FreshPorts -- The Place For Ports If you buy from Amazon USA, please support us by using this link.
Follow us
Blog
Twitter

We also have a status page: https://freshports.wordpress.com/

non port: devel/Makefile
SVNWeb

Number of commits found: 6937 (showing only 100 on this page)

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11  »  [Last Page]

Sat, 11 Nov 2017
[ 10:30 rene ] Original commit   Revision:453966
453966 MOVED
453966 audio/Makefile
453966 audio/gspeakers
453966 audio/sooperlooper
453966 audio/tclmidi
453966 databases/Makefile
453966 databases/elixir-ecto_migrate
453966 devel/Makefile
453966 devel/cl-cffi-sbcl
453966 devel/dwarves

(Only the first 10 of 23 ports in this commit are shown above. View all ports for this commit)
Remove expired ports:
2017-11-04 lang/ats: Unmaintained, outdated, needs lots of refreshment
2017-11-09 games/lordsawar: Broken for more than 6 months
2017-11-09 databases/elixir-ecto_migrate: Broken for more than 6 months
2017-11-09 audio/gspeakers: Broken for more than 6 months
2017-11-09 net/p5-Filesys-SmbClient: Broken for more than 6 months
2017-11-09 audio/tclmidi: Broken for more than 6 months
2017-11-09 security/py-xmlsec: Broken for more than 6 months
2017-11-09 security/samba-virusfilter: Broken for more than 6 months
2017-11-09 textproc/ocaml-pxp: Broken for more than 6 months
2017-11-09 audio/sooperlooper: Broken for more than 6 months
2017-11-09 devel/dwarves: Broken for more than 6 months
2017-11-09 devel/cl-cffi-sbcl: Broken for more than 6 months
2017-11-09 devel/pinba_engine: Broken for more than 6 months
2017-11-09 devel/py-event: Broken for more than 6 months
Fri, 10 Nov 2017
[ 18:57 yuri ] Original commit   Revision:453910
453910 devel/Makefile
453910 devel/pybind11
453910 devel/pybind11/Makefile
453910 devel/pybind11/distinfo
453910 devel/pybind11/pkg-descr
453910 devel/pybind11/pkg-plist
New port: devel/pybind11: Seamless operability between C++11 and Python (cmake
part)

Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D13025
Thu, 9 Nov 2017
[ 07:37 rene ] Original commit   Revision:453799
453799 MOVED
453799 devel/Makefile
453799 devel/pear-PPW
Remove expired port:
2017-11-07 devel/pear-PPW: Project is EoL
Wed, 8 Nov 2017
[ 18:53 ehaupt ] Original commit   Revision:453761
453761 devel/Makefile
453761 devel/py3-protobuf
453761 devel/py3-protobuf/Makefile
453761 security/Makefile
453761 security/py-pbkdf2/Makefile
453761 security/py-pyaes/Makefile
453761 security/py3-pbkdf2
453761 security/py3-pbkdf2/Makefile
453761 security/py3-pyaes
453761 security/py3-pyaes/Makefile

(Only the first 10 of 18 ports in this commit are shown above. View all ports for this commit)
Add python3 stub ports required for the upcoming update of finance/electrum.

Approved by:	portmgr (bdrewery)
Differential Revision:	D13000
[ 14:37 amdmi3 ] Original commit   Revision:453745
453745 devel/Makefile
Sort category Makefile
Tue, 7 Nov 2017
[ 22:42 yuri ] Original commit   Revision:453709
453709 devel/Makefile
453709 devel/libsimdpp
453709 devel/libsimdpp/Makefile
453709 devel/libsimdpp/distinfo
453709 devel/libsimdpp/pkg-descr
453709 devel/libsimdpp/pkg-plist
New port: devel/libsimdpp: Header-only zero-overhead C++ wrapper of SIMD
instructions

PR:		221931
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D12884
[ 19:07 ehaupt ] Original commit   Revision:453671
453671 devel/Makefile
453671 devel/py-jsonrpclib-pelix
453671 devel/py-jsonrpclib-pelix/Makefile
453671 devel/py-jsonrpclib-pelix/distinfo
453671 devel/py-jsonrpclib-pelix/pkg-descr
This project is an implementation of the JSON-RPC v2.0 specification
(backwards-compatible) as a client library. This version is a fork of jsonrpclib
by Josh Marshall, usable with Pelix remote services.

WWW: https://pypi.python.org/pypi/jsonrpclib-pelix/
[ 11:11 tz ] Original commit   Revision:453653
453653 devel/Makefile
453653 devel/aphpunit
453653 devel/aphpunit/Makefile
453653 devel/aphpunit/distinfo
453653 devel/aphpunit/pkg-descr
New port: devel/aphpunit

APHPUnit is a regression testing framework for PHP unit tests.
It removes many limitations the standard literature about
testing declares for years while making tests very fast.

WWW: http://gitlab.toco-domains/APHPUnit/APHPUnit
Mon, 6 Nov 2017
[ 06:40 vanilla ] Original commit   Revision:453591
453591 devel/Makefile
453591 devel/py-grpcio-tools
453591 devel/py-grpcio-tools/Makefile
453591 devel/py-grpcio-tools/distinfo
453591 devel/py-grpcio-tools/pkg-descr
Add py-grpcio-tools, it's Protobuf code generator for gRPC.
Sun, 5 Nov 2017
[ 21:18 sunpoet ] Original commit   Revision:453578
453578 devel/Makefile
453578 devel/p5-SPOPS
453578 devel/p5-SPOPS/Makefile
453578 devel/p5-SPOPS/distinfo
453578 devel/p5-SPOPS/pkg-descr
453578 devel/p5-SPOPS/pkg-plist
Add p5-SPOPS 0.87

Simple Perl Object Persistence with Security

WWW: http://search.cpan.org/dist/SPOPS/

- While I'm here:
  - change MASTER_SITES and WWW to CPAN
  - Fix LICENSE
  - Fix version requirement of *_DEPENDS

PR:		223294
Submitted by:	Sergei Vyshenski <svysh.fbsd@gmail.com>
[ 21:17 sunpoet ] Original commit   Revision:453577
453577 devel/Makefile
453577 devel/p5-Class-Fields
453577 devel/p5-Class-Fields/Makefile
453577 devel/p5-Class-Fields/distinfo
453577 devel/p5-Class-Fields/pkg-descr
453577 devel/p5-Class-Fields/pkg-plist
Add p5-Class-Fields 0.204

A collection of utility functions/methods for examining the data members of
a class. It provides a nice, high-level interface that should stand the test
of time and Perl upgrades nicely.

WWW: http://search.cpan.org/dist/Class-Fields/

- While I'm here, sort PLIST

PR:		223293
Submitted by:	Sergei Vyshenski <svysh.fbsd@gmail.com>
Sat, 4 Nov 2017
[ 13:49 yuri ] Original commit   Revision:453463
453463 devel/Makefile
453463 devel/py-fastnumbers
453463 devel/py-fastnumbers/Makefile
453463 devel/py-fastnumbers/distinfo
453463 devel/py-fastnumbers/pkg-descr
New port: devel/py-fastnumbers: Super-fast and clean conversions to numbers

PR:		223103
Approved by:	tcberner (mentor)
Differential Revision:	https://reviews.freebsd.org/D12906
[ 13:35 dbaio ] Original commit   Revision:453462
453462 devel/Makefile
453462 devel/py-pybloomfiltermmap
453462 devel/py-pybloomfiltermmap/Makefile
453462 devel/py-pybloomfiltermmap/distinfo
453462 devel/py-pybloomfiltermmap/pkg-descr
New port devel/py-pybloomfiltermmap: Fast Python Bloom Filter using Mmap

The goal of pybloomfiltermmap is simple: to provide a fast, simple,
scalable, correct library for Bloom Filters in Python.

