GStreamer1: Update to 1.26.5

Rename multimedia/gstreamer1-validate -> devel/gstreamer1-devtools and
update to 1.26.5. gst-validate has been gst-devtools since 1.17.x, but
got lost in the mix. This a development toolkit, hence the move to the
devel category.

https://gstreamer.freedesktop.org/releases/1.26/#1.26.5

GStreamer1: Update to 1.26.4

multimedia/gstreamer1-plugins-rust: Update to 0.14.0

Add custom target to update the distinfo files for the whole suite
depending on _GST1_VERSION for maintainer QoL.

https://gstreamer.freedesktop.org/releases/1.26/#1.26.4

GStreamer1: Update to 1.26.3

https://gstreamer.freedesktop.org/releases/1.26/#1.26.3

Security:	69bfe2a4-5a39-11f0-8792-4ccc6adda413

lang/rust: Bump revisions after 1.88.0

PR:		287766

GStreamer1: Update to 1.26.2

multimedia/gstreamer1-plugins-rust: Update to 0.13.6

https://gstreamer.freedesktop.org/releases/1.26/#1.26.2

lang/rust: Bump revisions after 1.87.0

PR:		286829

GStreamer: Update to 1.26.1

https://gstreamer.freedesktop.org/releases/1.26/#1.26.1

lang/rust: Bump revisions after 1.86.0

PR:		285840

GStreamer: Update to 1.26.0

https://gstreamer.freedesktop.org/releases/1.26/

lang/rust: Bump revisions after 1.85.0

PR:		284884

GStreamer: Update to 1.24.12

https://gstreamer.freedesktop.org/releases/1.24/#1.24.12

multimedia/gstreamer1: fix riscv64 typo

lang/rust: Bump revisions after 1.84.0

PR:		283962

GStreamer: Update to 1.24.11

https://gstreamer.freedesktop.org/releases/1.24/#1.24.11

GStreamer: Update to 1.24.10

https://gstreamer.freedesktop.org/releases/1.24/#1.24.10

Security:	7256fae8-b3e8-11ef-b680-4ccc6adda413,
		750ab972-b3e8-11ef-b680-4ccc6adda413,
		772d8625-b3e8-11ef-b680-4ccc6adda413,
		7945c543-b3e8-11ef-b680-4ccc6adda413,
		7b34ddf7-b3e8-11ef-b680-4ccc6adda413,
		7d1b4e5d-b3e8-11ef-b680-4ccc6adda413,
		7f3a302b-b3e8-11ef-b680-4ccc6adda413

lang/rust: Bump revisions after 1.83.0

PR:		283000

lang/rust: Bump revisions after 1.82.0

PR:		282516

Gstreamer: Update to 1.24.9

https://gstreamer.freedesktop.org/releases/1.24/#1.24.9

Security:	d48a2224-9b4c-11ef-bdd9-4ccc6adda413

multimedia/gstreamer1: Update to 1.24.8

Mk/Uses/gstreamer.mk:
- Sort, fix whitespace issues and typos
- Promote several common variables to improve maintainer QOL
*   There's now no need to set manually set PORTVERSION nor
    SOVERSION in several Makefiles
*   This will help to prevent not updating some components
*   A note has been added, however, to remind maintainers
    to remake distinfo for certain ports
- Improve documentation

multimedia/gstreamer1-plugins-webrtc:
- New port split from multimedia/gstreamer1-plugins-bad
- multimedia/gstreamer1-plugins-rust has been updated

multimedia/gstreamer1*: Update to upstream release 1.22.10

*/*: Sanitize MANPREFIX for meson ports

Approved by:	portmgr

Update gstreamer1 to upstream release 1.22.5

PR:		272141, 271505
MFH:		2023Q3

all: remove explicit versions in USES=python for "3.x+"

The logic in USES=python will automatically convert this to 3.8+ by
itself.

