graphics/proj: Update to 9.1.0

Release notes:
https://proj.org/news.html#id37

Also remove proj-data dependency.

You can use proj to retrieve data or install graphics/proj-data
manually.

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

graphics: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  "Waitman Gobble" <uzimac@da3m0n8t3r.com>
  *  Aaron Dalton <aaron@FreeBSD.org>
  *  Abel Chow <ozsanh45vds001@sneakemail.com>
  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Ade Lovett <ade@FreeBSD.org>
  *  Ade Lovett <ade@lovett.com>
  *  Akinori MUSHA aka knu <knu@idaemons.org>
  *  Aldis Berjoza <aldis@bsdroot.lv>
  *  Alex Hayward <xelah@xelah.com>
  *  Alex Ivasyuv <siegerstein@pochta.ru>
  *  Alex Samorukov <samm@os2.kiev.ua>

graphics/libgeotiff: Update to 1.7.1

Changes:	https://github.com/OSGeo/libgeotiff/releases
		https://lists.osgeo.org/pipermail/geotiff/2022-March/000884.html

graphics/libgeotiff: Update to 1.7.0

Changes:	https://github.com/OSGeo/libgeotiff/blob/master/libgeotiff/NEWS
		https://lists.osgeo.org/pipermail/geotiff/2021-July/000880.html

Remove # $FreeBSD$ from Makefiles.

Update BUILD_DEPENDS

graphics/proj: Update to 7.2.0

Changelog:
  - https://proj.org/news.html#release-notes

graphics/proj: Update to 7.1.1

- Add a pkg-message explaining how to access or sync datum grids from the CDN
  (disabled by default)
- Add curl and tiff dependencies since proj can read datum grids from remote
  COG (Cloud Optimized Geotiff)
- Take maintainer'ship (ok wen@)

PR:		245611
Submitted by:	wen (first version)
Reviewed by:	wen, rhurlin
Approved by:	wen
Exp-run by:	antoine

Update to 1.6.0

Changes:	https://github.com/OSGeo/libgeotiff/blob/master/libgeotiff/NEWS
		https://lists.osgeo.org/pipermail/geotiff/2020-April/000874.html

Add BUILD_DEPENDS

graphics/libgeotiff 1.5.0+ requires proj 6+.

Update graphics/libgeotiff to 1.5.1

- Bump PORTREVISION of dependent ports for shlib change

Changes:	https://github.com/OSGeo/libgeotiff/blob/master/libgeotiff/NEWS
		https://lists.osgeo.org/pipermail/geotiff/2019-March/000861.html
		https://lists.osgeo.org/pipermail/geotiff/2019-March/000862.html

Revert libgeotiff changes in r505194 to provide correct commit log

- Update to 6.1.0 and fix some ports
- Add missing DEPENDS
- Add TEST_TARGET
- Take maintainership

PR:		237932, 238795
Submitted by:	wenheping2000@hotmail.com,rhurlin@gwdg.de
Approved by:	maintainer(timeout, > 30 days), portmgr@(implicit, fix build)
Exp-run by:	antoine@
Thanks to:	antoine@, sunpoet@, rhurlin@gwdg.de

Update to 1.4.3

- Update WWW

Changes:	https://github.com/OSGeo/libgeotiff/blob/master/libgeotiff/ChangeLog
		https://lists.osgeo.org/pipermail/geotiff/2018-December/000846.html

Update MASTER_SITES

Update WWW

Convert PORTDATA=* to PLIST entries

- Update to 1.4.2

Changes:	http://lists.osgeo.org/pipermail/metacrs/2016-August/000911.html
		https://svn.osgeo.org/metacrs/geotiff/trunk/libgeotiff/ChangeLog

Remove ${PORTSDIR}/ from dependencies, categories d, e, f, and g.

With hat:	portmgr
Sponsored by:	Absolight

- Add LICENSE_FILE

Convert to USES=jpeg

- Update graphics/proj to 4.9.1
- Bump PORTREVISION to chase the update of proj

PR:		200434
Submitted by:	wen@(myself)
Approved by:	maintainer(timeout, >20 days)

Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.

- Update to 1.4.1
- Add LICENSE
- Strip shared library
- Use PORTDATA

Changes:	http://lists.osgeo.org/pipermail/metacrs/2014-September/000790.html
		https://svn.osgeo.org/metacrs/geotiff/trunk/libgeotiff/ChangeLog

Cleanup plist

- Switch to USES=libtool, drop .la files
- Bump dependent ports as .so version has changed

Approved by:	portmgr blanket

Bump PORTREVISION for jbigkit library version bump.

Approved by:	portmgr (implicit)

- Convert to new LIB_DEPENDS format
- Support STAGEDIR

Add NO_STAGE all over the place in preparation for the staging support (cat:
graphics)

- Use single space after WWW:

- Cleanup Makefile header

- Bump PORTREVISION to chase the update of graphics/proj

- Update to 1.4.0
- Use DATADIR for EPSG database

Changes:       
http://lists.maptools.org/pipermail/geotiff/2012-April/000719.html
                https://svn.osgeo.org/metacrs/geotiff/trunk/libgeotiff/ChangeLog

- Remove obsolete MD5 checksum

- Use LOCAL/sunpoet as backup MASTER_SITES

Approved by:    pgollucci (mentor)

- Update MAINTAINER to my FreeBSD.org address

Approved by:    pgollucci (mentor)

- Update to 1.3.0

PR:             ports/146531
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net> (maintainer)
Approved by:    wen@ (He is on vacation. I've his permission for commit your Pr)

- Update MASTER_SITES and WWW
- Pass maintainership to submitter.

PR:             ports/146345
Submitted by:   Sunpoet Po-Chuan Hsieh <sunpoet@sunpoet.net>

- update to jpeg-8

- Chase graphics/proj shlib bump

- update to jpeg7
Tested by:      pav on pointyhat

- Does not need these CFLAGS to build

PR:             ports/126397 (related to)
Reported by:    Michael Harnois <mdharnois@gmail.com>

Conversion from (now defunct) autoconf-2.61 to autoconf-2.62

Tested by:      exp build run (erwin)

- Update to 1.2.5

PR:             126172
Submitted by:   Ports Fury

- Update to 1.2.4

PR:             122498
Submitted by:   Ports Fury

- Update to 1.2.3

PR:             118598
Submitted by:   Ports Fury

If you love them, set them free.

Attempt to fix build on amd64.

Reported by:    kris

Add libgeotiff, a library for reading and writing GeoTIFF tags.