WWW: https://github.com/axiak/pybloomfiltermmap
Wed, 1 Nov 2017
[ 13:21 tijl ] Original commit   Revision:453285
453285 MOVED
453285 Mk/Uses/linux.mk
453285 devel/Makefile
453285 devel/linux-c6-ncurses-base
453285 devel/linux-c7-ncurses-base
453285 emulators/linux-c6/Makefile
453285 emulators/linux-c7/Makefile
453285 emulators/linux_base-c6/Makefile
453285 emulators/linux_base-c6/distinfo
453285 emulators/linux_base-c6/pkg-plist.amd64

(Only the first 10 of 17 ports in this commit are shown above. View all ports for this commit)
Merge Linux ncurses-base into linux_base.  It's needed by ncurses-libs.
Fri, 27 Oct 2017
[ 11:58 tobik ] Original commit   Revision:452971
452971 devel/Makefile
452971 devel/hexd
452971 devel/hexd/Makefile
452971 devel/hexd/distinfo
452971 devel/hexd/pkg-descr
New port: devel/hexd

hexd prints a human-readable hexdump of the specified files, or
standard input if omitted.  Its main distinguishing feature is the use
of colours to visually indicate which range of values an octet belongs
to, aiding in spotting patterns in binary data.

WWW: https://github.com/FireyFly/hexd/

PR:		219719
Submitted by:	Dhananjay Balan <mail@dbalan.in>
[ 10:15 pizzamig ] Original commit   Revision:452969
452969 devel/Makefile
452969 devel/codeblocks-devel
452969 devel/codeblocks-devel/Makefile
452969 devel/codeblocks-devel/distinfo
452969 devel/codeblocks-devel/files/patch-revision.m4
452969 devel/codeblocks-devel/files/patch-src_sdk_wxscintilla_src_ScintillaWX.cpp
452969 devel/codeblocks-devel/pkg-plist
devel/codeblocks-devel: new port

PR:		221703
Submitted by:	lbartoletti@tuxfamily.org
Approved by:	olivier (mentor)
Differential Revision:	https://reviews.freebsd.org/D12806
Thu, 26 Oct 2017
[ 22:34 jonathan ] Original commit   Revision:452958
452958 devel/Makefile
452958 devel/llbuild
452958 devel/llbuild/Makefile
452958 devel/llbuild/distinfo
452958 devel/llbuild/files
452958 devel/llbuild/files/patch-CMakeLists.txt
452958 devel/llbuild/files/patch-cmake_modules_FindFileCheck.cmake
452958 devel/llbuild/files/patch-cmake_modules_FindLit.cmake
452958 devel/llbuild/files/patch-lib_Basic_CMakeLists.txt
452958 devel/llbuild/files/patch-lib_Ninja_CMakeLists.txt

(Only the first 10 of 15 ports in this commit are shown above. View all ports for this commit)
New port: devel/llbuild

llbuild is a set of libraries for building build systems. Unlike most
build system projects which focus on the syntax for describing the
build, llbuild is designed around a reusable, flexible, and scalable
general purpose build engine capable of solving many "build system"-like
problems. The project also includes additional libraries on top of that
engine which provide support for constructing bespoke build systems
(like swift build) or for building from Ninja manifests.

WWW: https://github.com/apple/switch-llbuild

Approved by:	mat
Sponsored by:	DARPA, AFRL
Differential Revision:	https://reviews.freebsd.org/D8439
Sat, 21 Oct 2017
[ 20:22 olgeni ] Original commit   Revision:452614
452614 devel/Makefile
452614 devel/elixir-trailing_format_plug
452614 devel/elixir-trailing_format_plug/Makefile
452614 devel/elixir-trailing_format_plug/distinfo
452614 devel/elixir-trailing_format_plug/pkg-descr
452614 devel/elixir-trailing_format_plug/pkg-plist
Add devel/elixir-trailing_format_plug, an Elixir plug to support
rails-like trailing format in APIs.
[ 19:59 olgeni ] Original commit   Revision:452600
452600 devel/Makefile
452600 devel/elixir-cachex
452600 devel/elixir-cachex/Makefile
452600 devel/elixir-cachex/distinfo
452600 devel/elixir-cachex/pkg-descr
452600 devel/elixir-cachex/pkg-plist
Add devel/elixir-cachex, a caching library for Elixir.
[ 19:55 olgeni ] Original commit   Revision:452599
452599 devel/Makefile
452599 devel/elixir-eternal
452599 devel/elixir-eternal/Makefile
452599 devel/elixir-eternal/distinfo
452599 devel/elixir-eternal/pkg-descr
452599 devel/elixir-eternal/pkg-plist
Add devel/elixir-eternal, an ETS table supervisor for Elixir.
[ 19:53 olgeni ] Original commit   Revision:452598
452598 devel/Makefile
452598 devel/elixir-deppie
452598 devel/elixir-deppie/Makefile
452598 devel/elixir-deppie/distinfo
452598 devel/elixir-deppie/pkg-descr
452598 devel/elixir-deppie/pkg-plist
Add devel/elixir-deppie, a deprecation logger for Elixir.
Fri, 20 Oct 2017
[ 05:47 antoine ] Original commit   Revision:452502
452502 devel/Makefile
Hook py-cdg to the build
Thu, 19 Oct 2017
[ 18:59 rene ] Original commit   Revision:452462
452462 MOVED
452462 devel/Makefile
452462 devel/p5-Log-Any-Adapter-Syslog
Remove expired port:
2017-10-17 devel/p5-Log-Any-Adapter-Syslog: Merged with devel/p5-Log-Any
[ 17:43 jrm ] Original commit   Revision:452456
452456 devel/Makefile
Also add changes to devel/Makefile for new ports, devel/rubygem-statsd-ruby,
devel/rubygem-nsa-rails5, and devel/rubygem-webpacker-rails5.  This should have
been included in the last commit.
Tue, 17 Oct 2017
[ 09:12 tobik ] Original commit   Revision:452273
452273 devel/Makefile
452273 devel/tokei
452273 devel/tokei/Makefile
452273 devel/tokei/distinfo
452273 devel/tokei/pkg-descr
New port: devel/tokei

Tokei is a program that displays statistics about your code.  Tokei
will show number of files, total lines within those files and code,
comments, and blanks grouped by language.

It is fast, supports over 100 languages, and correctly handles multi
line comments, nested comments, while ignoring comments that are in
strings, providing accurate code statistics.

WWW: https://github.com/Aaronepower/tokei
Mon, 16 Oct 2017
[ 20:37 rene ] Original commit   Revision:452251
452251 MOVED
452251 devel/Makefile
452251 devel/vtcl
452251 editors/Makefile
452251 editors/tpad
452251 games/Makefile
452251 games/polypuzzle
452251 multimedia/Makefile
452251 multimedia/nxtvepg
452251 net/Makefile

(Only the first 10 of 13 ports in this commit are shown above. View all ports for this commit)
Remove expired ports:
2017-10-15 devel/vtcl: This port depends on Tcl/Tk 8.4 , which is no longer
maintained. Please port it to 8.5+
2017-10-15 editors/tpad: This port depends on Tcl/Tk 8.4 , which is no longer
maintained. Please port it to 8.5+
2017-10-15 games/polypuzzle: This port depends on Tcl/Tk 8.4 , which is no
longer maintained. Please port it to 8.5+
2017-10-15 multimedia/nxtvepg: This port depends on Tcl/Tk 8.4 , which is no
longer maintained. Please port it to 8.5+
2017-10-15 net/xpvm: This port depends on Tcl/Tk 8.4 , which is no longer
maintained. Please port it to 8.5+
2017-10-15 x11/tkXwin: This port depends on Tcl/Tk 8.4 , which is no longer
maintained. Please port it to 8.5+
Sat, 14 Oct 2017
[ 10:49 rene ] Original commit   Revision:452055
452055 MOVED
452055 devel/Makefile
452055 devel/arduino-glcd
452055 devel/arduino-openglcd
452055 devel/arduino-openglcd/Makefile
452055 devel/arduino-openglcd/distinfo
452055 devel/arduino-openglcd/pkg-descr
452055 devel/arduino-openglcd/pkg-plist
Undeprecate and switch to an active fork of devel/arduino-glcd and rename port.