Adjust two ports that only had Python 3.7 mentioned but build fine
on Python 3.8 too.

finance/quickfix: mark BROKEN with PYTHON

libtool: compile:  c++ -DHAVE_CONFIG_H -I. -I../.. -I -I. -I.. -I../.. -I../C++
-DLIBICONV_PLUG -DPYTHON_MAJOR_VERSION=3 -Wno-unused-variable
-Wno-maybe-uninitialized -O2 -pipe -DLIBICONV_PLUG -fstack-protector-strong
-fno-strict-aliasing -DLIBICONV_PLUG -Wall -ansi
-Wno-unused-command-line-argument -Wpointer-arith -Wwrite-strings
-Wno-overloaded-virtual -Wno-deprecated-declarations -Wno-deprecated -std=c++0x
-MT _quickfix_la-QuickfixPython.lo -MD -MP -MF
.deps/_quickfix_la-QuickfixPython.Tpo -c QuickfixPython.cpp  -fPIC -DPIC -o
.libs/_quickfix_la-QuickfixPython.o
warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean
'-Wno-uninitialized'? [-Wunknown-warning-option]
QuickfixPython.cpp:175:11: fatal error: 'Python.h' file not found
          ^~~~~~~~~~
1 warning and 1 error generated.

Reviewed by:	portmgr, vishwin, yuri
Differential Revision:	<https://reviews.freebsd.org/D40568>

Update gstreamer1 to upstream release 1.22.4

PR:		272141, 272100

Update gstreamer1 to upstream release 1.22.2

PR:		271021

Differential Revision:	https://reviews.freebsd.org/D39818

multimedia/gstreamer1: drop LIBUNWIND option to fix build on non-x86

libunwind is enabled unconditionally now.

multimedia/gstreamer1: track bash-completion + elfutils dependencies

Error: /usr/local/lib/libgstreamer-1.0.so.0.2200.0 is linked to
/usr/local/lib/libdw.so.1 from devel/elfutils but it is not declared as a
dependency
Warning: you need LIB_DEPENDS+=libdw.so:devel/elfutils

Error: Orphaned: libexec/gstreamer-%%VERSION%%/gst-completion-helper
Error: Orphaned: share/bash-completion/completions/gst-inspect-%%VERSION%%
Error: Orphaned: share/bash-completion/completions/gst-launch-%%VERSION%%
Error: Orphaned: share/bash-completion/helpers/gst

PR:		270361

multimedia/gstreamer1: Update to 1.22, new stable branch.

PR:		269895
Exp-run by:	antoine
Sponsored by:   Serenity Cybersecurity, LLC

multimedia/gstreamer1: Update to 1.20.6

Sponsored by:	Serenity Cybersecurity, LLC

Update gstreamer1 to upstream release 1.20.5

PR:		268501

multimedia/gstreamer1: Update description to refer to gst-play

PR:		256953
Reported by:	grahamperrin

Update gstreamer1 to upstream release 1.20.4

PR:		267075

multimedia/gstreamer1: Fix plist when NLS is disabled

Update gstreamer1 to upstream release 1.20.3

PR:		261585
Reviewed by:	riggs,jbeich,tcberner

Differential Revision:	https://reviews.freebsd.org/D36850

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

multimedia: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Aaron LI <aly@aaronly.me>
  *  Alexander Botero-Lowry <alexbl@FreeBSD.org>
  *  Alexander Logvinov <ports@logvinov.com>
  *  Alexey Dokuchaev <danfe@FreeBSD.org>
  *  Anders Nordby <anders@FreeBSD.org>
  *  Andrew Pantyukhin <infofarmer@FreeBSD.org>
  *  Andrew Thompson <andy@fud.org.nz>
  *  Andrew Thompson <thompsa@FreeBSD.org>
  *  Angel Carpintero <ack@telefonica.net>
  *  Anish Mistry (with help from mean)
  *  Anonymous <swell.k@gmail.com>

multimedia/gstreamer1: Make pkg-plist PREFIX safe

PR:		245242
Approved by:	multimedia (maintainer timeout)

multimedia/gstreamer1: Add CPE information

Approved by:	portmgr (blanket)

multimedia/gstreamer1: fix LICENSE, update WWW

Also remove needless dependency on gettext for WITHOUT=NLS case

Approved by:	portmgr blanket

Remove # $FreeBSD$ from Makefiles.

