	portmgr

Upgrade to 1.22.2; STAGEify

Approved by:	beat (mentor)

Relpace hardcoded ghostscript build dependency with USE_GHOSTSCRIPT_RUN.

MFH		2014Q1

Add NO_STAGE all over the place in preparation for the staging support (cat:
textproc)

Convert to new perl framework

- adoption of optionsNG, trim historical header
- shift license for portlint

Approved by:	maintainer, uqs@

Merge print/psutils-a4 and print/psutils-letter into a single port
print/psutils.  The default paper size in the programs can be set via
libpaper ($PAPERSIZE or etc/papersize configuration file).

- Convert all remaining instances of BUILD_DEPENDS=${RUN_DEPENDS} or
  RUN_DEPENDS=${BUILD_DEPENDS} to use := which portlint has warned
  about for a while.

PR:             ports/168208
Approved by:    portmgr (miwi)

- update png to 1.5.10

Add CONFLICTS for groff ports

Submitted by:   Andrzej Tobola <ato@iem.pw.edu.pl>
Feature safe:   yes

Add textproc/groff, the latest version of the groff typesetting suite.

Feature safe:   yes
Reviewed by:    ehaupt