PR:		217931
Submitted by:	Craig Leres
MFH:		2017Q4
Thu, 12 Oct 2017
[ 17:53 feld ] Original commit   Revision:451920
451920 devel/Makefile
451920 devel/py-pid
451920 devel/py-pid/Makefile
451920 devel/py-pid/distinfo
451920 devel/py-pid/pkg-descr
Pidfile featuring stale detection and file-locking, can also be used as
context-manager or decorator

WWW: http://pypi.python.org/pypi/pid
[ 17:41 feld ] Original commit   Revision:451918
451918 devel/Makefile
451918 devel/py-dateutils
451918 devel/py-dateutils/Makefile
451918 devel/py-dateutils/distinfo
451918 devel/py-dateutils/pkg-descr
Various utilities for working with date and datetime objects

WWW: https://pypi.python.org/pypi/dateutils
Sun, 8 Oct 2017
[ 18:48 pi ] Original commit   Revision:451555
451555 MOVED
451555 devel/Makefile
451555 devel/vtable-dumper
devel/vtable-dumper: removed, use devel/abi-compliance-checker instead

vtable-dumper is part of devel/abi-compliance-checker since January 2017.
[ 12:33 dbaio ] Original commit   Revision:451521
451521 devel/Makefile
451521 devel/py-subprocess32
451521 devel/py-subprocess32/Makefile
451521 devel/py-subprocess32/distinfo
451521 devel/py-subprocess32/pkg-descr
Add devel/py-subprocess32, Backport of the subprocess module from Python 3.2 &
3.3

This is a backport of the subprocess standard library module
from Python 3.2 & 3.3 for use on Python 2.  It includes bugfixes
and some new features.  On POSIX systems it is guaranteed to
be reliable when used in threaded applications.  It includes
timeout support from Python 3.3 but otherwise matches 3.2's API.
It has not been tested on Windows.

WWW: https://github.com/google/python-subprocess32

PR:		222628
Submitted by:	Sebastian Schwarz <seschwar@gmail.com>
Reviewed by:	koobs, sunpoet
Differential Revision:	D12519
Tue, 3 Oct 2017
[ 17:33 feld ] Original commit   Revision:451160
451160 devel/Makefile
451160 devel/p5-Util-Any
451160 devel/p5-Util-Any/Makefile
451160 devel/p5-Util-Any/distinfo
451160 devel/p5-Util-Any/pkg-descr
451160 devel/p5-Util-Any/pkg-plist
For the people like the man who cannot remember uniq function is in
whether List::Util or List::MoreUtils. And for the newbie who don't know
where useful utilities is.

WWW: https://github.com/ktat/Util-Any
[ 17:21 feld ] Original commit   Revision:451159
451159 devel/Makefile
451159 devel/p5-List-Pairwise
451159 devel/p5-List-Pairwise/Makefile
451159 devel/p5-List-Pairwise/distinfo
451159 devel/p5-List-Pairwise/pkg-descr
451159 devel/p5-List-Pairwise/pkg-plist
List::Pairwise provides functions to map and grep lists two elements at
a time, setting $a and $b to each pair instead of setting $_ to each
element.

WWW: https://metacpan.org/pod/List::Pairwise
[ 16:55 feld ] Original commit   Revision:451157
451157 devel/Makefile
451157 devel/p5-ExportTo
451157 devel/p5-ExportTo/Makefile
451157 devel/p5-ExportTo/distinfo
451157 devel/p5-ExportTo/pkg-descr
451157 devel/p5-ExportTo/pkg-plist
This module allow you to export/override subroutine/method to one
namespace. It can be used for mix-in, for extension of modules not using
inheritance.

WWW: https://github.com/ktat/ExportTo
Sat, 30 Sep 2017
[ 15:37 sbz ] Original commit   Revision:450998
450998 devel/Makefile
450998 devel/py-testinfra
450998 devel/py-testinfra/Makefile
450998 devel/py-testinfra/distinfo
450998 devel/py-testinfra/pkg-descr
Testinfra test your infrastructures.

With Testinfra you can write unit tests in Python to test *actual state* of
your servers configured by management tools like Salt, Ansible, Puppet,
Chef and so on.

Testinfra aims to be a Serverspec equivalent in python and is written as
a plugin to the powerful Pytest test engine.

WWW: https://github.com/philpep/testinfra
[ 11:25 rene ] Original commit   Revision:450978
450978 MOVED
450978 devel/Makefile
450978 devel/libclaw
Remove expired port:
2017-09-30 devel/libclaw: useless for anything apart from removed
games/plee-the-bear
[ 10:16 sunpoet ] Original commit   Revision:450960
450960 devel/Makefile
450960 devel/py-twistedRunner
Remove devel/py-twistedRunner
[ 10:16 sunpoet ] Original commit   Revision:450959
450959 devel/Makefile
450959 devel/py-twistedFlow
Remove devel/py-twistedFlow
[ 10:15 sunpoet ] Original commit   Revision:450958
450958 devel/Makefile
450958 devel/py-twistedCore
Remove devel/py-twistedCore
[ 10:15 sunpoet ] Original commit   Revision:450957
450957 devel/Makefile
450957 devel/py-twisted152
Remove devel/py-twisted152
[ 09:07 tota ] Original commit   Revision:450952
450952 devel/Makefile
450952 devel/R-cran-sfsmisc
450952 devel/R-cran-sfsmisc/Makefile
450952 devel/R-cran-sfsmisc/distinfo
450952 devel/R-cran-sfsmisc/pkg-descr
- Add new port: devel/R-cran-sfsmisc

  Useful utilities ['goodies'] from Seminar fuer Statistik ETH Zurich,
  quite a few related to graphics; some were ported from S-plus.

  WWW: https://cran.r-project.org/web/packages/sfsmisc/
Thu, 28 Sep 2017
[ 10:39 sunpoet ] Original commit   Revision:450814
450814 devel/Makefile
450814 devel/rubygem-cucumber-expressions
450814 devel/rubygem-cucumber-expressions/Makefile
450814 devel/rubygem-cucumber-expressions/distinfo
450814 devel/rubygem-cucumber-expressions/pkg-descr
Add rubygem-cucumber-expressions 4.0.3

Cucumber Expressions are simple patterns for matching Step Definitions with
Gherkin steps.

Cucumber Expressions offer similar functionality to Regular Expressions, with
the following improvements:
- Improved readability
- Custom parameter types
- Expression generation

WWW: https://github.com/cucumber/cucumber-expressions-ruby
[ 10:38 sunpoet ] Original commit   Revision:450813
450813 devel/Makefile
450813 devel/rubygem-cucumber-tag_expressions
450813 devel/rubygem-cucumber-tag_expressions/Makefile
450813 devel/rubygem-cucumber-tag_expressions/distinfo
450813 devel/rubygem-cucumber-tag_expressions/pkg-descr
Add rubygem-cucumber-tag_expressions 1.0.1

Tag Expressions provide a simple query language for tags. The simplest tag
expression is simply a single tag.

WWW: https://github.com/cucumber/tag-expressions-ruby
Wed, 27 Sep 2017
[ 19:21 wg ] Original commit   Revision:450780
450780 devel/Makefile
450780 devel/py-googleapis-common-protos
450780 devel/py-googleapis-common-protos/Makefile
450780 devel/py-googleapis-common-protos/distinfo
450780 devel/py-googleapis-common-protos/pkg-descr
www/py-googleapis-common-protos: Common protobufs used in Google APIs

googleapis-common-protos contains the python classes generated from the common
protos in the googleapis repository.