Update devel/gmake to 4.3.

Some changes have been made in this release that break backwards
compatibility.  Let USES=gmake force users to upgrade to this version so
port maintainers don't have to support older versions.

PR:		245725
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Update gstreamer1 to 1.16.2.

- The spc plugin was removed inflavor for the gsm plugin.
- Added in tree qt plugin.

Changelog: https://gstreamer.freedesktop.org/releases/1.16/#1.16.2

Update net-im/fractal to 4.2.2 to support GStreamer 1.16 (approved by
maintainer)

Thanks to antoine@ for the exp-run.

PR:		239386

devel/glib20: remove runtime dep on perl5

Since glib-mkenums was rewritten in python in glib 2.53.5, glib20 seems
to no longer need perl5 at runtime. This makes perl5 a build dep only.

Removing the run dep causes some other ports to fail, so add the build
dep to those where needed.

PR:		233138
Approved by:	gnome (kwm, maintainer, older version of patch)
Exp-run by:	antoine

Update GStreamer to 1.14.4.

PR:		231406
Submitted by:	Greg V <greg@unrelenting.technology>
Exp-run by:	antoine
Approved by:	portmgr (antoine)

Add explicit USES=python

Update GStreamer 1.x suite to 1.12.3.

ChangeLog: https://gstreamer.freedesktop.org/releases/1.12/#1.12.3

Update GStreamer1 ports to 1.12.2.

Rework the adding of dependancies in Mk/bsd.gstreamer.mk.
Previous when using USE_GSTREAMER[1] it would just add the request modules to
BUILD/RUN_DEPENDS. This caused the qa script to complain because the old code
didn't implicit depend on the gstreamer1 and gstreamer1-plugins[-bad] ports for
the libraries they carried, even if they where present via the plugins! The new
code adds implicit depends on these ports so USE_GSTREAMER[1] using ports have
all the libraries included.

* The mad mp3 plugin was removed, mpg123 plugin also provides mp3 decoding.
Switch over ports that used the gstreamer1 mad plugin.
* gtksink plugin renamed -> gtk
* Hook up the sndio plugin into the framework
* Add some indirect dependacies where needed
* Reorder the plugin list in bsd.gstreamer.mk so only one plugin per line. When
changing plugins it doesn't result in multiple lines being changed.
* Remove mentions in bsd.gstreamer.mk of plugins mentions that where removed.
* Depend on libunwind on i386/amd64, GStreamer links to it if it is present.

PR:		220753
Exp-run by:	antoine@

Remove the libcheck option, it not a external dependancy anymore. And
always build the GStreamer libcheck parts.

Move devel/libcheck to devel/check

- Bump PORTREVISION for dependent ports

- Remove always-true/false conditions after FreeBSD 9, 10.1, 10.2 EOL

Approved by:	portmgr blanket

Remove ${PORTSDIR}/ from dependencies, categories m, n, o, and p.

With hat:	portmgr
Sponsored by:	Absolight

Update GStreamer1 ports to 1.8.0.

ChangeLog: https://gstreamer.freedesktop.org/releases/1.8/

Update GStreamer suite to 1.6.3.

Update GStreamer1 to 1.6.2.
Update GStreamer1-vaapi to 0.7.0.

* Spell GStreamer consistently. [1]
* Fix typo in py3kplist in py3-gstreamer1 [1]
* Improve plugins COMMENTS (more improvements welcome)
* Actually include the gstreamer1-libav update this time.

PR:		204204 [1] (based on)
Submitted by:	olivierd@ [1]

Update Gstreamer suite to 1.6.1.

Update gstreamer1 ports to 1.6.0.

* gstreamer1-libav now uses ffmpeg from ports.
* New ports:
  * gstreamer1-validate: Tools to detect if elements are not behaving
    as expected, mainly aimed at developers, or advanced debugging.
  * gstreamer1-rtsp-server: Base foundation for building a rtsp
    server ontop of GStreamer
 * Bunch of new plugins like: mpg123, rsvg, libde265, openh264, x265 and dtls.

