The recently imposed "must be logged in" restriction is a response to increased bot traffic on the site. This affects search, commits, and vuxml pages.
Search engines are not blocked. Try using "site:www.freshports.org" and your search terms.
This service is getting updated while this announcement is displayed. Commit processing is paused. Started at 16:21 - expected finish: 19:00 (was 18:00) UTC
Port details
py-pytest-xdistPytest xdist plugin for distributed testing and loop-on-failing modes
3.8.0,1develΣ=1 3.8.0,1Version of this port present on the latest quarterly branch.
The pytest-xdist plugin extends py.test with some unique test execution modes:
* Test run parallelization: if you have multiple CPUs or hosts you can use
those for a combined test run. This allows to speed up development or to
use special resources of remote machines.
* --boxed: (not available on Windows) run each test in a boxed subprocess
to survive SEGFAULTS or otherwise dying processes
* --looponfail: run your tests repeatedly in a subprocess. After each run
py.test waits until a file in your project changes and then re-runs the
previously failing tests. This is repeated until all tests pass after
which again a full run is performed.
* Multi-Platform coverage: you can specify different Python interpreters
or different platforms and run tests in parallel on all of them.
NOTE: If this package has multiple flavors (see below), then use one of them instead of the name specified above. NOTE: This is a Python port. Instead of py312-pytest-xdist listed in the above command, you can pick from the names under the Packages section.
===> The following configuration options are available for py312-pytest-xdist-3.8.0,1:
PSUTIL=on: Detect number of available CPUs
SETPROCTITLE=on: Indicate state of current running workers
===> Use 'make config' to modify these settings
devel/py-setuptools-scm: update to 8.0.4
Directory and PORTNAME changed to match normalised name in release
tarball; consumers updated to match.
Although setuptools itself is specified as a run dependency in the
Python package metadata, it is currently left out here to prevent
environment pollution until at least PR 270510 is committed.
Additionally, this version of setuptools-scm requires setuptools>=61,
which means this version is only meant for USE_PYTHON=pep517 ports
as all USE_PYTHON=distutils ports will switch to devel/py-setuptools58
also after PR 270510. science/py-emmet-core is switched to
devel/py-setuptools_scm7 accordingly, as it specifies setuptools-scm<8.
devel/py-{flit-scm,hatch-vcs} have ${PY_SETUPTOOLS} added to
RUN_DEPENDS to compensate.
Further details: https://wiki.freebsd.org/Python/setuptools
Reported by: yuri
Co-authored by: matthew
Exp-run by: antoine (earlier iteration)
Approved by: yuri (science/py-emmet-core, previous iteration)
PR: 272134
Differential Revision: https://reviews.freebsd.org/D39288
devel/py-pytest-xdist: Update to 3.3.1
* Introduce default PSUTIL and SETPROCTITLE options to reflect the
settings as noted in "pyproject.toml".
* Switch to the PEP517 build framework.
* Update test suite and use USE_PYTHON=pytest to simplify the Makefile.
* Errors like this one [1] should be remedied with this update:
[...]
INTERNALERROR> File
"/usr/local/lib/python3.9/site-packages/xdist/scheduler/each.py", line 1, in
<module>
INTERNALERROR> from py.log import Producer
INTERNALERROR> ModuleNotFoundError: No module named 'py.log'; 'py' is not a
package
(Only the first 15 lines of the commit message are shown above )
all: remove explicit versions in USES=python for "3.x+"
The logic in USES=python will automatically convert this to 3.8+ by
itself.
Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.
finance/quickfix: mark BROKEN with PYTHON
libtool: compile: c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
^~~~~~~~~~
1 warning and 1 error generated.
Reviewed by: portmgr, vishwin, yuri
Differential Revision: <https://reviews.freebsd.org/D40568>
Remove WWW entries moved into port Makefiles
Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
Add WWW entries to port Makefiles
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
(Only the first 15 lines of the commit message are shown above )
devel: remove 'Created by' lines
A big Thank You to the original contributors of these ports:
* "Waitman Gobble" <uzimac@da3m0n8t3r.com>
* <jkoshy@FreeBSD.org>
* Aaron Dalton <aaron@FreeBSD.org>
* Aaron Dalton <aaron@daltons.ca>
* Aaron H. K. Diep <ahkdiep@gmail.com>
* Aaron Hurt <ahurt@anbcs.com>
* Abel Chow <abel_chow@yahoo.com>
* Adam McLaurin
* Adam Saponara <as@php.net>
* Adam Weinberger <adamw@FreeBSD.org>
* Ade Lovett <ade@FreeBSD.org>
(Only the first 15 lines of the commit message are shown above )
Convert Python ports to FLAVORS.
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
(Only the first 15 lines of the commit message are shown above )
[NEW] devel/py3-pytest-xdist: Create Python 3.x version of port
The latest www/py-requests update [1] unbundled its dependencies, now
requiring chardet, idna, urllib3 and certifi from ports.
www/py3-requests port was not tested during QA, which would have highlighted
the need for many new py3-* ports (and their dependencies).
This change creates one of those ports.
[1] https://svnweb.freebsd.org/changeset/ports/442565
PR: 219833
Invoke pytest from within desired python version
When testing a port for a non-default python py.test may fail to find
dependencies for default version because they weren't built e.g.,
$ make test PYTHON_VERSION=python3.5 -C devel/py-apscheduler
[...]
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/local/lib/python3.5/site-packages/_pytest/config.py", line 319, in
_importconftest
mod = conftestpath.pyimport()
File "/usr/local/lib/python3.5/site-packages/py/_path/local.py", line 650, in
pyimport
__import__(modname)
File
"/usr/ports/devel/py-apscheduler/work/APScheduler-3.2.0/tests/conftest.py", line
8, in <module>
from apscheduler.job import Job
File
"/usr/ports/devel/py-apscheduler/work/APScheduler-3.2.0/apscheduler/job.py",
line 4, in <module>
import six
ImportError: No module named 'six'
ERROR: could not load
/usr/ports/devel/py-apscheduler/work/APScheduler-3.2.0/tests/conftest.py
Approved by: portmgr blanket
devel/py-pytest-xdist: Update to 1.13.1
- Update PORTVERSION and distinfo checksum (1.13.1)
- Match COMMENT to setup.py:description
- Enable 'concurrent' Python support
- Add NO_ARCH
- Update test target to new conventions
- Remove __pycache__ from WRKSRC/testing
- Update pkg-descr WWW: URL to match next version and new repo URL
Changes:
https://github.com/pytest-dev/pytest-xdist/blob/v1.13.1/CHANGELOG
[NEW] devel/py-pytest-xdist: Py.test plugin for distributed testing
The pytest-xdist plugin extends py.test with some unique test execution modes:
* Test run parallelization: if you have multiple CPUs or hosts you can use
those for a combined test run. This allows to speed up development or to
use special resources of remote machines.
* --boxed: (not available on Windows) run each test in a boxed subprocess
to survive SEGFAULTS or otherwise dying processes
* --looponfail: run your tests repeatedly in a subprocess. After each run
py.test waits until a file in your project changes and then re-runs the
previously failing tests. This is repeated until all tests pass after
which again a full run is performed.
* Multi-Platform coverage: you can specify different Python interpreters
or different platforms and run tests in parallel on all of them.
WWW: http://bitbucket.org/hpk42/pytest-xdist