WWW: https://github.com/googleapis/googleapis
Tue, 26 Sep 2017
[ 19:16 girgen ] Original commit   Revision:450695
450695 devel/Makefile
450695 devel/libght
450695 devel/libght/Makefile
450695 devel/libght/distinfo
450695 devel/libght/files
450695 devel/libght/files/patch-CMakeLists.txt
450695 devel/libght/files/patch-src_ght__hash.c
450695 devel/libght/pkg-descr
450695 devel/libght/pkg-plist
Add libght to the ports tree

PR:	221577
[ 04:56 rodrigc ] Original commit   Revision:450642
450642 devel/Makefile
450642 devel/buildbot-console-view/Makefile
450642 devel/buildbot-console-view/distinfo
450642 devel/buildbot-console-view/pkg-descr
450642 devel/buildbot-pkg/Makefile
450642 devel/buildbot-pkg/distinfo
450642 devel/buildbot-pkg/pkg-descr
450642 devel/buildbot-waterfall-view/Makefile
450642 devel/buildbot-waterfall-view/distinfo
450642 devel/buildbot-waterfall-view/pkg-descr

(Only the first 10 of 25 ports in this commit are shown above. View all ports for this commit)
devel/buildbot*: Update to 0.9.11, Add buildbot-grid-view

* Update to buildbot 0.9.11
* Add required devel/py-buildbot-grid-view dependency
* Clean up stuff from individual Makefiles that was copy/pasted from the main
buildbot Makefile
* buildbot-www, buildbot-grid-view, buildbot-console-view,
buildbot-waterfall-view cannot be tested outside
   of buildbot, so remove stuff from their Makefiles to simplify.

Reviewed_by: koobs, asomers, sunpoet
Approved by: grembo
Differential_Revision: https://reviews.freebsd.org/D12479
Sun, 24 Sep 2017
[ 19:04 sunpoet ] Original commit   Revision:450535
450535 devel/Makefile
450535 devel/rubygem-reentrant_flock
450535 devel/rubygem-reentrant_flock/Makefile
450535 devel/rubygem-reentrant_flock/distinfo
450535 devel/rubygem-reentrant_flock/pkg-descr
Add rubygem-reentrant_flock 0.1.0

ReentrantFlock is a reentrant/recursive flock.

WWW: https://github.com/sonots/reentrant_flock
[ 19:03 sunpoet ] Original commit   Revision:450534
450534 devel/Makefile
450534 devel/p5-MooseX-Util
450534 devel/p5-MooseX-Util/Makefile
450534 devel/p5-MooseX-Util/distinfo
450534 devel/p5-MooseX-Util/pkg-descr
450534 devel/p5-MooseX-Util/pkg-plist
Add p5-MooseX-Util 0.006

MooseX::Util is a utility module that handles all of the same functions that
Moose::Util handles. In fact, most of the functions exported by this package are
simply re-exports from Moose::Util, so you're recommended to read the
documentation of that module for a comprehensive view.

WWW: http://search.cpan.org/dist/MooseX-Util/
[ 19:03 sunpoet ] Original commit   Revision:450533
450533 devel/Makefile
450533 devel/p5-MooseX-TraitFor-Meta-Class-BetterAnonClassNames
450533 devel/p5-MooseX-TraitFor-Meta-Class-BetterAnonClassNames/Makefile
450533 devel/p5-MooseX-TraitFor-Meta-Class-BetterAnonClassNames/distinfo
450533 devel/p5-MooseX-TraitFor-Meta-Class-BetterAnonClassNames/pkg-descr
450533 devel/p5-MooseX-TraitFor-Meta-Class-BetterAnonClassNames/pkg-plist
Add p5-MooseX-TraitFor-Meta-Class-BetterAnonClassNames 0.002003

MooseX::TraitFor::Meta::Class::BetterAnonClassNames is a metaclass trait to
attempt to demystify generated anonymous class names.

WWW:
http://search.cpan.org/dist/MooseX-TraitFor-Meta-Class-BetterAnonClassNames/
Fri, 22 Sep 2017
[ 22:03 brooks ] Original commit   Revision:450418
450418 devel/Makefile
450418 devel/xtoolchain-llvm50
450418 devel/xtoolchain-llvm50/Makefile
Add xtoolchain port for llvm50.
[ 15:49 sunpoet ] Original commit   Revision:450386
450386 devel/Makefile
450386 devel/rubygem-grape_logging
450386 devel/rubygem-grape_logging/Makefile
450386 devel/rubygem-grape_logging/distinfo
450386 devel/rubygem-grape_logging/pkg-descr
Add rubygem-grape_logging 1.7.0

This gem provides simple request logging for Grape with just few lines of code
you have to put in your project! In return you will get response codes, paths,
parameters and more!

WWW: https://github.com/aserafin/grape_logging
[ 10:48 mat ] Original commit   Revision:450352
450352 MOVED
450352 devel/Makefile
450352 devel/libexecinfo
Remove devel/libexecinfo.

PR:		220271
Submitted by:	mat (review), Yasuhiro KIMURA (PR)
Sponsored by:	Absolight
Differential Revision:	https://reviews.freebsd.org/D11488
Thu, 21 Sep 2017
[ 14:33 tz ] Original commit   Revision:450261
450261 devel/Makefile
450261 devel/rubygem-bootstrap_form
450261 devel/rubygem-bootstrap_form/Makefile
450261 devel/rubygem-bootstrap_form/distinfo
450261 devel/rubygem-bootstrap_form/pkg-descr
New port: devel/rubygem-bootstrap_form

Rails Bootstrap Forms is a rails form builder that makes it super easy to
integrate twitter bootstrap-style forms into your rails application.

WWW: https://github.com/bootstrap-ruby/rails-bootstrap-forms
[ 14:30 tz ] Original commit   Revision:450260
450260 devel/Makefile
450260 devel/rubygem-rails-i18n-4
450260 devel/rubygem-rails-i18n-4/Makefile
450260 devel/rubygem-rails-i18n-4/distinfo
450260 devel/rubygem-rails-i18n-4/pkg-descr
New port: devel/rubygem-rails-i18n-4

A set of common locale data and translations to internationalize and/or localize
your Rails applications.

WWW: https://github.com/svenfuchs/rails-i18n
Wed, 20 Sep 2017
[ 16:31 sunpoet ] Original commit   Revision:450207
450207 devel/Makefile
450207 devel/rubygem-xdg
450207 devel/rubygem-xdg/Makefile
450207 devel/rubygem-xdg/distinfo
450207 devel/rubygem-xdg/pkg-descr
Add rubygem-xdg 2.2.3

XDG provides an easy to use Ruby library for working with XDG standards.

Presently, it only supports the XDG Base Directory Standard.

If your program utilizes user or system-wide support files (e.g. configuration
files), you owe it to yourself to checkout the XDG base directory standard.

You can learn more about the standard at:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

WWW: http://rubyworks.github.io/xdg/
Sun, 17 Sep 2017
[ 20:59 cs ] Original commit   Revision:450024
450024 devel/Makefile
450024 devel/pijul
450024 devel/pijul/Makefile
450024 devel/pijul/distinfo
450024 devel/pijul/pkg-descr
Pijul is a version control system based on patches, that can mimic the
behaviour and workflows of both Git and Darcs, but contrarily to those systems,
Pijul is based on a mathematically sound theory of patches.

Pijul was started out of frustration that no version control system was at the
same time fast and sound:

- Git has non-associative merges, which might lead to security problems.
  Concretely, this means that the commits you merge might not be the same as
  the ones you review and test.

- Handling of conflicts: Pijul has an explicit internal representation of
  conflicts, a rock-solid theory of how they behave, and super-fast data
  structures to handle them.