Release announcement:
 
http://lists.freedesktop.org/archives/gstreamer-announce/2015-September/000357.html

Obtained from:	gnome devel repo

By default libtool replaces -export-symbols <file> with -retain-symbols-file
<file> on ELF systems, but this doesn't really do what -export-symbols is
meant to do.  On GNU ELF systems it converts <file> to a simple version
script first and then uses -version-script instead of -retain-symbols-file.
Let USES=libtool patch libtool scripts to do this on all systems with GNU
ld(1).

Bump PORTREVISION on all ports where the build log contains -export-symbols.

audio/calf: This port builds a module that now exports only one function,
but it also builds a number of executables that link to this module and
expect to see other functions.  Because it's already a bit dodgy to link to
a module (libtool warns about this) let the module continue to export only
one function and instead build an ordinary library from the same source that
the executables can link to.  Fix a number of other issues in the same

Update Gstreamer framework to 1.4.5.

Big Gstreamer update:

Update gstreamer, gstreamer-plugins, -good, -bad and -ugly ports to 1.4.4.
Update gstreamer1-plugins-gnonlin to 1.4.0.
Update py-gstreamer1 and py3-gstreamer1 to 1.4.0.

Add multimedia/gstreamer1-editing-services. GES is a high-level library
for facilitating the creation of audio/video non-linear editors.

Add pulseaudio plugin now that pulseaudio is updated and add the gl plugin.

Drop :keepla from USES=libtool.
Drop @dirrm[try] from plists and drop gnomehier from USE_GNOME
Switch to optionhelpers in multimedia/gstreamer1.

PR:		194922 (merged with my own WIP)
Submitted by:	olivierd

Update gstreamer 1.0 ports to version 1.2.4.

When linking a library libA with a library libB using libtool, if libB.la
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la.  So everything that subsequently links with libA will also
link to these extra libraries.  This causes too much overlinking.

This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging.  However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.

So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).

Add patch to make sure the mutex is locked before trying to unlock it.
This fixes a startup crash in cheese 3.12.

Submitted by:	Gustau Perez
Obtained from:	Gstreamer upstream

Update gstreamer to 1.2.3.

Switch from USE_GNOME=ltverhack to USES=libtool

Update to 1.2.2.

Remove vaapi from plugin list in bsd.gstreamer.mk it accidently snuck in.

Changelog:
http://lists.freedesktop.org/archives/gstreamer-devel/2013-December/045238.html

Update to 1.2.1.

Retire celt plugin, it was removed in flavor for the opus plugin.
Add new webp, kate and openjpeg plugin.

Stagify Gstreamer ports.
Fix build of gstreamer and gstreamer1 with glib 2.38.x [1].
Update gstreamer and gstreamer-plugins to new rules, USES=gmake pathfix,
new LIB_DEPENDS syntax.
Only pull in flex if base version is too old.
Be more selective for which OSVERSIONS we need gcc due to the clang bug.

Obtained from:	Gstreamer upstream [1]

Add NO_STAGE all over the place in preparation for the staging support (cat:
multimedia)

Update to 1.0.10.

Bug fix release.

Update to 1.0.9.

This is a bug fix release.
Changelog:
http://lists.freedesktop.org/archives/gstreamer-devel/2013-August/042360.html

Enable neon http plugin
Switch to new LIB_DEPEND format, use USES=gmake instead of USE_GMAKE
Utilize new introspection USE_GNOME component.
Allow gstreamer1-libav to play mp3's, note that mad plugin is still
prefered if available.

Add PORTSCOUT macro's to prevent from picking up development versions.

Also add USE_GCC=any as workaround for clang 3.3 crash on i386

Add Gstreamer 1.0.7. This is the new stable version of the
Gstreamer multimedia framework.

Use the USE_GSTREAMER1 macro to select Gstreamer 1.0 plugins. A new chapter
for the porters handbook about gstreamer is a work in progress.

X related plugins are now stand alone. The gio plugin is now part of the
gstreamer1-plugins port and the oss plugins are now part of the
gstreamer1-plugins-good port.

Note that the pulseaudio plugin is missing because it needs a newer version
of pulseaudio. Also there are still a number of plugins from -bad which
haven't been ported to the 1.0 API yet.