- Speed! The complexity of Pijul is low in all cases, whereas previous attempts
  to build a mathematically sound distributed version control system had huge
  worst-case complexities. The use of Rust additionally yields a blazingly fast
  implementation.

WWW: https://pijul.org/
[ 11:10 dbaio ] Original commit   Revision:449992
449992 devel/Makefile
449992 devel/py-pytest-cov
449992 devel/py-pytest-cov/Makefile
449992 devel/py-pytest-cov/distinfo
449992 devel/py-pytest-cov/pkg-descr
Add devel/py-pytest-cov, pytest plugin for measuring coverage

This plugin produces coverage reports. It supports centralised testing and
distributed testing in both load and each modes. It also supports coverage of
subprocesses.

All features offered by the coverage package should be available, either through
pytest-cov or through coverage's config file.

WWW: https://github.com/pytest-dev/pytest-cov

Reviewed by:	koobs
Differential Revision:	D12394
Fri, 15 Sep 2017
[ 18:01 dumbbell ] Original commit   Revision:449914
449914 MOVED
449914 Mk/Uses/cargo.mk
449914 Mk/bsd.gecko.mk
449914 UPDATING
449914 devel/Makefile
449914 devel/cargo
449914 lang/rust/Makefile
449914 lang/rust/distinfo
449914 lang/rust/files/config.toml
449914 lang/rust/files/extra-patch-ino64

(Only the first 10 of 12 ports in this commit are shown above. View all ports for this commit)
lang/rust: Install Cargo + use bundled crates

This port now provides Cargo. This is the recommended now because Cargo
won't be provided separately in the future.

To build Cargo, we set `extended = true` in `config.toml`. As a side
effect, this flag also installs Rust source code. The port has a new
`SOURCES` option (disabled by default) to keep those sources.

As a consequence of this, `devel/cargo` is removed. Several ports
and Makefiles in Mk were updated to depend on `lang/rust` instead of
`devel/cargo`.

The other big change in this patch is the use of the bundled crates,
instead of relying on Cargo's registry (which was part of the distfiles,
(Only the first 15 lines of the commit message are shown above View all of this commit message)
Thu, 14 Sep 2017
[ 21:13 swills ] Original commit   Revision:449854
449854 devel/Makefile
449854 devel/libzim
449854 devel/libzim/Makefile
449854 devel/libzim/distinfo
449854 devel/libzim/pkg-descr
449854 devel/libzim/pkg-plist
devel/libzim: create port

The openZIM project proposes offline storage solutions for content coming from
the Web.

WWW: http://www.openzim.org/wiki/OpenZIM
[ 21:02 adridg ] Original commit   Revision:449853
449853 MOVED
449853 UPDATING
449853 astro/libosmpbf/files/patch-src_CMakeLists.txt
449853 astro/libosmpbf/files/patch-tools_CMakeLists.txt
449853 audio/sayonara/files/patch-CMakeLists.txt
449853 audio/sayonara/files/patch-src_3rdParty_SomaFM_ui_GUI__SomaFM.h
449853 audio/sayonara/files/patch-src_3rdParty_Soundcloud_ui_GUI__SoundcloudArtistSearch.h
449853 audio/sayonara/files/patch-src_3rdParty_Soundcloud_ui_GUI__SoundcloudLibrary.h
449853 audio/sayonara/files/patch-uifiles.patch
449853 databases/kdb/files

(Only the first 10 of 33 ports in this commit are shown above. View all ports for this commit)
Update CMake to 3.9, merge devel/cmake-modules into devel/cmake

Thanks to antoine@ for the exp-run.

Approved by:		rakuco (mentor)
Reviewed by:		tcberner (mentor)
Reviewed by:		mat
PR:			222000 (exp-run)
Differential Revision:	https://reviews.freebsd.org/D12299
[ 19:30 brooks ] Original commit   Revision:449851
449851 devel/Makefile
449851 devel/llvm50
449851 devel/llvm50/Makefile
449851 devel/llvm50/distinfo
449851 devel/llvm50/files/clang-patch-fformat_extensions.diff
449851 devel/llvm50/files/clang-patch-fopenmp.diff
449851 devel/llvm50/files/clang-patch-tools_clang_lib_Headers_CMakeLists.txt
449851 devel/llvm50/files/compiler-rt-patch-canonical-syscalls
449851 devel/llvm50/files/compiler-rt-patch-ino64
449851 devel/llvm50/files/lldb-patch-tools_lldb_source_Host_common_FileSpec.cpp

(Only the first 10 of 12 ports in this commit are shown above. View all ports for this commit)
Add a port of LLVM 5.0.0 release.

Sponsored by:	DARPA, AFRL
Mon, 11 Sep 2017
[ 13:10 mat ] Original commit   Revision:449635
449635 databases/Makefile
449635 devel/Makefile
449635 math/Makefile
449635 net-mgmt/Makefile
449635 security/Makefile
449635 sysutils/Makefile
Sort categories Makefiles properly.

Sponsored by:	Absolight
[ 09:00 olgeni ] Original commit   Revision:449617
449617 devel/Makefile
449617 devel/elixir-gen_stage
449617 devel/elixir-gen_stage/Makefile
449617 devel/elixir-gen_stage/distinfo
449617 devel/elixir-gen_stage/pkg-descr
449617 devel/elixir-gen_stage/pkg-plist
Add devel/elixir-gen_stage, producer and consumer pipelines with
back-pressure for Elixir.
Sun, 10 Sep 2017
[ 14:45 tota ] Original commit   Revision:449576
449576 devel/Makefile
449576 devel/R-cran-withr
449576 devel/R-cran-withr/Makefile
449576 devel/R-cran-withr/distinfo
449576 devel/R-cran-withr/pkg-descr
- Add new port: devel/R-cran-withr

  A set of functions to run code 'with' safely and temporarily modified
  global state. Many of these functions were originally a part of the
  'devtools' package, this provides a simple package with limited
  dependencies to provide access to these functions.

  WWW: https://cran.r-project.org/web/packages/withr/
[ 10:18 tota ] Original commit   Revision:449529
449529 devel/Makefile
449529 devel/R-cran-lubridate
449529 devel/R-cran-lubridate/Makefile
449529 devel/R-cran-lubridate/distinfo
449529 devel/R-cran-lubridate/pkg-descr
- Add new port: devel/R-cran-lubridate

  Functions to work with date-times and time-spans: fast and user
  friendly parsing of date-time data, extraction and updating of
  components of a date-time (years, months, days, hours, minutes, and
  seconds), algebraic manipulation on date-time and time-span objects.
  The 'lubridate' package has a consistent and memorable syntax that
  makes working with dates easy and fun.

  WWW: https://cran.r-project.org/web/packages/lubridate/
Thu, 7 Sep 2017
[ 05:53 ed ] Original commit   Revision:449385
449385 devel/Makefile
449385 devel/arpc
449385 devel/arpc/Makefile
449385 devel/arpc/distinfo
449385 devel/arpc/pkg-descr
Add a package for ARPC.

ARPC is an RPC library similar to GRPC. Though a lot simpler than GRPC
featurewise, it has transparent support for file descriptor passing.
ARPC is used by some applications related to CloudABI, like Flower
(CloudABI's networking daemon).

Reviewed by:	riggs
Differential Revision:	https://reviews.freebsd.org/D12103
Wed, 6 Sep 2017
[ 22:35 tota ] Original commit   Revision:449378
449378 devel/Makefile
449378 devel/R-cran-hms
449378 devel/R-cran-hms/Makefile
449378 devel/R-cran-hms/distinfo
449378 devel/R-cran-hms/pkg-descr
- Add new port: devel/R-cran-hms

  Implements an S3 class for storing and formatting time-of-day values,
  based on the 'difftime' class.

  WWW: https://cran.r-project.org/web/packages/hms/
[ 20:04 ed ] Original commit   Revision:449362
449362 devel/Makefile
449362 devel/py3-toposort
449362 devel/py3-toposort/Makefile
449362 textproc/Makefile
449362 textproc/py3-pyPEG2
449362 textproc/py3-pyPEG2/Makefile
Add py3-* packages for toposort and pyPEG2.

The port for ARPC (https://github.com/NuxiNL/arpc) I am preparing comes
with a script called 'aprotoc' that depends on these Python modules.
Ports that default to Python 2 have already been added, but now we
should add Python 3 flavours as well.

Reviewed by:	koobs
Approved by:	portmgr (bdrewery)
Differential Revision:	https://reviews.freebsd.org/D12068
[ 12:00 ed ] Original commit   Revision:449342
449342 devel/Makefile
449342 devel/yaml2argdata
449342 devel/yaml2argdata/Makefile
449342 devel/yaml2argdata/distinfo
449342 devel/yaml2argdata/pkg-descr
449342 devel/yaml2argdata/pkg-plist
New port: devel/yaml2argdata.

The latest release of cloudabi-utils has cloudabi-run rewritten from C
into C++. It now also has integrated support for attaching processes to
CloudABI's networking daemon, Flower.

In the process, code specific to parsing YAML configuration files
describing process configuration and resource dependencies has been
placed into a separate library, called yaml2argdata. This has the
advantage that this code can now be used by CloudABI's Kubernetes daemon
as well. Add a package for it, so sysutils/cloudabi-utils can make use
of it when we bump it.

Reviewed by:	mat
Differential Revision:	https://reviews.freebsd.org/D12164
Tue, 5 Sep 2017
[ 23:09 tota ] Original commit   Revision:449318
449318 devel/Makefile
449318 devel/R-cran-tidyselect
449318 devel/R-cran-tidyselect/Makefile
449318 devel/R-cran-tidyselect/distinfo
449318 devel/R-cran-tidyselect/pkg-descr
- Add new port: devel/R-cran-tidyselect

  A backend for the selecting functions of the 'tidyverse'. It makes
  it easy to implement select-like functions in your own packages in
  a way that is consistent with other 'tidyverse' interfaces for
  selection.

  WWW: https://cran.r-project.org/web/packages/tidyselect/
[ 17:15 tota ] Original commit   Revision:449305
449305 devel/Makefile
449305 devel/R-cran-glue
449305 devel/R-cran-glue/Makefile
449305 devel/R-cran-glue/distinfo
449305 devel/R-cran-glue/pkg-descr
- Add new port: devel/R-cran-glue

  An implementation of interpreted string literals, inspired by
  Python's Literal String Interpolation and Docstrings and Julia's
  Triple-Quoted String Literals.

  WWW: https://cran.r-project.org/web/packages/glue/
[ 15:36 tota ] Original commit   Revision:449292
449292 devel/Makefile
449292 devel/R-cran-purrr
449292 devel/R-cran-purrr/Makefile
449292 devel/R-cran-purrr/distinfo
449292 devel/R-cran-purrr/pkg-descr
- Add new port: devel/R-cran-purrr

  A complete and consistent functional programming toolkit for R.

  WWW: https://cran.r-project.org/web/packages/purrr/
[ 04:26 gordon ] Original commit   Revision:449267
449267 devel/Makefile
449267 devel/py-logfury
449267 devel/py-logfury/Makefile
449267 devel/py-logfury/distinfo
449267 devel/py-logfury/pkg-descr
New port: devel/py-logfury

logfury is a logging of method calls for python libraries.

It provides meta classes and decorators to easily trace python programs.

Reviewed by:	mat
Differential Revision:	https://reviews.freebsd.org/D12135
Sun, 3 Sep 2017
[ 10:33 rene ] Original commit   Revision:449196
449196 MOVED
449196 databases/Makefile
449196 databases/py33-gdbm
449196 databases/py33-sqlite3
449196 devel/Makefile
449196 devel/py3-enum34
449196 devel/py33-setuptools
449196 lang/Makefile
449196 lang/python33
449196 x11-toolkits/Makefile

(Only the first 10 of 11 ports in this commit are shown above. View all ports for this commit)
Remove Python 3.3 and related ports, it expired today:
2017-09-01 lang/python33: No longer receives bug fixes, only security updates.
Please update to Python 3.6
databases/py33-gdbm
databases/py33-sqlite3
devel/py33-setuptools
x11-toolkits/py33-tkinter
devel/py3-enum34
[ 09:51 rene ] Original commit   Revision:449193
449193 MOVED
449193 audio/Makefile
449193 audio/tomahawk
449193 devel/Makefile
449193 devel/rubygem-sequel3
449193 devel/rubygem-sidekiq-cron04
449193 devel/rubygem-sidekiq4
449193 devel/rubygem-webpacker1-rails5
449193 german/Makefile
449193 german/phone

(Only the first 10 of 18 ports in this commit are shown above. View all ports for this commit)
Remove expired ports:
2017-08-30 www/speedtest-mini: Discontinued upstream (on June 30, 2017)
2017-08-31 devel/rubygem-sequel3: Use devel/rubygem-sequel instead
2017-08-31 audio/tomahawk: Project is dead upstream.
2017-08-31 mail/rubygem-larch: Unmaintained by upstream, no changes since 2013
2017-08-31 devel/rubygem-sidekiq4: Use devel/rubygem-sidekiq instead
2017-08-31 devel/rubygem-webpacker1-rails5: Use devel/rubygem-webpacker-rails5
instead
2017-08-31 devel/rubygem-sidekiq-cron04: Use devel/rubygem-sidekiq-cron instead
2017-09-01 www/py-django19: Unsupported upstream
2017-09-01 mail/movemail: Out of date
2017-09-01 german/phone: Out of date
2017-09-01 ports-mgmt/fbsdmon: no longer maintained, web site it sends data to
has been taken over by cybersquatters
Fri, 1 Sep 2017
[ 18:10 wg ] Original commit   Revision:449092
449092 devel/Makefile
449092 devel/py-pydevd
449092 devel/py-pydevd/Makefile
449092 devel/py-pydevd/distinfo
449092 devel/py-pydevd/pkg-descr
devel/py-pydevd: The sources for the PyDev.Debugger (used in PyDev & PyCharm)

It is available so that it can be installed for doing remote debugging.

WWW: https://pypi.python.org/pypi/pydevd
[ 07:40 tz ] Original commit   Revision:449058
449058 devel/Makefile
449058 devel/rubygem-prometheus-client-mmap
449058 devel/rubygem-prometheus-client-mmap/Makefile
449058 devel/rubygem-prometheus-client-mmap/distinfo
449058 devel/rubygem-prometheus-client-mmap/pkg-descr
New port: devel/rubygem-prometheus-client-mmap

This Prometheus library is fork of Prometheus Ruby Client that uses mmap'ed
files to share metrics from multiple processes.  This allows efficient metrics
processing for Ruby web apps running in multiprocess setups like Unicorn.

A suite of instrumentation metric primitives for Ruby that can be exposed
through a HTTP interface. Intended to be used together with a Prometheus server.

WWW: https://gitlab.com/gitlab-org/prometheus-client-mmap
[ 07:38 tz ] Original commit   Revision:449057
449057 devel/Makefile
449057 devel/rubygem-mmap2
449057 devel/rubygem-mmap2/Makefile
449057 devel/rubygem-mmap2/distinfo
449057 devel/rubygem-mmap2/pkg-descr
New port: devel/rubygem-mmap2

The Mmap class implement memory-mapped file objects for Ruby 2.x.

WWW: https://gitlab.com/lyda/mmap
Wed, 30 Aug 2017
[ 00:47 dbaio ] Original commit   Revision:448951
448951 devel/Makefile
448951 devel/py-gtfslib
448951 devel/py-gtfslib/Makefile
448951 devel/py-gtfslib/distinfo
448951 devel/py-gtfslib/pkg-descr
New port devel/py-gtfslib: Library for reading GTFS-based transit data in Python

An open source library in python for reading GTFS files and computing various
stats and indicators about Public Transport networks.

WWW: https://pypi.python.org/pypi/gtfslib

PR:		221730
Submitted by:	lbartoletti@tuxfamily.org
[ 00:25 dbaio ] Original commit   Revision:448950
448950 devel/Makefile
448950 devel/py-pyqtree
448950 devel/py-pyqtree/Makefile
448950 devel/py-pyqtree/distinfo
448950 devel/py-pyqtree/pkg-descr
New port devel/py-pyqtree: Pure Python quad tree spatial index for GIS or
rendering usage

Pyqtree is a pure Python spatial index for GIS or rendering usage. It storesand
quickly retrieves items from a 2x2 rectangular grid area, and grows in depth and
detail as more items are added. The actual quad tree implementation is adapted
from Matt Rasmussen's compbio library and extended for geospatial use.

WWW: https://github.com/karimbahgat/Pyqtree

PR:		221730
Submitted by:	lbartoletti@tuxfamily.org
[ 00:17 acm ] Original commit   Revision:448949
448949 devel/Makefile
448949 devel/py-lazr.config
448949 devel/py-lazr.config/Makefile
448949 devel/py-lazr.config/distinfo
448949 devel/py-lazr.config/pkg-descr
- New port: devel/py-lazr.config

The LAZR config system is typically used to manage process configuration.
Process configuration is for saying how things change when we run
systems on different machines, or under different circumstances.

This system uses ini-like file format of section, keys, and values.
The config file supports inheritance to minimize duplication of
information across files. The format supports schema validation.

WWW: https://launchpad.net/lazr.config
[ 00:15 acm ] Original commit   Revision:448948
448948 devel/Makefile
448948 devel/py-lazr.delegates
448948 devel/py-lazr.delegates/Makefile
448948 devel/py-lazr.delegates/distinfo
448948 devel/py-lazr.delegates/pkg-descr
- New port: devel/py-lazr.delegates

The lazr.delegates package makes it easy to write objects that delegate
behavior to another object. The new object adds some property or behavior on
to the other object, while still providing the underlying interface, and
delegating behavior.

WWW: https://launchpad.net/lazr.delegates
[ 00:12 acm ] Original commit   Revision:448947
448947 devel/Makefile
448947 devel/py-flufl.lock
448947 devel/py-flufl.lock/Makefile
448947 devel/py-flufl.lock/distinfo
448947 devel/py-flufl.lock/pkg-descr
- New port: devel/py-flufl.lock

This package is called flufl.lock. It is an NFS-safe file-based lock with
timeouts for POSIX systems.

WWW: https://flufllock.readthedocs.io
[ 00:11 acm ] Original commit   Revision:448946
448946 devel/Makefile
448946 devel/py-flufl.i18n
448946 devel/py-flufl.i18n/Makefile
448946 devel/py-flufl.i18n/distinfo
448946 devel/py-flufl.i18n/pkg-descr
- New port : devel/py-flufl.i18n

This package provides a high level, convenient API for managing
internationalization translation contexts in Python application. There is a
simple API for single-context applications, such as command line scripts which
only need to translate into one language during the entire course of their
execution. There is a more flexible, but still convenient API for multi-context
applications, such as servers, which may need to switch language contexts for
different tasks.

WWW: https://flufli18n.readthedocs.io
[ 00:08 dbaio ] Original commit   Revision:448944
448944 devel/Makefile
448944 devel/py-pyshp
448944 devel/py-pyshp/Makefile
448944 devel/py-pyshp/distinfo
448944 devel/py-pyshp/pkg-descr
New port devel/py-pyshp: Pure Python read/write support for ESRI Shapefile
format

The Python Shapefile Library (pyshp) provides read and write support for the
Esri Shapefile format. The Shapefile format is a popular Geographic Information
System vector data format created by Esri.

WWW: https://github.com/GeospatialPython/pyshp
[ 00:02 acm ] Original commit   Revision:448942
448942 devel/Makefile
448942 devel/py-atpublic
448942 devel/py-atpublic/Makefile
448942 devel/py-atpublic/distinfo
448942 devel/py-atpublic/pkg-descr
- New port: devel/py-atpublic

This is a very simple decorator and function which populates a module's
__all__ and optionally the module globals. This provides both a pure-Python
implementation and an optional C implementation.

WWW: http://public.readthedocs.io
Mon, 28 Aug 2017
[ 09:17 tota ] Original commit   Revision:448855
448855 devel/Makefile
448855 devel/R-cran-repr
448855 devel/R-cran-repr/Makefile
448855 devel/R-cran-repr/distinfo
448855 devel/R-cran-repr/pkg-descr
- Add new port: devel/R-cran-repr

  String and binary representations of objects for several formats /
  mime types.

  WWW: https://cran.r-project.org/web/packages/repr/
Thu, 24 Aug 2017
[ 15:04 mmokhi ] Original commit   Revision:448689
448689 devel/Makefile
448689 devel/breakpad
448689 devel/breakpad/Makefile
448689 devel/breakpad/distinfo
448689 devel/breakpad/files
448689 devel/breakpad/files/patch-Makefile.am
448689 devel/breakpad/files/patch-src_common_dwarf_elf__reader.cc
448689 devel/breakpad/files/patch-src_common_linux_dump__symbols.cc
448689 devel/breakpad/files/patch-src_common_linux_elfutils.cc
448689 devel/breakpad/files/patch-src_common_linux_memory__mapped__file.cc

(Only the first 10 of 13 ports in this commit are shown above. View all ports for this commit)
devel/breakpad: Add port to the tree
Breakpad is a set of client and server components which implement
a crash-reporting system.
This is YET ANOTHER STEP to build Electron.io for FreeBSD.

PR:		221320
Reported by:	Luca Pizzamiglio <luca.pizzamiglio@gmail.com>
Reviewed by:	cpm, lifanov, mat (mentor), mmokhi, ultima
Approved by:	cpm, lifanov, mat (mentor), mmokhi, ultima
Differential Revision:	https://reviews.freebsd.org/D11773
[ 13:05 tz ] Original commit   Revision:448666
448666 devel/Makefile
448666 devel/rubygem-peek-rails4
448666 devel/rubygem-peek-rails4/Makefile
448666 devel/rubygem-peek-rails4/Makefile~
Add slave-port: devel/rubygem-peek-rails4

Its devel/rubygem-peek but pulls in www/railties4 instead of railties5
to avoid conflicts between them
[ 09:40 tz ] Original commit   Revision:448662
448662 devel/Makefile
448662 devel/rubygem-peek-rblineprof
448662 devel/rubygem-peek-rblineprof/Makefile
448662 devel/rubygem-peek-rblineprof/distinfo
448662 devel/rubygem-peek-rblineprof/pkg-descr
New port: devel/rubygem-peek-rblineprof

Peek into how much time each line of your Rails application takes throughout a
request.

Things this peek view provides:
- Total time it takes to render individual lines within your codebase
- Total network time spent waiting per line

You can also drill down to only certain parts of your codebase like:
- app, everything within Rails.root/(app|lib)
- views, everything within Rails.root/app/view
- gems, everything within Rails.root/vendor/gems
- all, everything within Rails.root
- stdlib

WWW: https://github.com/peek/peek-rblineprof
[ 09:34 tz ] Original commit   Revision:448660
448660 devel/Makefile
448660 devel/rubygem-rblineprof
448660 devel/rubygem-rblineprof/Makefile
448660 devel/rubygem-rblineprof/distinfo
448660 devel/rubygem-rblineprof/pkg-descr
New port: devel/rubygem-rblineprof

rblineprof shows you lines of code that are slow.

WWW: https://github.com/tmm1/rblineprof
[ 09:25 tz ] Original commit   Revision:448659
448659 devel/Makefile
448659 devel/rubygem-debugger-ruby_core_source
448659 devel/rubygem-debugger-ruby_core_source/Makefile
448659 devel/rubygem-debugger-ruby_core_source/distinfo
448659 devel/rubygem-debugger-ruby_core_source/pkg-descr
New port: devel/rubygem-debugger-ruby_core_source

Provide Ruby core source files for C extensions that need them.

Fork of ruby_core_source that uses included Ruby headers (*.h and *.inc) instead
of downloading them. Used by debugger.

WWW: https://github.com/cldwalker/debugger-ruby_core_source
[ 09:16 tz ] Original commit   Revision:448657
448657 devel/Makefile
448657 devel/rubygem-peek-redis
448657 devel/rubygem-peek-redis/Makefile
448657 devel/rubygem-peek-redis/distinfo
448657 devel/rubygem-peek-redis/pkg-descr
New port: devel/rubygem-peek-redis

Take a peek into the Redis calls made within your Rails application.

Things this peek view provides:
- Total number of Redis commands called during the request
- The duration of the calls made during the request

WWW: https://github.com/peek/peek-redis
[ 09:12 tz ] Original commit   Revision:448655
448655 devel/Makefile
448655 devel/rubygem-peek-sidekiq
448655 devel/rubygem-peek-sidekiq/Makefile
448655 devel/rubygem-peek-sidekiq/distinfo
448655 devel/rubygem-peek-sidekiq/pkg-descr
New port: devel/rubygem-peek-sidekiq

Provide a peek into the Sidekiq calls made within your Rails application.

Things this peek view provides:
- Duration spent in Sidekiq calls
- Number of calls this page created

WWW: https://github.com/suranyami/peek-sidekiq
Wed, 23 Aug 2017
[ 19:40 bsam ] Original commit   Revision:448636
448636 devel/Makefile
448636 devel/gogland-eap
448636 devel/gogland-eap/Makefile
448636 devel/gogland-eap/distinfo
448636 devel/gogland-eap/files/gogland-eap.desktop.in
448636 devel/gogland-eap/files/gogland.in
448636 devel/gogland-eap/files/pycharm-ce.desktop.in
448636 devel/gogland-eap/files/pycharm.in
448636 devel/gogland-eap/pkg-descr
448636 devel/gogland-eap/pkg-plist
New port: devel/gogland-eap (Gogland EAP, Preview Edition).

Gogland is the codename for a new commercial IDE by JetBrains aimed at
providing an ergonomic environment for Go development.

The new IDE extends the IntelliJ platform with the coding assistance and
tool integrations specific for the Go language.
[ 18:47 bsam ] Original commit   Revision:448635
448635 devel/Makefile
448635 java/Makefile
java/intellij-pycharm -> devel/pycharm-ce: Disconnect the former and connect the
latter.
[ 16:54 tz ] Original commit   Revision:448630
448630 devel/Makefile
448630 devel/rubygem-peek-performance_bar
448630 devel/rubygem-peek-performance_bar/Makefile
448630 devel/rubygem-peek-performance_bar/distinfo
448630 devel/rubygem-peek-performance_bar/pkg-descr
New port: devel/rubygem-peek-performance_bar

Take a peek into the window.performance timing behind your app.

Things this peek view provides:
- Frontend
- Latency / Receiving
- Backend
- TCP / SSL
- Redirect
- DNS Lookup

WWW: https://github.com/peek/peek-performance_bar
[ 11:33 rene ] Original commit   Revision:448603
448603 LEGAL
448603 MOVED
448603 audio/Makefile
448603 audio/linux-neroaaccodec
448603 biology/Makefile
448603 biology/biojava
448603 devel/Makefile
448603 devel/gdb66
448603 devel/insight
448603 games/Makefile

(Only the first 10 of 26 ports in this commit are shown above. View all ports for this commit)
Remove expired ports:
2017-08-23 games/plee-the-bear: Broken for more than 6 months
2017-08-23 x11-themes/kde-icons-umicons: Broken for more than 6 months
2017-08-23 lang/bigloo: Broken for more than 6 months
2017-08-23 audio/linux-neroaaccodec: Broken for more than 6 months
2017-08-23 x11-themes/kde-icons-dark-glass: Broken for more than 6 months
2017-08-23 misc/fortune-mod-ferengi_rules_of_acquisition: Broken for more than 6
months
2017-08-23 misc/fortune-mod-culmea-culmilor: Broken for more than 6 months
2017-08-23 misc/xyzcmd: Broken for more than 6 months
2017-08-23 russian/fortuneru: Broken for more than 6 months
2017-08-23 security/bdc: Broken for more than 6 months
2017-08-23 x11-themes/kde-icons-icosx: Broken for more than 6 months
2017-08-23 devel/insight: Broken for more than 6 months
2017-08-23 devel/gdb66: Broken for more than 6 months
2017-08-23 biology/biojava: Broken for more than 6 months
2017-08-23 games/xroach: Broken for more than 6 months
Mon, 21 Aug 2017
[ 20:43 sunpoet ] Original commit   Revision:448490
448490 devel/Makefile
448490 devel/rubygem-grape-route-helpers
448490 devel/rubygem-grape-route-helpers/Makefile
448490 devel/rubygem-grape-route-helpers/distinfo
448490 devel/rubygem-grape-route-helpers/pkg-descr
Add rubygem-grape-route-helpers 2.1.0

grape-route-helpers provides named route helpers for Grape APIs, similar to
Rails' route helpers.

WWW: https://github.com/reprah/grape-route-helpers
Sun, 20 Aug 2017
[ 13:30 dbaio ] Original commit   Revision:448424
448424 devel/Makefile
448424 devel/py-pysparklines
448424 devel/py-pysparklines/Makefile
448424 devel/py-pysparklines/distinfo
448424 devel/py-pysparklines/files
448424 devel/py-pysparklines/files/patch-setup.py
448424 devel/py-pysparklines/pkg-descr
New port: devel/py-pysparklines

Python unicode sparkline generation library

pysparklines is a unicode sparkline generation library.
Python clone of https://github.com/holman/spark
Takes series data via stdin, command line, or API and prints a sparkline
representation. Output is always UTF-8 encoded.

WWW: https://github.com/RedKrieg/pysparklines

Number of commits found: 6937 (showing only 100 on this page)

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11  »  [Last Page]

Login
User Login
Create account

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD

This site
What is FreshPorts?
About the authors
Issues
FAQ
How big is it?
The latest upgrade!
Privacy
Forums
Blog
Contact

Search
Enter Keywords:
 
more...

Latest Vulnerabilities
opensslNov 02
openssl-develNov 02
wordpressNov 01
php56Oct 30
php70Oct 30
php71Oct 30
wiresharkOct 30
chromiumOct 28
wgetOct 27
wgetOct 27
openoffice-4*Oct 26
openoffice-devel*Oct 26
gitlabOct 25
nodeOct 25
node4Oct 25

No vulnerabilities have been reported in the past 14 days

* - modified, not new

All vulnerabilities


Ports
Home
Categories
Deleted ports
Sanity Test Failures
Newsfeeds

Statistics
Graphs
NEW Graphs (Javascript)
Traffic

Calculated hourly:
Port count 31876
Broken 126
Deprecated 55
Ignore 364
Forbidden 0
Restricted 175
No CDROM 78
Vulnerable 50
Expired 11
Set to expire 47
Interactive 0
new 24 hours 6
new 48 hours12
new 7 days3212
new fortnight3397
new month3453

Servers and bandwidth provided by
New York Internet, SuperNews, and RootBSD
Valid HTML, CSS, and RSS.
Copyright © 2000-2017 Dan Langille. All rights reserved.